journal article·2006-05

Contributions to the interfacial adhesion in co-sintered bilayers

Y. Boonyongmaneerat, C. A. Schuh

Publisher page

Abstract

The adhesive strength of co-sintered bilayers is influenced by several factors, including the nature of bonding along the joined interface, residual stresses evolved during processing, and the sintered properties of the individual layers. Here these separate contributions are isolated through careful control of the co-sintering process for W/Al2O3 bilayers, and in particular through control of the W-layer properties by using the process of activated sintering. Four-point bending delamination tests are used to evaluate adhesion and strength of the bilayers, and the interfacial fracture mechanics of the system is numerically studied using finite element simulations. Improvements in sintered density are found to increase the adhesive strength of the system only up to a point, beyond which shrinkage mismatch compromises the intrinsic toughness of the interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. R.F. Bunshah: J. Vac. Sci. Technol. B, 1984, vol. 2, pp. 789–99.10.1116/1.582880 ↗
2. M.J. Pomeroy: Mater. Des., 2005, vol. 26, pp. 223–31.10.1016/j.matdes.2004.02.005 ↗
3. L.G. Vettraino and S.H. Risbud: IEEE Trans. Compon. Packag. Technol., 1999, vol. 22, pp. 270–81.10.1109/6144.774744 ↗
4. A.J. Blodgett: Sci. Am., 1983, vol. 249, pp. 86–96.10.1038/scientificamerican0783-86 ↗
5. D.L. Wilcox, F.H. Rong, and D. Anderson: Proc. Int. Symp. Microelectron., 1997, vol. 3235, pp. 17–23.
6. L.A. Xue, T.L. Cable, and E.A. Barringer: Ceram. Eng. Sci. Proc., 2003, vol. 24, pp. 281–86.10.1002/9780470294802.ch42 ↗
7. T. Cheng and R. Raj: J. Am. Ceram. Soc., 1989, vol. 72, pp. 1649–55.10.1111/j.1151-2916.1989.tb06297.x ↗
8. K. Otsuka, T. Usami, and M. Sekihata: Am. Ceram. Soc. Bull., 1981, vol. 60, pp. 540–45.
9. K. Biswas and G.S. Upadhyaya: Mater. Des., 1998, vol. 19, pp. 231–40.10.1016/S0261-3069(98)00030-2 ↗
10. J.R. Floyd: Am. Ceram. Soc. Bull., 1963, vol. 42, pp. 65–70.
11. B.C. Foster, F.J. Bachner, E.S. Tormey, M.A. Occhionero, and P.A. White: IEEE Trans. Components Hybrids Manuf. Technol., 1991, vol. 14, pp. 784–89.10.1109/33.105134 ↗
12. D.A. Chance: Metall. Trans., 1970, vol. 1, pp. 685–94.10.1007/BF02811596 ↗
13. S.J. Howard, R.A. Stewart, and W.J. Clegg: Key Eng. Mater., 1996, vol. 116–117, pp. 331–350.10.4028/www.scientific.net/KEM.116-117.331 ↗
14. T.W. Clyne and S.C. Gill: J. Therm. Spray Technol., 1996, vol. 5, pp. 401–18.10.1007/BF02645271 ↗
15. H. Tomaszewski, J. Strzeszewski, and W. Gebicki: J. Eur. Ceram. Soc., 1999, vol. 19, pp. 255–62.10.1016/S0955-2219(98)00189-7 ↗
16. X. Wang and P. Xiao: Acta Mater., 2004, vol. 52, pp. 2591–603.10.1016/j.actamat.2004.02.007 ↗
17. P.Z. Cai, D.J. Green, and G.L. Messing: J. Am. Ceram. Soc., 1997, vol. 80, pp. 1929–39.10.1111/j.1151-2916.1997.tb03075.x ↗
18. R.R. Tummala: Am. Ceram. Soc. Bull., 1988, vol. 67, pp. 752–58.
19. W.H. Kohl: Vacuum, 1964, vol. 14, pp. 333–54.10.1016/0042-207X(64)90129-0 ↗
20. P.F. Varadi and R. Dominguez: Am. Ceram. Soc. Bull., 1966, vol. 45, pp. 789–91.
21. P.S. Kislyi, B.D. Storozh, and M.L. Gorb: Sov. Powder Metall. Met. Ceram., 1977, vol. 16, pp. 299–302.10.1007/BF00806135 ↗
22. R.M. German and Z.A. Munir: Metall. Trans. A, 1976, vol. 7A, pp. 1873–77.10.1007/BF02654983 ↗
23. N.M. Hwang, Y.J. Park, D.Y. Kim, and D.Y. Yoon: Scripta Mater., 2000, vol. 42, pp. 421–25.10.1016/S1359-6462(99)00344-9 ↗
24. I.H. Moon, J.Y. Kim, and Y.D. Kim: Int. J. Refract. Met. Hard Mater., 1984, vol. 3, pp. 176–79.
25. P.G. Charalambides, J. Lund, A.G. Evans, and R.M. McMeeking: J. Appl. Mech., 1989, vol. 56, pp. 77–82.10.1115/1.3176069 ↗
26. A. Cazzato and K.T. Faber: J. Am. Ceram. Soc., 1997, vol. 80, pp. 181–88.10.1111/j.1151-2916.1997.tb02808.x ↗
27. P. Lucksanasombool, W.A.J. Higgs, R.J.E.D. Higgs, and M.V. Swain: Biomaterials, 2003, vol. 24, pp. 1159–66.10.1016/S0142-9612(02)00464-7 ↗
28. J. Malzbender, R.W. Steinbrech, and L. Singheiser: J. Mater. Res., 2003, vol. 18, pp. 929–34.10.1557/JMR.2003.0127 ↗
29. A.J. Phillipps, W.J. Clegg, and T.W. Clyne: Acta Metall. Mater., 1993, vol. 41, pp. 819–27.10.1016/0956-7151(93)90015-K ↗
30. Z. Suo and J.W. Hutchinson: Mater. Sci. Eng., 1989, vol. A107, pp. 135–43.10.1016/0921-5093(89)90382-1 ↗
31. L.L. Seigle and C.D. Dickinson: Refractory Metals and Alloys. 1963, Interscience Publishers, New York, NY, vol. 17, pp. 65–117.
32. S.H. Crandall, N.C. Dahl, and T.J. Lardner: An introduction to the Mechanics of Solids. 1999, McGraw-Hill: New York, NY, pp. 416–510.
33. C.J. Li and R.M. German: Metall. Trans. A, 1983, vol. 14A, pp. 2031–41.
34. Y.H. Kim, S.H. Cho, J.K. Lee, and I.H. Moon: Int. J. Refract. Met. Hard Mater., 1988, vol. 7, pp. 206–09.
35. J.F. Shackelford and W. Alexander: CRC Materials Science and Engineering Handbook, 3rd ed. 2001, CRC Press, Boca Raton, FL, p. 462.
36. W.B. Eisen: ASM Handbook: Powder Metal Technologies and Applications. 1998, ASM, Materials Park, OH, p. 907.
37. G.T. Murray: Handbook of Materials Selection for Engineering Applications. 1997, Marcel Dekker, Inc., New York, NY, p. 263.10.1201/9781482292237 ↗
38. D.N. Boccaccini and A.R. Boccaccini: J. Nondestr. Eval., 1997, vol. 16, pp. 187–92.10.1023/A:1021891813782 ↗
39. L.J. Gibson and M.F. Ashby: Cellular Solids: Structure & Properties. 1988, Pergamon Press: Elmsford, NY, p. 207.
40. J.R. Rice: J. Appl. Mech., 1988, vol. 55, pp. 98–103.10.1115/1.3173668 ↗
41. P.P.L. Matos, R.M. McMeeking, P.G. Charalambides, and M.D. Drory: Int. J. Fract., 1989, vol. 40, pp. 235–54.10.1007/BF00963659 ↗
42. P.G. Charalambides, H.C. Cao, J. Lund, and A.G. Evans: Mech. Mater., 1990, vol. 8, pp. 269–83.10.1016/0167-6636(90)90047-J ↗
43. S. Roham, K. Hardikar, and P. Woytowitz: J. Mater. Res., 2004, vol. 19, pp. 3019–27.10.1557/JMR.2004.0376 ↗