journal article·2015-07

Influence of Short Austenitization Treatments on the Mechanical Properties of Low-Alloy Steels for Hot Forming Applications

Martin Joachim Holzweissig, Jan Lackmann, Stefan Konrad, Mirko Schaper, Thomas Niendorf

Publisher page

Abstract

The current work elucidates an improvement of the mechanical properties of tool-quenched low-alloy steel by employing extremely short austenitization durations utilizing a press heating arrangement. Specifically, the influence of different austenitization treatments—involving austenitization durations ranging from three to 15 seconds—on the mechanical properties of low-alloy steel in comparison to an industrial standard furnace process was examined. A thorough set of experiments was conducted to investigate the role of different austenitization durations and temperatures on the resulting mechanical properties such as hardness, bending angle, tensile strength, and strain at fracture. The most important finding is that the hardness, the bending angle as well as the tensile strength increase with shortened austenitization durations. Furthermore, the ductility of the steels exhibits almost no difference following the short austenitization durations and the standard furnace process. The enhancement of the mechanical properties imposed by the short heat treatments investigated, is related to a refinement of microstructural features as compared to the standard furnace process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. H. Karbasian and A.E. Tekkaya: J. Mater. Process. Technol., 2010, vol. 210, pp. 2103-118.10.1016/j.jmatprotec.2010.07.019 ↗
2. M. Maikranz-Valentin, U. Weidig, U. Schoof, H.-H. Becker and K. Steinhoff: Steel Res. Int., 2008, vol. 79, pp. 92-97.10.1002/srin.200806322 ↗
3. T. Lolla, G. Cola, B. Narayanan, B. Alexandrov and S.S. Babu: Mater. Sci. Technol., 2011, vol. 27, pp. 863-875.10.1179/174328409X433813 ↗
4. D.J. Tung, T. Lolla, S.S. Babu and G.M. Cola: Adv. Mater. Process., 2013, vol. 171, pp. 48-50.
5. C.R.F. Azevedo, A.A. Garboggini and A.P. Tschipitschin: Mater. Sci. Technol., 1993, vol. 9, pp. 705-10.10.1179/mst.1993.9.8.705 ↗
6. I. Dlouhy, M. Kouril, and P. Stolar P: 3rd International Europe Heat Treatment and Surface Engineering Conference, 1996, pp. 716–41.
7. G. Cola: Mater. Sci. Technol. Conf. Exh., 2009, vol. 2, pp. 1337-45.
8. G. Frost, M. Niesse, J. Lackmann, S. Konrad, and H.-G. Lambers: Patent DE2014101539, February 02, 2014.
9. E. De Moor, P.J. Gibbs, J.G. Speer, D.K. Matlock and J.G. Schroth: Iron and Steel Technol., 2010, vol. 7, pp. 133-44.
10. M. Umemoto, K. Horiuchi and I. Tamuara: Trans. ISIJ Int., 1982, vol. 22, pp. 854-61.10.2355/isijinternational1966.22.854 ↗
11. A. Matsuzaki and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1999, vol. 15, pp. 518-22.10.1179/026708399101506210 ↗
12. H. Liu, X. Lu, X. Jin, H. Dong and J. Shi: Scripta Mater., 2011, vol. 64, pp. 749-52.10.1016/j.scriptamat.2010.12.037 ↗
13. H.-G. Lambers, S. Tschumak, H.J. Maier and D. Canadinc: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1355-66.10.1007/s11661-009-9827-z ↗
14. G.R. Speich, V.A. Demarest and R.L. Miller: Metall. Trans. A, 1981, vol. 12A, pp. 1419-28.10.1007/BF02643686 ↗
15. H. Azizi-Alizamini, M. Militzer and W.J. Poole: ISIJ Int., 2011, vol. 51, pp. 958-64.10.2355/isijinternational.51.958 ↗
16. R.R. Judd and H.W. Paxton: Trans. Metall. Soc. AIME, 1968, vol. 242, pp. 206-29.
17. S.F. Dirnfeld, B.M. Korevaar and F. Van´t Spijker: Metall. Trans., 1974, vol. 5, pp. 1437-44.10.1007/BF02646630 ↗
18. Y.W. Kim, S.W. Song, S.J. Seo, S.-G. Hong and C.S. Lee: Mater. Sci. Eng. A, 2013, vol. 565, pp. 430-38.10.1016/j.msea.2012.12.055 ↗
19. S.H. Koutzaki, J.E. Krzanowski and J.J. Nainaparampil: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1579-88.10.1007/s11661-002-0168-4 ↗
20. E.O. Hall: Proc. Phys. Soc. B, 1951, vol. 64, pp. 747-53.10.1088/0370-1301/64/9/303 ↗
21. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25-28.
22. R.Z. Valiev, A.V. Korznikov and R.R. Mulyukov: Mater. Sci. Eng. A, 1993, vol. 168, pp. 141-81.10.1016/0921-5093(93)90717-S ↗
23. H.K.D.H Bhadeshia: Mater. Sci. Eng. A, 2008, vol. 481-82, pp. 36-39.10.1016/j.msea.2006.11.181 ↗
24. Y. Tomita and K. Okabayashi: Metall. Trans. A, 1985, vol. 16A, pp. 73-82.10.1007/BF02656714 ↗
25. C.H. Young and H.K.D.H. Bhadeshia: Mater. Sci. Tech., 1994, vol. 10, pp. 209-14.10.1179/mst.1994.10.3.209 ↗