journal article·2013-01Open access

Experimental Analysis of Slip Systems Activation in Neutron-Irradiated Zirconium Alloys and Comparison with Polycrystalline Model Simulations

F. Onimus, J. L. Béchade, D. Gilbon

Abstract

The deformation mechanisms of recrystallized zirconium alloys are strongly influenced by neutron irradiation with significant consequences on the mechanical behavior at the macroscopic scale. It is especially observed, through transmission electron microscopy, that the dislocation channeling process in the basal plane is the main deformation mechanism after irradiation. A polycrystalline modeling which takes into account both the specific post-irradiation deformation mechanisms, and the texture of the material has been developed. This physically based model reproduces the mechanical behavior of the material for both monotonic and cyclic tests. The slip system activities have been computed for several grains observed by TEM. The activation of the basal slip is very well predicted. Moreover, the activation of 〈c+a〉-pyramidal slip observed only in few grains, and the absence of prismatic activation is also well predicted showing the reliability of the modeling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. D.L. Douglass: The Metallurgy of Zirconium. Atomic Energy Review Supplement, p. 41, International Atomic Energy Agency, Vienna, 1971.
2. E. Tenckhoff: Deformation Mechanisms, Texture, and Anisotropy in Zirconium and Zircaloy, ASTM STP 966, American Society for Testing and Materials, West Conshohocken, PA, 1988.
3. F. Ferrer, A. Barbu, T. Bretheau, J. Crépin, F. Willaime, and D. Charquet: Zirconium in Nuclear Industry, 13th International Symposium, ASTM STP 1423, G.D. Moan and P. Rudling, eds., American Society for Testing Materials, West Conshohocken, PA, 2002, p. 863.10.1520/STP11420S ↗
4. R. Brenner, J.L. Béchade, O. Castelnau, and B. Bacroix: J. Nucl. Mater., 2002, vol. 305, p. 175.10.1016/S0022-3115(02)00923-6 ↗
5. D.O. Northwood: Atom. Energy Rev., 1977, vol. 15, pp. 547–610.
6. D.O. Northwood, R.W Gilbert, L.E. Bahen, P.M. Kelly, R.G. Blake, A. Jostsons, P.K. Madden, D. Faulkner, W. Bell, and R.B. Adamson: J. Nucl. Mater., 1979, vol. 79, pp. 379–94.10.1016/0022-3115(79)90103-X ↗
7. M. Griffiths: J. Nucl. Mater., 1988, vol. 159, pp. 190–218.10.1016/0022-3115(88)90093-1 ↗
8. F. Onimus and J.L. Béchade: Comprehensive Nuclear Materials, R. Konings ed., vol. 4, pp. 1–31, Elsevier Ltd., Oxford, 2012.10.1016/B978-0-08-056033-5.00064-1 ↗
9. F. Onimus, I. Monnet, J.L. Béchade, C., Prioul, and P., Pilvin: J. Nucl. Mater., 2004, vol. 328, pp. 165–79.10.1016/j.jnucmat.2004.04.337 ↗
10. F. Onimus, L. Dupuy, and F. Mompiou: Prog. Nucl. Energy, 2012, vol. 57, pp. 77–85.10.1016/j.pnucene.2011.10.005 ↗
11. M.S. Wechsler: The Inhomogeneity of Plastic Deformation, pp. 19–52, ASM, Metals Park, OH, 1973.
12. A. Luft: Prog. Mater. Sci., 1991, vol. 35 pp. 97–204.10.1016/0079-6425(91)90002-B ↗
13. C.E. Coleman, D. Mills, and J. van der Kuur: Can. Metall. Q., 1972, vol. 11, pp. 91–100.10.1179/000844372795257755 ↗
14. C.D. Williams, R.B. Adamson, and K.D. Olhausen: European Conference on Irradiation Behavior of Fuel Cladding and Core Component Materials, Gesellschaft für Kernforschung mbH., Karlsruhe, Germany, 1974, pp. 189–92.
15. T. Onchi, H. Kayano, and Y. Higashiguchi: J. Nucl. Mater., 1980, vol. 88, pp. 226–35.10.1016/0022-3115(80)90278-0 ↗
16. K. Pettersson: J. Nucl. Mater., 1982, vol. 105, pp. 341–44.10.1016/0022-3115(82)90394-4 ↗
17. R.B. Adamson and W.L. Bell: Microstructure and Mechanical Behavior of Materials, Proceedings, International Symposiums, vol. 1, pp. 237–246, EMAS, Warley, U.K., Xian, China, 1986.
18. M. Fregonese, C. Régnard, L. Rouillon, T. Magnin, F. Lefebvre, and C. Lemaignan: Zirconium in Nuclear Industry: Twelfth International Symposium, ASTM STP 1354, G.P. Sabol and G.D. Moan, eds., American Society for Testing Materials, West Conshohocken, PA, 2000, pp. 377–98.10.1520/STP14309S ↗
19. C. Régnard, B. Verhaeghe, F. Lefebvre-Joud, and C. Lemaignan, Zirconium in the Nuclear Industry, 13th International Symposium, ASTM STP 1423, G.D. Moan and P. Rudling, eds., American Society for Testing Materials, West Conshohocken, PA, 2002, pp. 384–99.10.1520/STP11398S ↗
20. F. Onimus, J.L. Béchade, C. Prioul, P. Pilvin, I. Monnet, S. Doriot, B. Verhaeghe, D. Gilbon, L. Robert, L. Legras, and J.-P. Mardon: J. ASTM Int., 2005, vol. 2, pp. 53–76.10.1520/JAI12424 ↗
21. F. Onimus and J.L. Béchade: J. Nucl. Mater., 2009, vol. 384, pp. 163–74.10.1016/j.jnucmat.2008.11.006 ↗
22. D. Gilbon, A. Soniak, S. Doriot, and J.-P. Mardon: Zirconium in Nuclear Industry: Twelfth International Symposium, ASTM STP 1354, G.P. Sabol and G.D. Moan, eds., American Society for Testing Materials, West Conshohocken, PA, 2000, p. 51.10.1520/STP14294S ↗
23. S. Doriot, D. Gilbon, J.L. Béchade, M.H. Mathon, L. Legras, and J.P. Mardon: J. ASTM Int., 2005, vol. 2, pp. 175–201.10.1520/JAI12332 ↗
24. T. Nogaret, C. Robertson, and D. Rodney: Philos. Mag., 2007, vol. 87, p. 945.10.1080/14786430601011497 ↗
25. T. Nogaret, D. Rodney, M. Fivel, and C. Robertson: J. Nucl. Mater., 2008, vol. 380, pp. 22–29.10.1016/j.jnucmat.2008.07.001 ↗
26. T.S. Byun and N. Hashimoto: J. Nucl. Mater., 2006, vol. 354, p. 123.10.1016/j.jnucmat.2006.02.099 ↗
27. M. Berveiller and A. Zaoui: J. Mech. Phys. Solids, 1979, vol. 26, p. 325.10.1016/0022-5096(78)90003-0 ↗
28. U.F. Kocks, C.N. Tomé, and H.-R. Wenk: Texture and Anisotropy, Preferred Orientations in Polycrystals and Their Effect on Materials Properties, 1st ed., Cambridge University Press, Cambridge, 1998.
29. F. Barbe, L. Decker, D. Jeulin, and G. Cailletaud: Int. J. Plast., 2001, vol. 17, p. 513.10.1016/S0749-6419(00)00061-9 ↗
30. R. Brenner, R. Masson, O. Castelnau, and A. Zaoui: Eur. J. Mech. A/Solids, 2002, vol. 21, p. 943.10.1016/S0997-7538(02)01247-0 ↗
31. G. Cailletaud: Int. J. Plast., 1992, vol. 8, p. 55.10.1016/0749-6419(92)90038-E ↗
32. P. Pilvin: Proceedings of the International Conference on Biaxial/Multiaxial Fatigue, pp. 31–46, ESIS/SF2M, Saint-Germain en Laye, 1994.
33. X. Feaugas, P. Pilvin, and M. Clavel: Acta Mater., 1997, vol. 45, pp. 2703–14.10.1016/S1359-6454(96)00407-7 ↗
34. M. Priser, M. Rautenberg, J.M. Cloué, P. Pilvin, X. Feaugas, and D. Poquillon, 2011, J. ASTM Int., vol. 8, pp. 10–19.10.1520/JAI103015 ↗
35. G.S. Was: Fundamentals of Radiation Materials Science, p. 594, Springer, Berlin, 2007.
36. D. Rodney, G. Martin, and Y. Bréchet: Mater. Sci. Eng. A, 2001, vol. 309–10, p. 198.10.1016/S0921-5093(00)01723-8 ↗
37. C. Pokor, X. Averty, Y. Bréchet, P. Dubuisson, and J.P. Massoud: Scripta Mater., 2004, vol. 50, p. 597.10.1016/j.scriptamat.2003.11.029 ↗
38. L. Meric, P. Poubanne, and G. Cailletaud: J. Eng. Mater. Technol. (Trans. ASME), 1991, vol. 113, p. 162.10.1115/1.2903374 ↗
39. Y. Jiang and P. Kurath: Int. J. Plast., 1996, vol. 12, p. 387.10.1016/S0749-6419(96)00013-7 ↗
40. S.B. Wisner, M.B. Reynolds, and R.B. Adamson: Zirconium in the Nuclear Industry: 10th International Symposium, ASTM STP 1245, A.M. Garde and E.R. Bradley, eds., American Society for Testing Materials, West Conshohocken, PA, 1994, p. 499.10.1520/STP15206S ↗
41. R. A. Lebensohn, C. N. Tomé, and P. Ponte Castañeda: Philos. Mag., 2007, vol. 87, pp. 4287–4322.10.1080/14786430701432619 ↗
42. C. Mareau and M.R. Daymond: Acta Mater., 2010, vol. 58, pp. 3313–25.10.1016/j.actamat.2010.02.005 ↗
43. N. Letouzé, R. Brenner, O. Castelnau, J.L. Béchade, M.H. Mathon: Scripta Mater., 2002, vol. 47, p. 595.10.1016/S1359-6462(02)00199-9 ↗
44. F. Xu, R.A. Holt, and M.R. Daymond: J. Nucl. Mater., 2008, vol. 373, pp. 217–25.10.1016/j.jnucmat.2007.05.052 ↗