journal article·2020-12Open access

As-Built and Post-treated Microstructures of an Electron Beam Melting (EBM) Produced Nickel-Based Superalloy

Sneha Goel, Hitesh Mehtani, Shu-Wei Yao, Indradev Samajdar, Uta Klement, Shrikant Joshi

Abstract

Abstract The microstructures of an electron beam melted (EBM) nickel-based superalloy (Alloy 718) were comprehensively investigated in as-built and post-treated conditions, with particular focus individually on the contour (outer periphery) and hatch (core) regions of the build. The hatch region exhibited columnar grains with strong 〈001〉 texture in the build direction, while the contour region had a mix of columnar and equiaxed grains, with no preferred crystallographic texture. Both regions exhibited nearly identical hardness and carbide content. However, the contour region showed a higher number density of fine carbides compared to the hatch. The as-built material was subjected to two distinct post-treatments: (1) hot isostatic pressing (HIP) and (2) HIP plus heat treatment (HIP + HT), with the latter carried out as a single cycle inside the HIP vessel. Both post-treatments resulted in nearly an order of magnitude decrease in defect content in hatch and contour regions. HIP + HT led to grain coarsening in the contour, but did not alter the microstructure in the hatch region. Different factors that may be responsible for grain growth, such as grain size, grain orientation, grain boundary curvature and secondary phase particles, are discussed. The differences in carbide sizes in the hatch and contour regions appeared to decrease after post-treatment. After HIP + HT, similar higher hardness was observed in both the hatch and contour regions compared to the as-built material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. 1 T.J. Horn and O.L.A. Harrysson: Sci. Prog., 2012, vol. 95, pp. 255–82.10.3184/003685012X13420984463047 ↗
2. R.C. Benn and R.P. Salva: in 7th International Symposium on Superalloy 718 and Derivatives, TMS, Pittsburgh, 2010, pp. 455–69.10.1002/9781118495223.ch35 ↗
3. 3 W.E. Frazier: J. Mater. Eng. Perform., 2014, vol. 23, pp. 1917–28.10.1007/s11665-014-0958-z ↗
4. 4 X. Gong, T. Anderson, and K. Chou: Manuf. Rev., 2014, vol. 1, pp. 1–12.
5. 5 M.M. Attallah, R. Jennings, X. Wang, and L.N. Carter: MRS Bull., 2016, vol. 41, pp. 758–64.10.1557/mrs.2016.211 ↗
6. S. Goel: Licentiate Thesis, University West, 2019.
7. 7 J. Karlsson, M. Norell, U. Ackelid, H. Engqvist, and J. Lausmaa: J. Manuf. Process., 2015, vol. 17, pp. 120–6.10.1016/j.jmapro.2014.08.005 ↗
8. 8 P. Wang, W.J. Sin, M.L.S. Nai, J. Wei, P. Wang, W.J. Sin, M.L.S. Nai, and J. Wei: Materials (Basel)., 2017, vol. 10, p. 1121.10.3390/ma10101121 ↗
9. 9 W.J. Sames, F.A. List, S. Pannala, R.R. Dehoff, and S.S. Babu: Int. Mater. Rev., 2016, vol. 61, pp. 315–60.10.1080/09506608.2015.1116649 ↗
10. 10 S. Raghavan, B. Zhang, P. Wang, C.-N. Sun, M.L.S. Nai, T. Li, and J. Wei: Mater. Manuf. Process., 2017, vol. 32, pp. 1588–95.10.1080/10426914.2016.1257805 ↗
11. 11 G.A. Knorovsky, M.J. Cieslak, T.J. Headley, A.D. Romig, and W.E. Hammetter: Metall. Trans. A, 1989, vol. 20A, pp. 2149–58.10.1007/BF02650300 ↗
12. 12 M.M. Kirka, Y.S. Lee, D.A. Greeley, A. Okello, M.J. Goin, M.T. Pearce, and R.R. Dehoff: JOM, 2017, vol. 69, pp. 523–31.10.1007/s11837-017-2264-3 ↗
13. 13 R.G. Carlson and J.F. Radavich: in Superalloy 718-Metallurgy and Applications, The Minerals, Metals & Materials Society, Pittsburgh, USA, 1989, pp. 79–95.10.7449/1989/Superalloys_1989_79_95 ↗
14. 14 D. Zhang, Z. Feng, C. Wang, W. Wang, Z. Liu, and W. Niu: Mater. Sci. Eng. A, 2018, vol. 724, pp. 357–67.10.1016/j.msea.2018.03.073 ↗
15. 15 M.M. Kirka, K.A. Unocic, N. Raghavan, F. Medina, R.R. Dehoff, and S.S. Babu: JOM, 2016, vol. 68, pp. 1012–20.10.1007/s11837-016-1812-6 ↗
16. 16 A. Mitchell: in Superalloys 718, 625, 706 and Derivatives, Pittsburgh, USA, 2005, pp. 299–310.10.7449/2005/Superalloys_2005_299_310 ↗
17. A.D. Patel, J. Erbrick, K. Heck, and G. Maurer: in Superalloys 2012: 12th International Symposium on Superalloy, Champion, USA, 2012, pp. 595–600.10.1002/9781118516430.ch66 ↗
18. 18 H. Helmer, A. Bauereiß, R.F. Singer, and C. Körner: Mater. Sci. Eng. A, 2016, vol. 668, pp. 180–7.10.1016/j.msea.2016.05.046 ↗
19. 19 N. Raghavan, R. Dehoff, S. Pannala, S. Simunovic, M. Kirka, J. Turner, N. Carlson, and S.S. Babu: Acta Mater., 2016, vol. 112, pp. 303–14.10.1016/j.actamat.2016.03.063 ↗
20. 20 A.R. Balachandramurthi, J. Olsson, J. Ålgårdh, A. Snis, J. Moverare, and R. Pederson: Results Mater., 2019, vol. 1, p. 100017.10.1016/j.rinma.2019.100017 ↗
21. 21 D. Deng, J. Moverare, R.L. Peng, and H. Söderberg: Mater. Sci. Eng. A, 2017, vol. 693, pp. 151–63.10.1016/j.msea.2017.03.085 ↗
22. 22 P. Nandwana, M. Kirka, A. Okello, and R. Dehoff: Mater. Sci. Technol., 2018, vol. 34, pp. 612–19.10.1080/02670836.2018.1424379 ↗
23. 23 S. Goel, M. Ahlfors, F. Bahbou, and S. Joshi: J. Mater. Eng. Perform., 2019, vol. 28, pp. 673–80.10.1007/s11665-018-3712-0 ↗
24. 24 S. Goel, A. Sittiho, I. Charit, U. Klement, and S. Joshi: Addit. Manuf., 2019, vol. 28, pp. 727–37.
25. 25 S. Goel, K. Bourreau, J. Olsson, U. Klement, and S. Joshi: Materials (Basel)., 2020, vol. 13, p. 536.10.3390/ma13030536 ↗
26. 26 S.-H. Chang, S.-C. Lee, T.-P. Tang, and H.-H. Ho: Mater. Trans., 2006, vol. 47, pp. 426–32.10.2320/matertrans.47.426 ↗
27. 27 W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M.E. Aydinöz, and K.-P. Hoyer: Addit. Manuf., 2017, vol. 13, pp. 93–102.
28. ASTM E1245-03: ASTM-International, https://doi.org/10.1520/E1245-03R16.10.1520/E1245-03R16 ↗
29. A.J. Schwartz, M. Kumar, B.L. Adams, and D.P. Field: Electron Backscatter Diffraction in Materials Science, 2nd edn., Springer, Berlin, 2000.10.1007/978-1-4757-3205-4 ↗
30. 30 A.R. Balachandramurthi, J. Moverare, N. Dixit, D. Deng, and R. Pederson: Mater. Charact., 2019, vol. 149, pp. 82–94.10.1016/j.matchar.2019.01.018 ↗
31. 31 A.A. Antonysamy, J. Meyer, and P.B. Prangnell: Mater. Charact., 2013, vol. 84, pp. 153–68.10.1016/j.matchar.2013.07.012 ↗
32. C. Schnur: Master Thesis, University West, Sweden, 2017.
33. 33 A. Strondl, R. Fischer, G. Frommeyer, and A. Schneider: Mater. Sci. Eng. A, 2008, vol. 480, pp. 138–47.10.1016/j.msea.2007.07.012 ↗
34. 34 H.E. Helmer, C. Körner, and R.F. Singer: J. Mater. Res., 2014, vol. 29, pp. 1987–96.10.1557/jmr.2014.192 ↗
35. 35 M. Sundararaman and P. Mukhopadhyay: High Temp. Mater. Process., 1993, vol. 11, pp. 351–368.10.1515/HTMP.1993.11.1-4.351 ↗
36. 36 J. Akram, P. Chalavadi, D. Pal, and B. Stucker: Addit. Manuf., 2018, vol. 21, pp. 255–68.
37. 37 N. Vanderesse, M. Anderson, F. Bridier, and P. Bocher: J. Microsc., 2016, vol. 261, pp. 79–87.10.1111/jmi.12317 ↗
38. 38 M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: Metall. Trans. A, 1988, vol. 19A, pp. 453–65.10.1007/BF02649259 ↗
39. M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: in Superalloys 718, 625, 706 and Various Derivatives, Pittsburgh, USA, 1994, pp. 419–40.10.7449/1994/Superalloys_1994_419_440 ↗
40. 40 K.A. Unocic, L.M. Kolbus, R.R. Dehoff, S.N. Dryepondt, and B.A. Pint: in NACE Corrosion, NACE International, San Antonio, USA, 2014.
41. 41 P. Karimi, E. Sadeghi, D. Deng, H. Gruber, J. Andersson, and P. Nylén: Int. J. Adv. Manuf. Technol., 2018, vol. 99, pp. 2903–2913.10.1007/s00170-018-2621-6 ↗
42. S. Goel, J. Olsson, M. Ahlfors, U. Klement, and S. Joshi: in Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications, The Minerals, Metals & Materials Series, Pittsburgh, USA, 2018, pp. 115–29.10.1007/978-3-319-89480-5_6 ↗
43. 43 W.J. Sames, K.A. Unocic, R.R. Dehoff, T. Lolla, and S.S. Babu: J. Mater. Res., 2014, vol. 29, pp. 1920–30.10.1557/jmr.2014.140 ↗
44. 44 A.R. Balachandramurthi, J. Moverare, S. Mahade, and R. Pederson: Materials (Basel)., 2018, vol. 12, p. 68.10.3390/ma12010068 ↗
45. 45 C. Slama, C. Servant, and G. Cizeron: J. Mater. Res., 1997, vol. 12, pp. 2298–316.10.1557/JMR.1997.0306 ↗
46. 46 P. Karimi, E. Sadeghi, P. Åkerfeldt, J. Ålgårdh, and J. Andersson: Mater. Des., 2018, vol. 160, pp. 427–41.10.1016/j.matdes.2018.09.038 ↗
47. 47 S.H. Chang, S.C. Lee, T.P. Tang, and H.H. Ho: Int. J. Cast Met. Res., 2006, vol. 19, pp. 175–80.10.1179/136404606225023399 ↗
48. 48 X. Wang, Z. Huang, B. Cai, N. Zhou, O. Magdysyuk, Y. Gao, S. Srivatsa, L. Tan, and L. Jiang: Acta Mater., 2019, vol. 168, pp. 287–98.10.1016/j.actamat.2019.02.012 ↗
49. 49 B. Verlinden, J. Driver, I. Samajdar, and R.D. Doherty: Thermo-Mechanical Processing of Metallic Materials, 11th edn., Elsevier, Oxford, 2007.
50. 50 R. Seede, A. Mostafa, V. Brailovski, M. Jahazi, and M. Medraj: J. Manuf. Mater. Process., 2018, vol. 2, p. 30.
51. W.J. Sames: Ph.D. Thesis, Texas A&M University, 2015.
52. 52 J.M. Poole, K.R. Stultz, and J.M. Manning: in Superalloy 718-Metallurgy and Applications, The Minerals, Metals & Materials Society, Pittsburgh, USA, 1989, pp. 219–28.10.7449/1989/Superalloys_1989_219_228 ↗
53. S. Azadian: Ph.D. Thesis, Luleå University of Technology, 2004.
54. 54 M. Fisk, J. Andersson, R. du Rietz, S. Haas, and S. Hall: Mater. Sci. Eng. A, 2014, vol. 612, pp. 202–7.10.1016/j.msea.2014.06.036 ↗
55. 55 J.W. Brooks and P.J. Bridges: in Superalloys, Minerals, Metals & Materials Society, Champion, USA, 1988, pp. 33–42.
56. SAE International: Aerospace Material Specification, AMS5662, 2000.
57. SAE International: Aerospace Material Specification, AMS5383, 2012.
58. 58 V.A. Popovich, E.V. Borisov, A.A. Popovich, V.S. Sufiiarov, D.V. Masaylo, and L. Alzina: Mater. Des., 2017, vol. 131, pp. 12–22.10.1016/j.matdes.2017.05.065 ↗