Environment-Assisted Cracking in Custom 465 Stainless Steel
Source abstract
Abstract
The influence of cold work and aging on the environment-assisted cracking (EAC) behavior and mechanical properties of Custom 465 stainless steel (SS) was studied. Four sets of specimens were made and tested. All specimens were initially solution annealed, rapidly cooled, and refrigerated (SAR condition). The first specimen set was steel in the SAR condition. The second specimen set was aged to the H1000 condition. The third specimen set was 60 pct cold worked, and the fourth specimen set was 60 pct cold worked and aged at temperatures ranging from 755 K to 825 K (482 °C to 552 °C) for 4 hours in air. The specimens were subsequently subjected to EAC and mechanical testing. The EAC testing was conducted, using the rising step load (RSL) technique, in aqueous solutions of NaCl of pH 7.3 with concentrations ranging from 0.0035 to 3.5 pct at room temperature. The microstructure, dislocation substructure, and crack paths, resulting from the cold work, aging, or subsequent EAC testing, were examined by optical microscopy, transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The aging of the cold-worked specimens induced carbide precipitation within the martensite lath, but not at the lath or packet boundaries. In the aged specimens, as aging temperature rose, the threshold stress intensity for EAC (KIEAC), elongation, and fracture toughness increased, but the strength and hardness decreased. The KIEAC also decreased with increasing yield strength and NaCl concentration. In the SAR and H1000 specimens, the EAC propagated along the prior austenite grain boundary, while in the cold-worked and cold-worked and aged specimens, the EAC propagated along the martensite lath, and its packet and prior austenite grain boundaries. The controlling mechanism for the observed EAC was identified to be hydrogen embrittlement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. R.B. Setterlund: Mater. Protect., 1965, vol. 4, pp. 27–29.
2. S.R. Novak: U.S. Steel Corp., Monroeville, PA, Jan. 1, 1968, AD825336L.
3. E. Snape: Corrosion, 1968, vol. 24, pp. 261–82.10.5006/0010-9312-24.9.261 ↗
4. J.W. Kennedy and J.A. Whittaker: Corr. Sci., 1968, vol. 8, pp. 359–75.10.1016/S0010-938X(68)90024-3 ↗
5. N.A. Tiner and C.B. Gilpin: Corrosion, 1966, vol. 22, pp. 271–79.10.5006/0010-9312-22.10.271 ↗
6. C.J. Slunder and W.K. Boyd: DMIC Report No. 151, Defense Metals Information Center, Battelle Memorial Institute, Columbus, OH, Apr. 14, 1961.
7. R. Perry: Special Report 86, The Iron and Steel Institute, London, 1964, p. 227.
8. C.S. Carter, D.G. Farwick, A.M. Ross, and J.M. Uchida: Boeing Document D6-25219, The Boeing Company, Seattle, WA, Feb. 1970.
9. H.P. Leckie: Proc. Conf. on Fundamental Aspects of Stress Corrosion Cracking, NACE, Houston, TX, 1969, p. 411.
10. R.A. Davis, G.A. Dreyer, and W.C. Gallaugher: Corrosion, 1964, vol. 20, p. 93t.10.5006/0010-9312-20.3.93t ↗
11. D.F. Bulloch, T.W. Eichenberger, and J.L. Guthrie: AFML-TR-68-57 and Boeing Document D6-19769-3, The Boeing Company, Seattle, WA, Mar. 1968, AD 833650.
12. J.L. Guthrie: Boeing Document D6A10093-2, Phase II-C Report FA-SS-66-5, The Boeing Company, Seattle, WA, Mar. 1967, AD 818490.
13. A.H. Rosenstein and M.R. Gross: Report 2448, Naval Ships Research and Development Center, Annapolis, MD., Sept. 1967, AD 821456.
14. J.H. Mulherin: Trans. ASME J. Basic Eng., 1966, vol. 88, Ser. D, pp. 777–82.10.1115/1.3645960 ↗
15. E. Snape: Br. Corr. J., 1969, vol. 4, pp. 253–59.10.1179/bcj.1969.4.5.253 ↗
16. C.S. Carter: Met. Trans., 1970, vol. 1, pp. 1551–59.10.1007/BF02642000 ↗
17. G.J. Biefer and J.G. Garrison: Internal Report PM-R-67-8, Physical Metallurgy Division, Department of Energy, Mines and Resources, Mines Branch, Ottawa, Canada, Mar. 14, 1967.
18. D. Webster: Boeing Document D6-23870, The Boeing Company, Seattle, WA, Feb. 1969, AD 687724.
19. W.D. Benjamin and E.A. Steigerwald: Technical Report AFML-TR-67-98, Air Force Materials Laboratory, Wright-Patterson Air Force Base, OH, Apr. 1967, AD 813716.
20. N. Taniguchi and A.R. Troiano: Trans. Iron Steel Inst. Jpn., 1969, vol. 9, pp. 306–12.10.2355/isijinternational1966.9.306 ↗
21. H.P. Leckie and A.W. Loginow: Corrosion, 1968, vol. 24, pp. 291–97.10.5006/0010-9312-24.9.291 ↗
22. ASM Handbook, vol. 8, Mechanical Testing, ASM INTERNATIONAL, Materials Park, OH, 1995, pp. 539–40.
23. 2009 Annual Book of ASTM Standards, Sect. 3, vol. 03.01, E 8/E 8M-08, ASTM International, Conshohocken, PA, 2009.
24. 2009 Annual Book of ASTM Standards, Sect. 3, vol. 03-01, E 399-08, ASTM International, Conshohocken, PA, 2009.
25. A.H. Priest: Met. Mater., 1969, vol. 3, p. 175.10.1007/BF00485721 ↗
26. A.J. Stavros and H.W. Paxton: Metall. Trans., 1970, vol. 1, pp. 3049–55.10.1007/BF03038418 ↗
27. G. Sandoz, C.T. Fujii, and B.F. Brown: Corr. Sci. 1970, vol. 10, pp. 839–45.10.1016/S0010-938X(70)80102-0 ↗
28. B.F. Brown, C.T. Fujii, and E.P. Dahlberg: J. Electrochem. Soc., 1969, vol. 116, pp. 218–19.10.1149/1.2411799 ↗
29. J.A. Smith, M.H. Peterson, and B.F. Brown: Corrosion, 1970, vol. 26, pp. 539–42.10.5006/0010-9312-26.12.539 ↗
30. Metals Handbook, vol. 13, Corrosion, 9th ed., ASM INTERNATIONAL, Metals Park, OH, 1987, pp. 145–63.
31. F. Zucchi, G. Trabanelli, and G. Demertzis: Corr. Sci., 1988, vol. 28, pp. 69–79.10.1016/0010-938X(88)90008-X ↗
32. R. D. Kane: Stainless Steels ‘84, The Institute of Metals, London, 1985, pp. 429–37.
33. Thierry Cassagne: Joint EFC NACE Workshop, Freiburg, Germany, Sept. 10, 2007.
34. G. Sandoz and R.L. Newbegin: Report of NRL Progress, Naval Research Laboratory, Washington, DC, May 1969, p. 29.
35. L. De Micheli, S.M.L. Agostinho, G. Trabanelli, and F. Zucchi: Mater. Res., 2002, vol. 5 (1).10.1590/S1516-14392002000100011 ↗
36. R.P. Wei, K. Klier, G.W. Simmons, and Y.T. Chou: in Hydrogen Embrittlement and Stress Corrosion Cracking, A Troiano Festschrift, R. Gibala and R.F. Hehemann, eds., ASM, Metals Park, OH, 1984, pp. 103–33.
37. A.S. Tetelman: in Hydrogen in Metals, I.M. Bernstein and A.W. Thompson, eds., ASM, Metals Park, OH, 1974, pp. 17–34.
38. H.H. Johnson: in Hydrogen in Metals, I.M. Bernstein and A.W. Thompson, eds., ASM, Metals Park, OH, 1974, pp. 35–49.
39. B.D. Beachem: Metall. Trans., 1973, vol. 3, Feb., pp. 437–51.
40. M.H. Peterson, B.F. Brown, R.L. Newbegin, and R.E. Groover: Corrosion, 1967, vol. 23, pp. 142–48.10.5006/0010-9312-23.5.142 ↗
41. D. Webster: Boeing Document D6-23973, The Boeing Co., Seattle, WA, June 1969, AD 695794.
42. Metals Handbook, vol. 13, Corrosion, 9th ed., ASM INTERNATIONAL, Metals Park, OH, 1987, pp. 244–82.
43. T.T. Shih and W.G. Clark, Jr.: in Environment-Sensitive Fracture, S.W. Dean, E.N. Pugh, and G.M. Uglansky, eds., ASTM STP 821, ASTM, Philadelphia, PA, 1984, pp. 325–40.10.1520/STP34441S ↗
44. C.S. Carter, D.E. Austin, and J.C. McMillan: Boeing Document D6-25459, The Boeing Co., Seattle, WA, Aug. 1970.