The Evolution of As-cast Microstructure of Ternary Mg-Al-Zn Alloys: An Experimental and Modeling Study
Source abstract
Abstract
A numerical formulation of solidification model which can predict the microsegregation and microstructural features for multicomponent alloys is presented. The model incorporates the kinetic features during solidification such as solute back diffusion, dendrite tip undercooling, and secondary arm coarsening. The model is dynamically linked to thermodynamic library for accurate input of thermodynamic data. The modeling results are tested against the directional solidification experiments for Mg-Al-Zn alloys. The experiments were conducted in the cooling rate range of 0.13 to 2.33 K/s and microstructural features such as secondary arm spacing, primary dendrite arm spacing, second phase fraction, and microsegregation were compared with the modeling results. Based on the model and the experimental data, a solidification map was built in order to provide guidelines for as-cast microstructural features of Mg-Al-Zn alloys in a wide range of solidification conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Magnesium Alloys: Properties and Applications · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. M.O. Pekguleryuz and A.A. Kaya: Proceedings 6th International Conference on Magnesium Alloys and their Applications, 2004, pp. 74–93.10.1002/3527603565.ch12 ↗
2. I.-H. Jung, W. Bang, I.J. Kim, H.I. Sung, W.J. Park, D. Choo, S. Ahn, R.S. Beals: Magnesium Technology, 2007, TMS, Orlando, FL, pp. 85–88.
3. Y. Nakaura and K. Ohori: Mater. Sci. Forum., 2005, pp. 419–26.10.4028/0-87849-968-7.419 ↗
4. Y. Nakaura, A. Watanabe and K. Ohori: Mater. Trans., 2006, vol. 47(7), pp. 1743–49.10.2320/matertrans.47.1743 ↗
5. S.S. Park, D.H. Kang, G.T. Bae and N.J. Kim: Mater. Sci. Forum, 2005, vol. 488–89, pp. 431–34.10.4028/www.scientific.net/MSF.488-489.431 ↗
6. M. Masoumi, F. Zarandi and M. Pekguleryuz: Scripta Mater., 2010, vol. 62 pp. 823–26.10.1016/j.scriptamat.2010.02.003 ↗
7. M. Paliwal and I.-H Jung: Acta Mater., 2013, vol. 61(13), pp. 4848–60.10.1016/j.actamat.2013.04.063 ↗
8. M. Paliwal, D.H. Kang, E. Essadiqi, and I.-H Jung: Metall. Mater. Trans. A, 2014, DOI:10.1007/s11661-014-2265-610.1007/s11661-014-2265-6 ↗
9. S. Petersen and K. Hack: Int. J. Mater. Res., 2007, vol. 98, pp. 935–45.10.3139/146.101551 ↗
10. C.W. Bale, E. Bélisle, P. Chartrand, S.A. Decterov, G. Eriksson, K. Hack, I.-H. Jung, Y-B. Kang, J. Melançon, A.D. Pelton, C. Robelin and S. Petersen: CALPHAD, 2009, vol. 31, pp. 295–311.10.1016/j.calphad.2008.09.009 ↗
11. J. Lacaze and G. Lesoult: Mater. Sci. Eng., 1993, vol. A173, pp. 119–22.10.1016/0921-5093(93)90199-O ↗
12. X. Yan, F. Yie, M. Chu and Y.A. Chang: Mater. Sci. Eng., 2001, vol. A302, pp. 268–74.10.1016/S0921-5093(00)01825-6 ↗
13. C. Zhang, D. Ma, K.-S. Wu, H.-B. Cao, S. Kou, Y.A. Chang and X.-Y. Yan: Intermetallics, 2007, vol. 15(10), pp. 1395–1400.10.1016/j.intermet.2007.01.009 ↗
14. D. Mirković and R. Schmid-Fetzer: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 974–81.10.1007/s11661-009-9788-2 ↗
15. M. Paliwal and I.-H Jung: J. Cryst. Growth, 2014, vol. 394, pp. 28–38.10.1016/j.jcrysgro.2014.02.010 ↗
16. W. Kurz, B. Giovanola and R. Trivedi: Act. Metall., 1986, vol. 34, pp. 823–30.10.1016/0001-6160(86)90056-8 ↗
17. M. Rappaz, S.A. David, J.M. Vitek and L.A. Boatner: Metall. Mater. Trans. A, 1990, vol. 21A, pp. 1767–82.10.1007/BF02672593 ↗
18. T.F. Bower, H.D. Brody and M.C. Flemings: Trans. AIME, 1996, vol. 236, pp. 624–34.
19. W. Kurz and D.J. Fisher: Fundamentals of Solidification, 3rd ed. Trans. Tech. Publications, Aedermannsdorf, Switzerland, 1992.
20. A. Roosz, E. Halder and H.E. Exner: Mater. Sci. Tech., 1986, vol. 2, pp. 1149–55.10.1179/mst.1986.2.11.1149 ↗
21. A. Roosz, E. Halder and H.E. Exner, Acta Metall., 1990, vol. 38, pp. 375–80.10.1016/0956-7151(90)90068-R ↗
22. R.C. Beaverstock: Solidification Processing, 1997, pp. 321–26.
23. V.R. Voller: Int. J. Heat Mass Transfer, 2000, vol. 197, pp. 2047–52.10.1016/S0017-9310(99)00268-9 ↗
24. T.F. Bower, H.D. Brody and M.C. Flemings: Trans. AIME, 1996, vol. 236, pp. 615–24.
25. E. Scheil: Z. Metallk., 1942, vol. 34, pp. 70–72.
26. S.K. Das, Y.-M. Kim, T.K. Ha, R. Gauvin, and I.-H Jung: Metall. Mater. Trans. A, 2013, vol. 43A, pp. 2539–47.10.1007/s11661-013-1636-8 ↗
27. S.K. Das, Y.-M. Kim, T.K. Ha and I.-H Jung: CALPHAD, 2013, vol. 42, pp. 51–58.10.1016/j.calphad.2013.07.002 ↗
28. A. Einstein: Ann. Phys., 1905, vol. 17, pp. 549–60.10.1002/andp.19053220806 ↗
29. M.F. Culpin: Proc. Phys. Soc., 1957, vol. 70, pp. 1079–86.10.1088/0370-1301/70/11/308 ↗
30. S. Wang, D. Liu, Y. Du, L. Zhang, Q. Chen and A. Engström, Int. J. Mater. Res., 2013, vol. 104, pp. 721–35.10.3139/146.110923 ↗
31. M. Masoumi and M. Pekguleryuz: AFS Trans., vol. 117, 2009, pp. 617–26.
32. Y. He, A. Javaid, E. Essadiqi and M. Shehata: Can. Metall. Q., 2009, vol. 48(2), pp. 145–55.10.1179/cmq.2009.48.2.145 ↗
33. COMSOL 3.3: Heat Transfer user’ guide, COMSOL-AB.
34. K. Pettersen, O. Lohne, and N. Ryum: Metall. Trans. A. A, 1990, vol. 21A, pp. 221–30.10.1007/BF02656439 ↗
35. H.M. Tensi and R. Rösch: Magnesium Alloys and Their Applications, DGM, Oberursel, Germany, 1992, pp. 283–89.
36. C. Labrecque, R. Angers, R. Tremblay and D. Dubé: Can. Metall. Q., 1997, vol. 36, pp. 169–75.10.1179/cmq.1997.36.3.169 ↗
37. D. Dubé, A. Couture, Y. Carbonneau, M. Fiset, R. Angers and R. Tremblay: Int. J. Cast Metals Res., 1998, vol. 11, pp. 139–44.10.1080/13640461.1998.11819268 ↗
38. H. Sasaki, M. Adachi, T. Sakamoto, and A. Takimoto: Proceedings 53rd Annual World Magnesium Conference, McLean, VA, 1996, pp. 86–92.
39. J.S. Kim, M. Isac and R.I.L. Guthrie: Mg Technology, 2004 TMS, Charlotte, NC, pp. 247–55.
40. W.P. Sequeira, M.T. Murray, G.L. Dunlop, and D.H. StJohn: Proceedings TMS Symposium on Automotive Alloys, Warrendale PA, 1997, pp. 169–83.
41. C.H. Caceres, C.J. Davidson, J.R. Griffiths and C.L. Newton: Mater. Sci. Eng. A, 2002, vol. 35A, pp. 344–55.10.1016/S0921-5093(01)01467-8 ↗
42. W. Kurz and D.J. Fisher: Acta Metall., 1980, vol. 29, pp. 11–20.10.1016/0001-6160(81)90082-1 ↗
43. R. Trivedi: Metall. Trans. 1984; vol.15, pp. 977–82.10.1007/BF02644689 ↗
44. J.D. Hunt: International Conference on Solidification and Casting of Metals, The Metals Society, London, 1979, pp. 3–9.
45. J.S. Langer and H. Muller-Krumbhaar: J. Cryst. Growth, 1977, vol. 42, pp. 11–4.10.1016/0022-0248(77)90171-3 ↗
46. W.W. Mullins and R.F. Sekerka: J. Appl. Phys., 1964, vol. 35, pp. 444–52.10.1063/1.1713333 ↗
47. J.D. Hunt: Mater. Sci. Eng., 1984, vol. 65, pp.75–82.10.1016/0025-5416(84)90201-5 ↗
48. A. Hadadzadeh: Ph.D. Thesis, University of Waterloo, 2013.