journal article·2015-12

Flow Behavior and Processing Maps of a Low-Carbon Steel During Hot Deformation

Xiawei Yang, Wenya Li

Publisher page

Abstract

The hot isothermal compression tests of a low-carbon steel containing 0.20 pct C were performed in the temperature range of 973 K to 1273 K (700 °C to 1000 °C) and at the strain rate range of 0.001 to 1 s−1. The results show that the flow stress is dependent on deformation temperature and strain rate (decreasing with increasing temperature and/or increasing with increasing strain rate). The flow stress predicted by Arrhenius-type and artificial neural network models were both in a good agreement with experimental data, while the prediction accuracy of the latter is better than the former. A processing map can be obtained by superimposing an instability map on a power dissipation map. Finally, an FEM model was successfully established to simulate the compression test process of this steel. The processing map combined with the FEM model can be very beneficial to solve the problems of residual stress, distortion, and flow instability of components.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. M. J. Hsieh, Y. C. Chiou and R. T. Lee: J. Mater. Process. Technol., 2015, vol. 224, pp. 149-155.10.1016/j.jmatprotec.2015.04.033 ↗
2. X.F. Shi, L. Gao, H. Khalatbari, Y. Xu, H. Wang and L.L. Jin: Int. J. Adv. Manuf. Technol., 2013, vol. 68, pp. 241-247.10.1007/s00170-013-4724-4 ↗
3. M. S. Dastgiri, J. Mohammadi, Y. Behnamian, A. Eghlimi and A. Mostafaei: Eng. Fail. Anal., 2015, vol. 53, pp. 78-96.10.1016/j.engfailanal.2015.03.015 ↗
4. D. G. He, Y.C. Lin, M. S. Chen, J. Chen, D. X. Wen and X. M. Chen: J. Alloy. Compd., 2015, vol. 649, pp. 1075-1084.10.1016/j.jallcom.2015.07.213 ↗
5. Y. C. Huang, Y. C. Lin, J. Deng, G. Liu and M. S. Chen: Mater. Des., 2014, vol. 53, pp. 349-356.10.1016/j.matdes.2013.06.070 ↗
6. X.W. Yang, Z.H. Lai, J.C. Zhu, Y. Liu and D. He, Mater. Sci. Eng. B, 2012, vol. 177, pp. 1721-1725.10.1016/j.mseb.2012.02.020 ↗
7. S.M. Abbasi, M. Morakkabati, A. H. Sheikhali and A. Momeni: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5201-5211.10.1007/s11661-014-2464-1 ↗
8. I. Ghamarian, P. Samimi, V. Dlxit, and P. C. Collins: Metall. Mater. Trans. A, 2015. doi:10.1007/s11661-015-3072-4.10.1007/s11661-015-3072-4 ↗
9. H. Mirzadeh, J. M. Cabrera and A. Najafizadeh: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 108-12310.1007/s11661-011-0836-3 ↗
10. X.W. Yang, J.C. Zhu, Z.H. Lai, Y.R. Kong, R.D. Zhao and D. He: Mater. Sci. Tech., 2012, vol. 28, pp. 151-155.10.1179/1743284710Y.0000000051 ↗
11. M. Suresh Kumar, M. Ambresha, K. Venkateswarlu and V. R. Ranganath: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 3179-3183.10.1007/s11661-014-2276-3 ↗
12. A. Mohamadizadeh, A. Z. Hanzaki, H.R. Abedi, S. Mehtonen and D. Porter: Mater. Charact., 2015, vol. 107, pp. 293-301.10.1016/j.matchar.2015.07.028 ↗
13. S. Wang, L. G. Hou, J. R. Luo, J. S. Zhang and L. Z. Zhuang: J. Mater. Process. Tech., 2015, vol. 225, pp. 110-121.10.1016/j.jmatprotec.2015.05.018 ↗
14. H.Z. Li, H.J. Wang, X.P. Liang, H.T. Liu, Y. Liu and X.M. Zhang: Mater. Sci. Eng. A, 2011, vol. 528, pp.1548-1552.10.1016/j.msea.2010.10.080 ↗
15. D.X. Wen, Y.C. Lin, H.B. Li, X.M. Chen, J. Deng, L.T. Li: Mater. Sci. Eng. A, 2014, vol. 591, pp. 183-192.10.1016/j.msea.2013.09.049 ↗
16. A. Momeni, K. Dehghani, G. R. Ebeahimi and S. Kazemi: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5567-5576.10.1007/s11661-013-1841-5 ↗
17. S. K. Singh, K. Chattopadhyay and P. Dutta: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 3248-3258.10.1007/s11661-015-2855-y ↗
18. M. Dikovits, C. Poletti and F. Warchomicka: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 1586-1596.10.1007/s11661-013-2073-4 ↗
19. S. Banerjee, P. S. Robi and A. Srinivasan: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3834-3849.10.1007/s11661-012-1191-8 ↗
20. Y.C. Lin and G. Liu: Mater Sci Eng A, 2009, vol. 523, pp. 139-144.10.1016/j.msea.2009.05.056 ↗
21. W. C. Chen, C. H. J. Davies, I. V. Samarasekera, J. K. Brimacombe and E. B. Hawbolt: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 4095-4111.10.1007/BF02595658 ↗
22. J. S. Ahmad and J. Twomey: J. Mater. Process. Technol., 2007, vol. 186, pp. 339-345.10.1016/j.jmatprotec.2006.11.228 ↗
23. L. H. Feng and J. Lu: Expert. Syst. Appl., 2010, vol. 37, pp. 2974-297710.1016/j.eswa.2009.09.037 ↗
24. K. M. Kanti and P. S. Rao: J. Mater. Process. Technol., 2008, vol. 200, pp. 300-305.10.1016/j.jmatprotec.2007.09.034 ↗
25. L. M. Almeida and T. B. Ludermi: Neurocomputing, 2010, vol. 73, pp. 1438-1450.10.1016/j.neucom.2009.11.007 ↗
26. X.W. Yang, J.C. Zhu, Z.S. Nong, D. He, Z.H. Lai, Y. Liu and F.W. Liu: Trans. Nonferrous Met. Soc. China, 2013, vol. 23, pp. 788-795.10.1016/S1003-6326(13)62530-3 ↗
27. Y. Wang, Y. Zhang, X. Zeng and W. Ding: J. Mater. Sci., 2006, vol. 41, pp. 3603-3608.10.1007/s10853-005-5564-x ↗
28. S.B. Bhimavarapu, A.K. Maheshwari, D. Bhargava and S.P. Narayan: J. Mater. Sci., 2011, vol. 46, pp. 3191-3199.10.1007/s10853-010-5203-z ↗
29. M. Lentz, S. Gall, F. Schmack, H.M. Mayer and W. Reimers: J. Mater. Sci., 2014, vol. 49, pp 1121-1129.10.1007/s10853-013-7790-y ↗
30. F.A. Slooff, J. Zhou, J. Duszczyk and L. Katgerman: J. Mater. Sci., 2008, vol. 43, pp. 7165-7170.10.1007/s10853-008-3014-2 ↗
31. H.Y. Li, Y. Liu, X.C. Lu and X.J. Su: J. Mater. Sci., 2012, vol.47, pp. 5411-5418.10.1007/s10853-012-6427-x ↗
32. S. Banerjee, P.S. Robi and A. Srinivasan: J. Mater. Sci., 2012, vol. 47, pp. 929-948.10.1007/s10853-011-5873-1 ↗
33. Y.C. Lin, M.S Chen and J. Zhong: J. Mater. Process. tech., 2008, vol. 205, pp. 308-315.10.1016/j.jmatprotec.2007.11.113 ↗
34. H. Mirzadeh, J.M. Cabrera and A. Najafizadeh: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 108-123.10.1007/s11661-011-0836-3 ↗
35. Z. Akbari, H. Mirzadeh and J.M. Cabrera: Mater. Design, 2015, vol. 77, pp. 126-131.10.1016/j.matdes.2015.04.005 ↗
36. H.L. Wei, G.Q. Liu, X. Xiao, H.T. Zhao, H. Ding and R.M. Kan. Mater. Sci. Eng. A, 2013, vol. 564, pp. 140-146.10.1016/j.msea.2012.11.099 ↗
37. H. Liu, B. Liu, D. Li, H. Sun, F. Sun, X. Jin and Y. Zhang. J. Wuhan Univ. Technol., 2014, vol. 29, pp. 601-605.10.1007/s11595-014-0964-x ↗
38. H.L. Wei, G.Q. Liu, H.T. Zhao and M.H. Zhang: Mat. Sci. Eng. A, 2014, vol. 596, pp. 112-120.10.1016/j.msea.2013.12.063 ↗
39. H.L. Wei and G.Q. Liu: Mater. Design, 2014, vol. 56, pp. 437-444.10.1016/j.matdes.2013.11.009 ↗
40. S. Saadatkia, H. Mirzadeh and J.M. Cabrera: Mater. Sci. Eng. A, 2015, vol. 636, pp. 196-202.10.1016/j.msea.2015.03.104 ↗
41. Q. Lei, Z. Li, J. Wang, S. Li, L. Zhang and Q.Y. Dong: J. Mater. Sci., 2012, vol. 47, pp. 6034-6042.10.1007/s10853-012-6511-2 ↗
42. Y.V.R.K. Prasad and S. Sasidhara (Eds.), Hot Working Guide: A Compendium of Processing Maps, ASM International, Materials Park, OH, 1997.
43. T. Seshacharyulu, S.C. Medeiros, W.G. Frazier and Y.V.R.K. Prasad: Mater. Sci. Eng. A, 2000, vol. 284, pp.184-194.10.1016/S0921-5093(00)00741-3 ↗
44. T. Seshacharyulu, S.C. Medeiros, W.G. Frazier and Y.V.R.K. Prasad: Mater. Sci. Eng. A, 2002, vol. 325, pp.112-125.10.1016/S0921-5093(01)01448-4 ↗
45. H. Ziegler, Progress in Solid Mechanics, vol. 4, Wiley, New York, 1963