journal article·2008-06

Evaluation of the Proportion of Phases and Mechanical Strength of Two-Phase Steels Using Barkhausen Noise Measurements: Application to Commercial Dual-Phase Steel

X. Kleber, A. Hug-Amalric, J. Merlin

Publisher page

Abstract

The possibility to assess the relative proportion of phases and the mechanical strength in two-phase steels by means of Barkhausen noise measurements has been studied. It was found that the amplitudes of the Barkhausen peaks are directly proportional to the relative proportion of the corresponding phases. We have shown that the peak amplitude can be used to assess not only phase proportion but also its magnetic field position. These conclusions were drawn for ferrite-martensite steels with different proportions and compositions and also for spheroidal graphite cast iron composed of ferrite-martensite and ferrite-bainite phases. We also applied these results to different grades of commercial dual-phase (DP) steels, thereby confirming the possibility to assess phase proportion and mechanical strength using this nondestructive magnetic technique.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. D.T. Llewelyn, D.J. Hillis: Ironmaking and Steelmaking, 1996, vol. 23, pp. 471–78
2. G. Thomas and J.Y. Koo: in Structure and Properties of Dual Phase Steels, R.A Kot and J.W. Morris, eds., The Metal Society AIME, New York, 1979.
3. N.J. Kim and G. Thomas: Metall. Mater. Trans. A, 1981, vol. 12A, pp. 483–8910.1007/BF02648546 ↗
4. R. Filippone, J. Root, P. Jacques, S. Yue: ISIJ Int., 2001, vol. 42, pp. 304–0910.2355/isijinternational.42.304 ↗
5. S. Tiitto: Acta Polytechnica Scandinavica, Applied Physics Series, 1977, p. 80
6. S. Chikazumi: Phys. Ferromagn., 1997
7. L. Neel: Extrait des cahiers de Physique, 1944, vol. 25, pp. 21–44
8. C. Gatelier Rothea, J. Chicois, R. Fougeres, P. Fleischamann: Acta Mater., 1998, vol. 46, pp. 4873–8210.1016/S1359-6454(98)00205-5 ↗
9. D.J. Buttle, J.P. Jakubovics, G.A.D. Briggs: Philos. Mag. A, 1987, vol. 55, pp. 735–5610.1080/01418618708214380 ↗
10. H. Sakamoto, M. Okada, M. Homma: IEEE Trans. Magn., 1987, vol. 23, pp. 2236–3810.1109/TMAG.1987.1065664 ↗
11. D.J. Buttle, C.B. Scruby, J.P. Jakubovics, G.A.D. Briggs: Philos. Mag. A, 1986, vol. 55, pp. 717–3410.1080/01418618708214379 ↗
12. X. Kleber, A. Vincent: NDT&E Int., 2004, vol. 37, pp. 439–4510.1016/j.ndteint.2003.11.008 ↗
13. M.G. Hetherington, J.P. Jakubovics, J.A. Szpunar, B.K. Tanner: Philos. Mag. B, 1987, vol. 56, pp. 561–7710.1080/13642818708220163 ↗
14. D.J. Buttle, C.B. Scruby, G.A.D. Briggs, J.P. Jakubovics: Proc. R. Soc. London A, 1987, vol. 414, pp. 469–9710.1098/rspa.1987.0155 ↗
15. S. Tiitto: Acta Polytechnica Scandinavia, 1977, 119
16. A. Vincent, L. Pasco, M. Morin, X. Kleber, M. Delnondedieu: Acta Mater., 2005, vol. 53, pp. 4579–9110.1016/j.actamat.2005.06.016 ↗
17. V. Moorthy, B.A. Shaw, P. Hopkins: NDT&E Int., 2005, vol. 38, pp. 159–6610.1016/j.ndteint.2004.07.006 ↗
18. V. Moorthy, B.A. Shaw, P. Mountford, P. Hopkins: Acta Mater., 2005, vol. 53, pp. 4997–500610.1016/j.actamat.2005.06.029 ↗
19. X. Kleber, A. Hug, J. Merlin, M. Soler: ISIJ Int., 2004, vol. 44, pp. 1033–3910.2355/isijinternational.44.1033 ↗
20. M. Lindgren, T. Lepisto: NDT&E Int., 2004, vol. 37, pp. 403–1010.1016/j.ndteint.2003.11.005 ↗
21. K.L. Wang, S.E. Hsu: J. Magn. Magn. Mater., 1982, vol. 30, pp. 37–4910.1016/0304-8853(82)90007-5 ↗
22. V.V. Bakaev, A.A. Snarskii, M.V. Shamonin: Tech. Phys., 2001, vol. 46, pp. 1571–7410.1134/1.1427995 ↗
23. Y. Choi, W.Y. Choo, D. Kwon: Scripta Mater., 2001, vol. 45, pp. 1401–0610.1016/S1359-6462(01)01176-9 ↗