Anisotropy of Mass Transfer During Sintering of Powder Materials with Pore–Particle Structure Orientation
Source abstract
Abstract
The Minerals, Metals & Materials Society and ASM International. A micromechanical model for the shrinkage anisotropy during sintering of metallic powders is proposed and experimentally assessed. The framework developed for modeling sintering based on the mechanism of grain boundary diffusion is extended to take into account the dislocation pipe-enhanced volume diffusion. The studied iron powder samples are pre-shaped into their green forms by uniaxial cold pressing before sintering step. The resultant green bodies are anisotropic porous structures, with inhomogeneous plastic deformation at the inter-particle contacts. These non-uniformities are considered to be the cause of the anisotropic dislocation pipe diffusion mechanisms, and thus of the undesired shape distortion during shrinkage. The proposed model describes the shrinkage rates in the compaction loading and transverse directions, as functions of both structural and geometric activities of the samples. Dislocation densities can be estimated from such equations using dilatometry and image analysis data. The reliability and applicability of the developed modeling framework are verified by comparing the calculated dislocation densities with outcomes of nanoindentation and electron backscatter diffraction-derived lattice rotations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (88)
Show source-provided references
1. 1. R.K. Bordia, Suk-Joong L. Kang and E.A. Olevsky, Journal of the American Ceramic Society 2017, vol. 100, pp. 2314-2352.10.1111/jace.14919 ↗
2. J. Frenkel, J. Phys. 1945, vol. 9, pp. 385–391.
3. 3. B. Ya Pines, J. Tech. Phys 1946, vol. 16, p. 137.
4. 4. G.C. Kuczynski, Journal of Applied Physics 1949, vol. 20, pp. 1160-1163.10.1063/1.1698291 ↗
5. 5. J.K. Mackenzie and R Shuttleworth, Proceedings of the Physical Society. Section B 1949, vol. 62, p. 833.10.1088/0370-1301/62/12/310 ↗
6. 6. C. Herring, Journal of Applied Physics 1950, vol. 21, pp. 301-303.10.1063/1.1699658 ↗
7. 7. W.D. Kingery and Morris Berg, Journal of Applied Physics 1955, vol. 26, pp. 1205-1212.10.1063/1.1721874 ↗
8. I.M. Lifshitz and V.V. Slyozov, J. Phys. Chem. Solids 1961, vol. 19, pp. 35-50.10.1016/0022-3697(61)90054-3 ↗
9. 9. R.L. Coble, Journal of applied physics 1961, vol. 32, pp. 787-792.10.1063/1.1736107 ↗
10. 10. F. Thümmler and W. Thomma, Metallurgical Reviews 1967, vol. 12, pp. 69-108.10.1179/imr.1967.12.1.69 ↗
11. 11. D.L. Johnson, Journal of Applied Physics 1969, vol. 40, pp. 192-200.10.1063/1.1657030 ↗
12. H.E. Exner (1979) Rev. Powder Metall. Phys. Ceram. 1(1/4): 1–251
13. 13. F.B. Swinkels and MF Ashby, Acta Metallurgica 1981, vol. 29, pp. 259-281.10.1016/0001-6160(81)90154-1 ↗
14. 14. Schatt W., Friedrich E. (1987) Dislocation-Activated Sintering Processes. In: Kuczynski G.C., Uskoković D.P., Palmour H., Ristić M.M. (eds) Sintering’85. Springer, Boston, MA
15. S.-J. L. Kang: Sintering: Densification, Grain Growth and Microstructure. Butterworth-Heinemann: Oxford, 2004.
16. M.N. Rahaman: Sintering of Ceramics. CRC Press: Boca Raton (2007).10.1201/b15869 ↗
17. 17. R.K. Bordia and GW Scherer, Acta metallurgica 1988, vol. 36, pp. 2393-2397.10.1016/0001-6160(88)90189-7 ↗
18. 18. R.K. Bordia and GW Scherer, Acta Metallurgica 1988, vol. 36, pp. 2399-2409.10.1016/0001-6160(88)90190-3 ↗
19. 19. R.K. Bordia and GW Scherer, Acta Metallurgica 1988, vol. 36, pp. 2411-2416.10.1016/0001-6160(88)90191-5 ↗
20. 20. E. A. Olevsky, Mater Sci Eng R Rep 1998, vol. 23, pp. 41-100.10.1016/S0927-796X(98)00009-6 ↗
21. 21. E.A. Olevsky, V. Tikare and T. Garino, Journal of the American Ceramic Society 2006, vol. 89, pp. 1914-1922.10.1111/j.1551-2916.2006.01054.x ↗
22. 22. Z-Z Du and ACF Cocks, Acta metallurgica et materialia 1992, vol. 40, pp. 1969-1979.10.1016/0956-7151(92)90183-F ↗
23. 23. RM McMeeking and LT Kuhn, Acta metallurgica et materialia 1992, vol. 40, pp. 961-969.10.1016/0956-7151(92)90073-N ↗
24. 24. H Riedel, H Zipse and J Svoboda, Acta metallurgica et materialia 1994, vol. 42, pp. 445-452.10.1016/0956-7151(94)90499-5 ↗
25. 25. D Bouvard and RM McMeeking, Journal of the American Ceramic Society 1996, vol. 79, pp. 666-672.10.1111/j.1151-2916.1996.tb07927.x ↗
26. 26. J. Pan: Computer modelling of sintering at different length scales. (Springer London, 2006).
27. 27. HA Kuhn and CL Downey, Int J Powder Met 1971, vol. 7, pp. 15-25.
28. 28. KT Kim and MM Carroll, International journal of plasticity 1987, vol. 3, pp. 63-73.10.1016/0749-6419(87)90018-0 ↗
29. 29. RJ Green, International Journal of Mechanical Sciences 1972, vol. 14, pp. 215-224.10.1016/0020-7403(72)90063-X ↗
30. Shima S and M Oyane, Int. J. Mech. Sci. 1976, vol. 18, pp. 285-291.10.1016/0020-7403(76)90030-8 ↗
31. 31. Arthur L Gurson, Journal of engineering materials and technology 1977, vol. 99, pp. 2-15.10.1115/1.3443401 ↗
32. 32. Y Corapcioglu and T Uz, Powder Technology 1978, vol. 21, pp. 269-274.10.1016/0032-5910(78)80095-3 ↗
33. 33. MB Shtern, GG Serdyuk, LA Maximenko, YV Truhan and Yu M Shulyakov, Naukova Dumka, Kiev 1982.
34. 34. V. Tvergaard, International Journal of fracture 1982, vol. 18, pp. 237-252.10.1007/BF00015686 ↗
35. 35. SM Doraivelu, HL Gegel, JS Gunasekera, JC Malas, JT Morgan and JF Thomas Jr, International Journal of Mechanical Sciences 1984, vol. 26, pp. 527-53510.1016/0020-7403(84)90006-7 ↗
36. 36. N.A. Fleck, L.T. Kuhn and RM McMeeking, Journal of the Mechanics and Physics of Solids 1992, vol. 40, pp. 1139-1162.10.1016/0022-5096(92)90064-9 ↗
37. V.V. Skorohod: Rheological Basis of the Sintering Theory, Naukova Dumka, Kiev, 1972.
38. 38. D Giuntini, I-W Chen and EA Olevsky, Scripta Materialia 2016, vol. 124, pp. 38-41.10.1016/j.scriptamat.2016.06.024 ↗
39. H.E. Exner and E. Arzt (1990) Sintering Key Papers, Springer, Berlin, pp 157-184.10.1007/978-94-009-0741-6_10 ↗
40. 40. A.L. Maximenko and Eugene A Olevsky, Acta materialia 2004, vol. 52, pp. 2953-2963.10.1016/j.actamat.2004.02.042 ↗
41. 41. D. Giuntini, X. Wei, A.L. Maximenko, L. Wei, A.M. Ilyina and E.A. Olevsky, International Journal of Refractory Metals and Hard Materials 2013, vol. 41, pp. 501-506.10.1016/j.ijrmhm.2013.06.009 ↗
42. 42. R.K. Bordia, R. Zuo, O. Guillon, S.M .Salamone and J. Rödel, Acta materialia 2006, vol. 54, pp. 111-118.10.1016/j.actamat.2005.08.025 ↗
43. 43. H. Shang, A. Mohanram, E. Olevsky and R. K Bordia, Journal of the European Ceramic Society 2016, vol. 36, pp. 2937-2945.10.1016/j.jeurceramsoc.2015.12.042 ↗
44. 44. E.A. Olevsky, B. Kushnarev, A. Maximenko, V. Tikare and M. Braginsky, Philosophical Magazine 2005, vol. 85, pp. 2123-2146.10.1080/14786430412331331989 ↗
45. 45. F.Wakai and R.K. Bordia, Journal of the American Ceramic Society 2012, vol. 95, pp. 2389-2397.10.1111/j.1551-2916.2012.05211.x ↗
46. 46. A. Zavaliangos, J.M. Missiaen and D. Bouvard, Science of Sintering 2006, vol. 38, pp. 13-2510.2298/SOS0601013Z ↗
47. 47. A. Zavaliangos and D. Bouvard, International journal of powder metallurgy 2000, vol. 36, pp. 58-65
48. 48. A. Molinari, C. Menapace, E. Torresani, I. Cristofolini and M. Larsson, Powder Metallurgy 2013, vol. 56, pp. 189-195..10.1179/1743290112Y.0000000043 ↗
49. A. Molinari, E Torresani, C Menapace, I Cristofolini, and M. Larsson, in Powdermet 2013, (American Powder Metallurgy Institute), pp. 525–32.
50. 50. A Molinari and E Torresani, Powder Metallurgy 2015, vol. 58, pp. 323-327.10.1080/00325899.2015.1133078 ↗
51. A. Molinari, I. Cristofolini, E. Torresani, Adv. Powder Metall. Part. Mater. (2015) 3:9–18.
52. 52. A. Molinari, E. Torresani, C. Menapace and M. Larsson, Journal of the American Ceramic Society 2015, vol. 98, pp. 3431-3437.10.1111/jace.13852 ↗
53. 53. W. Zhang and J.H. Schneibel, Acta metallurgica et materialia 1995, vol. 43, pp. 4377-4386.10.1016/0956-7151(95)00115-C ↗
54. 54. EW Hart, Acta Metallurgica 1957, vol. 5, p. 59710.1016/0001-6160(57)90127-X ↗
55. 55. M.Cohen, Transactions of the Japan Institute of Metals 1970, vol. 11, pp. 145-15110.2320/matertrans1960.11.145 ↗
56. E. Olevsky and V. Skorohod, Le Journal de Physique IV 1993, vol. 3, pp. C7-739-C7-742.
57. 57. P.M. Raj and W.R. Cannon, Journal of the American Ceramic Society 1999, vol. 82, pp. 2619-2625..10.1111/j.1151-2916.1999.tb02132.x ↗
58. 58. P.M.Raj, A. Odulena and W.R. Cannon, Acta materialia 2002, vol. 50, pp. 2559-2570..10.1016/S1359-6454(02)00083-6 ↗
59. 59. S Krug, JRG Evans and JHH Ter Maat, Journal of the European Ceramic Society 2002, vol. 22, pp. 173-181.10.1016/S0955-2219(01)00259-X ↗
60. 61. W.D. Nix and H. Gao, Journal of the Mechanics and Physics of Solids 1998, vol. 46, pp. 411-425.10.1016/S0022-5096(97)00086-0 ↗
61. 62. J.G. Swadener, E.P. George and G.M. Pharr, Journal of the Mechanics and Physics of Solids 2002, vol. 50, pp. 681-694.10.1016/S0022-5096(01)00103-X ↗
62. 63. Z Zong, J Lou, OO Adewoye, AA Elmustafa, F Hammad and WO Soboyejo, Materials Science and Engineering: A 2006, vol. 434, pp. 178-187.10.1016/j.msea.2006.06.137 ↗
63. 64. M. Gee, K. Mingard and B. Roebuck, International Journal of Refractory Metals and Hard Materials 2009, vol. 27, pp. 300-312.10.1016/j.ijrmhm.2008.09.003 ↗
64. 65. DP Field, CC Merriman, N Allain-Bonasso and F Wagner, Modelling and Simulation in Materials Science and Engineering 2012, vol. 20, p. 024007.10.1088/0965-0393/20/2/024007 ↗
65. C. Zhu, T. Harrington, V.A Livescu, G.T. Gray and K.S. Vecchio, Acta Mater. 2016, vol. 118, pp. 383-394.10.1016/j.actamat.2016.07.051 ↗
66. 67. Y. Shima, Y. Ishikawa, H. Nitta, Y. Yamazaki, K.Mimura, M. Isshiki and Y.Iijima, Materials Transactions 2002, vol. 43, pp. 173-177.10.2320/matertrans.43.173 ↗
67. 68. A Verma, M Sundararaman, JB Singh and SA Nalawade, Measurement Science and Technology 2010, vol. 21, p. 10510610.1088/0957-0233/21/10/105106 ↗
68. 69. J. Park, M. Jung and Y-K Lee, Journal of Magnetism and Magnetic Materials 2015, vol. 377, pp. 193-196.10.1016/j.jmmm.2014.10.092 ↗
69. E.D. Hondros and N.P. Allen (1965) Proc. R. Soc. Lond. A 286 (1407), pp. 479-498.10.1098/rspa.1965.0158 ↗
70. 71. G.M. Pharr, E.G. Herbert and Y. Gao, Annual Review of Materials Research 2010, vol. 40, pp. 271-292.10.1146/annurev-matsci-070909-104456 ↗
71. E. Torresani, G. Ischia, and A. Molinari: in European Congress and Exhibition on Powder Metallurgy. European PM Conference Proceedings (The European Powder Metallurgy Association: 2014), p 1
72. 72. H. Gao and Y. Huang, International Journal of Solids and Structures 2001, vol. 38, pp. 2615-2637.10.1016/S0020-7683(00)00173-6 ↗
73. 73. G.Z. Voyiadjis and A.H. Almasri, Journal of engineering mechanics 2009, vol. 135, pp. 139-148.10.1061/(ASCE)0733-9399(2009)135:3(139) ↗
74. 74. D. Faghihi and G.Z. Voyiadjis, Mechanics of Materials 2012, vol. 44, pp. 189-211.10.1016/j.mechmat.2011.07.002 ↗
75. 75. JF Nye, Acta metallurgica 1953, vol. 1, pp. 153-162.10.1016/0001-6160(53)90054-6 ↗
76. E. Kröner, Continuum Theory of Dislocation and Self-Stresses, Springer: Berlin (1958).
77. 77. C.Zhu, V. Livescu, T. Harrington, O. Dippo, G.T. Gray and K.S. Vecchio, International Journal of Plasticity 2017, vol. 92, pp. 148-16310.1016/j.ijplas.2017.03.009 ↗
78. 78. E. Demir, D. Raabe, N. Zaafarani and S. Zaefferer, Acta Materialia 2009, vol. 57, pp. 559-569.10.1016/j.actamat.2008.09.039 ↗
79. BC Larson, W Yang, JZ Tischler, GE Ice, JD Budai, W Liu and H Weiland, Int. J. Plast. 2004, vol. 20, pp. 543-560.10.1016/S0749-6419(03)00101-3 ↗
80. AJ Wilkinson and D Randman (2010) Philos Mag, vol. 90, pp. 1159-1177.10.1080/14786430903304145 ↗
81. 81. FRD Boer, R Boom, W Mattens, A Miedema and A Niessen, (North Holland, Amsterdam: 1989).
82. 82. WR Tyson and WA Miller, Surface Science 1977, vol. 62, pp. 267-276.10.1016/0039-6028(77)90442-3 ↗
83. 83. TA Roth, Materials Science and Engineering 1975, vol. 18, pp. 183-192.10.1016/0025-5416(75)90168-8 ↗
84. 84. A Inoue, H Nitta and Y Iijima, Acta Materialia 2007, vol. 55, pp. 5910-5916.10.1016/j.actamat.2007.06.041 ↗
85. R.E. Smallman and A.H.W. Ngan: Physical Metallurgy and Advanced Materials. Butterworth-Heinemann: Oxford (2011).
86. W.F. Gale and T.C. Totemeier: Smithells Metals Reference Book. Elsevier: Oxford (2003).
87. 87. G Stechauner and E Kozeschnik, Calphad 2014, vol. 47, pp. 92-99.10.1016/j.calphad.2014.06.008 ↗
88. Nosewicz S, Rojek J, Chmielewski M. Pietrzak K, Advanced Powder Technology Vol. 28, 2017, 1745-175910.1016/j.apt.2017.04.012 ↗