journal article·2011-07

Solid Solution Strengthening for Mg-3.0 Mass Pct (2.71 At. Pct)Al and Mg-0.06 Mass Pct (0.036 At. Pct)Ca Alloys

Yasumasa Chino, Motohisa Kado, Takamichi Ueda, Mamoru Mabuchi

Publisher page

Abstract

Tensile tests were carried out at 123 K to 373 K (–150 °C to 100 °C) on pure Mg, Mg-3.0 mass pct (2.71 at. pct) Al alloy, and Mg-0.06 mass pct (0.036 at. pct) Ca alloy. Little decrease occurred in the yield stress of the pure Mg and the Mg-Ca alloy with increasing temperature from 223 K to 373 K (–50 °C to 100 °C). For the Mg-Al alloy, however, its yield stress decreased with increasing temperature from 223 K to 373 K (–50 °C to 100 °C). Analyses based on the existing solid-solution strengthening theories, focusing on the athermal component of stress, revealed that the dominant strengthening mechanism is the shear modulus effect for the Mg-Ca alloy and the chemical interaction for the Mg-Al alloy. It is suggested that the shear modulus effect is dominant at a low concentration and the chemical interaction is dominant at a high concentration for Mg alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. M. Hakamada, T. Furuta, Y. Chino, Y. Chen, H. Kusuda, and M. Mabuchi: Energy, 2007, vol. 32, pp. 1352-60.10.1016/j.energy.2006.10.020 ↗
2. R.L. Fleischer: Acta Metall., 1961, vol. 9, pp. 996-1000.10.1016/0001-6160(61)90242-5 ↗
3. R.L. Fleischer: Acta Metall., 1963, vol. 11, pp. 203-09.10.1016/0001-6160(63)90213-X ↗
4. H. Suzuki: Sci. Rep. Res. Inst. Tohoku Univ., 1952, vol. A4, pp. 455-63.
5. H. Suzuki: Dislocations and Mechanical Properties of Crystals: The yield strength of Binary Alloys, J.C. Fisher, W.G. Johnston, and R. Thomason, eds., John Wiley and Sons Inc, New York, NY, 1957, pp. 361–90.
6. J.C. Fisher: Acta Metall., 1954, vol. 2, pp. 9-10.10.1016/0001-6160(54)90087-5 ↗
7. P.A. Flinn: Acta Metall., 1958, vol. 6, pp. 631-35.10.1016/0001-6160(58)90156-1 ↗
8. A.H. Cottrell: Dislocations and Plastic Flow in Crystals, Clarendon Press, Oxford, UK, 1953.
9. R.M. Quimby, J.D. Mote, and J.E. Dorn: Trans. ASM, 1962, vol. 55, pp. 149-57.
10. H. Yoshinaga and R. Horiuchi: Trans. JIM, 1963, vol. 4, pp. 134-41.10.2320/matertrans1960.4.134 ↗
11. A. Akhtar and E. Teghtsoonian: Trans. JIM, 1968, vol. 9, pp. 692-97.
12. A. Akhtar and E. Teghtsoonian: Acta Metall., 1969, vol. 17, pp.1339-49.10.1016/0001-6160(69)90151-5 ↗
13. A. Akhtar and E. Teghtsoonian: Acta Metall., 1969, vol. 17, pp.1351–56.10.1016/0001-6160(69)90152-7 ↗
14. A. Akhtar and E. Teghtsoonian: Phil. Mag., 1972, vol. 25, pp.897-916.10.1080/14786437208229311 ↗
15. C.H. Cáceres and D.M. Rovera: J. Light Met., 2001, vol. 1, pp.151–56.10.1016/S1471-5317(01)00008-6 ↗
16. C.H. Cáceres and A. Blake: Phys. Status Solidi A, 2002, vol. 194, pp. 147-58.10.1002/1521-396X(200211)194:1<147::AID-PSSA147>3.0.CO;2-L ↗
17. A. Blake and C.H. Cáceres: Mater. Sci. Eng. A, 2008, vols. 483-484, pp. 161-63.10.1016/j.msea.2006.10.205 ↗
18. P. Lukáč: Phys. Status Solidi A, 1992, vol. 131, pp. 377-90.10.1002/pssa.2211310212 ↗
19. A.W. Thompson: Metallography, 1972, vol. 28, pp. 366-69.10.1016/0026-0800(72)90018-3 ↗
20. J. Koike and R. Ohyama: Acta Mater., 2005, vol. 53, pp. 1963-72.10.1016/j.actamat.2005.01.008 ↗
21. J. Koike, N. Fujiyama, D. Ando, and Y. Sutou: Scripta Mater., 2010, vol. 63, pp. 747-50.10.1016/j.scriptamat.2010.03.021 ↗
22. Y. Chino, M. Kado, and M. Mabuchi: Acta Mater., 2008, vol. 56, pp. 387-94.10.1016/j.actamat.2007.09.036 ↗
23. A. Couret and D. Caillard: Acta Metall., 1985, vol. 33, pp. 1447-54.10.1016/0001-6160(85)90045-8 ↗
24. H. Yoshinaga and R. Horiuchi: Trans. JIM, 1963, vol. 4, pp. 1-8.10.2320/matertrans1960.4.1 ↗
25. H. Yoshinaga and R. Horiuchi: Trans. JIM, 1963, vol. 5, pp. 14-21.10.2320/matertrans1960.5.14 ↗
26. A. Ahmadieh, J. Mitchell, and J.E. Dorn: Trans. Metall. Soc. AIME, 1965, vol. 233, pp. 1130-38.
27. J.C.M. Li: Can. J. Phys., 1967, vol. 45, pp. 493-509.10.1139/p67-043 ↗
28. V.I. Dotsenko: Phys. Status Solidi B, 1979, vol. 93, pp. 11-43.10.1002/pssb.2220930102 ↗
29. P. Jax, P. Kratochvil, and P. Haasen: Acta Metall., 1970, vol. 18, pp. 237-45.10.1016/0001-6160(70)90029-5 ↗
30. J. Koike, T. Kobayashi, T. Mukai, H. Watanabe, M. Suzuki, M. Maruyama, and K. Higashi: Acta Mater., 2003, vol. 51, pp. 2055-65.10.1016/S1359-6454(03)00005-3 ↗
31. A. Galiyev, O. Sitdikov, and R. Kaibyshev: Mater. Trans., 2003, vol. 44, pp. 426-35.10.2320/matertrans.44.426 ↗
32. T. Obara, H. Yoshinaga, and S. Morozumi: Acta Metall., 1973, vol. 21, pp. 845-53.10.1016/0001-6160(73)90141-7 ↗
33. H. Suzuki: Introduction to the Theory of Dislocations, 4th ed., AGNE, Tokyo, Japan, 1989.
34. M. Kato: Mater. Jpn., 2008, vol. 47, pp. 418-22.10.2320/materia.47.418 ↗
35. R. Labusch: Phys. Status Solidi B, 1970, vol. 41, pp. 659-69.10.1002/pssb.19700410221 ↗
36. M. Kato: Introduction to the Theory of Dislocations, 3rd ed., Shokabo, Tokyo, Japan, 2003.
37. D.H. Sastry, Y.V. Prasad, and K.I. Vasu: Scripta Metall., 1969, vol. 3, pp. 927-29.10.1016/0036-9748(69)90243-9 ↗
38. J.V.D. Planken and A. Deruyttere: Acta Metall., 1969, vol. 17, pp. 451-54.10.1016/0001-6160(69)90026-1 ↗
39. W. Pfeiler: Acta Metall., 1988, vol. 36, pp. 2417-37.10.1016/0001-6160(88)90192-7 ↗
40. C.H. Caceres and A. Blake: Phil. Mag., 2008, vol. 88, pp. 977-89.10.1080/14786430801968611 ↗
41. F.E. Hauser, P.R. Landon, and J.E. Dorn: Trans. AIME, 1956, vol. 206, pp. 589-93.
42. R.W. Armstrong: Acta Metall., 1968, vol. 16, pp. 347-55.10.1016/0001-6160(68)90021-7 ↗
43. R.W. Armstrong, I. Codd, R.M. Douthwaite, and N.J. Petch: Phil. Mag., 1962, vol. 7, pp. 45-58.10.1080/14786436208201857 ↗
44. P. Andersson, C.H. Caceres, and J. Koike: Mater. Sci. Forum, 2003, vols. 419–422, pp. 123-28.10.4028/www.scientific.net/MSF.419-422.123 ↗