journal article·2006-03

Theoretical and practical implications of creep curve shape analyses for 7010 and 7075

H. Burt, B. Wilshire

Publisher page

Abstract

Over tensile stress ranges giving creep lives up to 2000 hours at 373 to 463 K, the creep and creep fracture properties of 7010 are compared with results recorded for 7075 and other precipitation-hardened aluminum alloys. Using the ϑ methodology to quantify the systematic variations in creep curve shape with changing test conditions, the behavior patterns displayed by the different alloys are shown to depend on the extent to which precipitate coarsening causes a progressive loss of creep strength with increasing test duration and temperature. The ϑ relationships also introduce new approaches for rationalization and interpretation of creep data sets, based on the activation energy for lattice diffusion in the alloy matrices and the yield stress or UTS at the creep temperatures.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. C.R. Barrett, A.J. Ardell, and O.D. Sherby: Trans. AIME, 1964, vol. 230, pp. 200–04.
2. Creep Behavior of Advanced Materials for the 21st Century, R.S. Mishra, A.K. Mukherjee, and K.L. Murty, eds., TMS, Warrendale, PA, 1999, pp. 391–507.
3. E. Arzt: Res. Mech., 1991, vol. 31, pp. 399–453.
4. F.C. Monkman and N.J. Grant: Proc. ASTM, 1956, vol. 56, pp. 593–605.
5. J.G. Kaufman: Properties of Aluminum Alloys, ASM, Metals Park, OH, 1999.
6. F.R. Larson and J. Miller: Trans. ASME, 1952, vol. 74, pp. 765–75.
7. R.L. Orr, O.D. Sherby, and J.E. Dorn: Trans. ASM, 1954, vol. 46, pp. 113–28.
8. R.W. Evans and B. Wilshire: Creep of Metals and Alloys, The Institute of Metals, London, 1985.
9. R.W. Evans and B. Wilshire: Introduction to Creep, The Institute of Materials, London, 1993.
10. H. Burt and B. Wilshire: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1691–701.10.1007/s11661-004-0078-8 ↗
11. H. Burt and B. Wilshire: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1219–27.10.1007/s11661-005-0214-0 ↗
12. V. Srivastava, J.P. Williams, K.R. McNee, G.N. Greenwood, and H. Jones: Mater. Sci. Eng., A, 2004, vol. A382, pp. 50–56.10.1016/j.msea.2004.04.047 ↗
13. J.D. Embury, B.A. Wilcox, and A.H. Clauer: J. Inst. Met., 1972, vol. 100, pp. 153–62.
14. B. Wilshire and H. Burt: Z. Metallkd., 2005, vol. 96, pp. 552–57.10.3139/146.101069 ↗
15. B. Wilshire and H. Burt: Mater. Sci. Forum, 2002, vols. 396–402, pp. 1309–14.10.4028/www.scientific.net/MSF.396-402.1309 ↗
16. R.C. Rice, J.L. Jackson, J. Bakuckas, and S. Thompson: Metallic Materials Properties Development and Standardization, NTIS, Springfield, VA, 2003.
17. B. Wilshire: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 241–48.10.1007/s11661-002-0086-5 ↗
18. F.A. Leckie and D.R. Hayhurst: Acta Metall., 1977, vol. 25, pp. 1059–70.10.1016/0001-6160(77)90135-3 ↗
19. M.R. Ashby and B.F. Dyson: in Advances in Fracture Research, S.R. Valluri, ed., Pergamon Press, Oxford, United Kingdom, 1984, vol. 1, pp. 3–30.
20. L.M. Kachanov: Izv. Akad. Nauk, USSR, Otd. TeKd. Nauk, 1958, vol. 8, pp. 26–38.
21. B. Wilshire and H. Burt: Scripta Mater., 2005, vol. 53, pp. 909–14.10.1016/j.scriptamat.2005.06.031 ↗
22. J.G. Park, D.Y. Lee, and J. Choi: J. Mater. Sci., 1996, vol. 31, pp. 2719–23.10.1007/BF00687306 ↗
23. C.N. Ahlquist and W.D. Nix: Acta Metall., 1971, vol. 19, pp. 373–85.10.1016/0001-6160(71)90105-2 ↗
24. B. Wilshire and M. Willis: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 563–71.10.1007/s11661-004-0367-2 ↗
25. aluSELECT database: http://aluminium.matter.org.uk/aluselect.
26. J.C. Williams and E.A. Starke, Jr.: Acta Mater., 2003, vol. 51, pp. 5775–99.10.1016/j.actamat.2003.08.023 ↗
27. C. Zener and J.H. Hollomon: Trans. ASM, 1944, vol. 33, pp. 163–69.