journal article·2019-02-15

Sample Size and Strain-Rate-Sensitivity Effects on the Homogeneity of High-Pressure Torsion Deformed Disks

A. Hohenwarter, R. Pippan

Publisher page

Abstract

High-pressure torsion (HPT) has advanced to one of the leading severe plastic deformation (SPD) techniques over the last several years due to some unsurpassable advantages in comparison with other SPD techniques. In order to overcome the drawback of the generally small sample dimensions, novel HPT setups have been designed recently. The mechanical and microstructural results, however, may also be affected by the sample size used. To investigate the transferability of the results between different sample dimensions, a comparative study on copper was performed. The hardness distribution of different sample sizes ranging between 8 and 60 mm in diameter with a thickness of 0.6 and 12 mm was measured and accompanied with microstructural investigations. It will be shown that the results obtained from different disks are sample-size independent when some simple guidelines are obeyed. The influence of the significant factors, such as sample aspect ratio, deformation speed, and strain rate sensitivity, on the resulting mechanical and microstructural properties are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · High-Velocity Impact and Material Behavior · Surface Treatment and Residual Stress

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. P.W. Bridgman: Phys. Rev., 1935, vol. 48, p. 825-47.10.1103/PhysRev.48.825 ↗
2. A.P. Zhilyaev and T.G. Langdon: Progr. Mater. Sci., 2008, vol. 53, p. 893-979.10.1016/j.pmatsci.2008.03.002 ↗
3. K. Edalati and Z. Horita: Mater. Sci. Eng. A, 2016, vol. 652, p. 325-52.10.1016/j.msea.2015.11.074 ↗
4. R. Pippan, S. Scheriau, A. Taylor, M. Hafok, A. Hohenwarter, and A. Bachmaier: Ann. Rev. Mater. Res., 2010, vol. 40, pp. 319–43.10.1146/annurev-matsci-070909-104445 ↗
5. K. Edalati and Z. Horita: Acta Mater., 2011, vol. 59, p. 6831-36.10.1016/j.actamat.2011.07.046 ↗
6. K. Edalati, S. Toh, Y. Ikoma, and Z. Horita: Scripta Mater., 2011, vol. 65, p. 974-77.10.1016/j.scriptamat.2011.08.024 ↗
7. M. Ashida, T. Hamachiyo, K. Hasezaki, H. Matsunoshita, M. Kai, and Z. Horita: J. Phys. Chem. Solids, 2009, vol. 70, p. 1089-92.10.1016/j.jpcs.2009.06.002 ↗
8. A. Bachmaier, A. Hohenwarter, and R. Pippan: Scripta Mater., 2009, vol. 61, p. 1016-19.10.1016/j.scriptamat.2009.08.016 ↗
9. I. Sabirov and R. Pippan: Scripta Mater., 2005, vol. 52, p. 1293-98.10.1016/j.scriptamat.2005.02.017 ↗
10. A. Bachmaier, M. Pfaff, M. Stolpe, H. Aboulfadl, and C. Motz: Acta Mater., 2015, vol. 96, p. 269-83.10.1016/j.actamat.2015.05.053 ↗
11. B. Oberdorfer, D. Setman, E.M. Steyskal, A. Hohenwarter, W. Sprengel, M. Zehetbauer, R. Pippan, and R. Würschum: Acta Mater., 2014, vol. 68, p. 189-95.10.1016/j.actamat.2013.12.036 ↗
12. O. Renk, A. Hohenwarter, S. Wurster, and R. Pippan: Acta Mater., 2014, vol. 77, p. 401-10.10.1016/j.actamat.2014.06.010 ↗
13. R.Z. Valiev, I.P. Semenova, V.V. Latysh, H. Rack, T.C. Lowe, J. Petruzelka, L. Dluhos, D. Hrusak, and J. Sochova: Adv. Eng. Mater., 2008, vol. 10, p. B15-B17, 702.10.1002/adem.200800026 ↗
14. K. Edalati, M. Matsuo, H. Emami, S. Itano, A. Alhamidi, A. Staykov, D.J. Smith, S. Orimo, E. Akiba, and Z. Horita: Scripta Mater., 2016, vol. 124, p. 108-11.10.1016/j.scriptamat.2016.07.007 ↗
15. G. Sakai, K. Nakamura, Z. Horita, and T.G. Langdon: Mater. Sci. Eng. A, 2005, vol. 406, p. 268-73.10.1016/j.msea.2005.06.049 ↗
16. Y. Harai, Y. Ito, and Z. Horita: Scripta Mater., 2008, vol. 58, p. 469-72.10.1016/j.scriptamat.2007.10.037 ↗
17. L.S. Tóth, M. Arzaghi, J.J. Fundenberger, B. Beausir, O. Bouaziz, and R. Arruffat-Massion: Scripta Mater., 2009, vol. 60, p. 175-77.10.1016/j.scriptamat.2008.09.029 ↗
18. Y. Ivanisenko, R. Kulagin, V. Fedorov, A. Mazilkin, T. Scherer, B. Baretzky, and H. Hahn: Mater. Sci. Eng. A, 2016, vol. 664, p. 247-56.10.1016/j.msea.2016.04.008 ↗
19. A. Hohenwarter: Mater. Sci. Eng. A, 2015, vol. 626, p. 80-85.10.1016/j.msea.2014.12.041 ↗
20. R. Pippan, S. Scheriau, A. Hohenwarter, and M. Hafok: Mater. Sci. Forum, 2008, vols. 584–586, p. 16-21.10.4028/www.scientific.net/MSF.584-586.16 ↗
21. A. Hohenwarter, A. Bachmaier, B. Gludovatz, S. Scheriau, and R. Pippan: Int. J. Mater. Res., 2009, vol. 100, p. 1653-61.10.3139/146.110224 ↗
22. A. Hohenwarter, M. Rockenschaub, and R. Pippan: in Promoting Advanced Materials by SPD and Phase Transformation, Z. Horita and K. Edalati, eds., Kyushu University, 2017, pp. 74–75.
23. K. Edalati, R. Miresmaeili, Z. Horita, H. Kanayama, and R. Pippan: Mater. Sci. Eng. A, 2011, vol. 528, p. 7301-305.10.1016/j.msea.2011.06.031 ↗
24. P.H.R. Pereira, R.B. Figueiredo, Y. Huang, P.R. Cetlin, and T.G. Langdon: Mater. Sci. Eng. A, 2014, vol. 593, p. 185-88.10.1016/j.msea.2013.11.015 ↗
25. R.B. Figueiredo, P. H. R. Pereira, M. T. P. Aguilar, P.R. Cetlin, and T.G. Langdon: Acta Mater., 2012, vol. 60, p. 3190-98.10.1016/j.actamat.2012.02.027 ↗
26. R.B. Figueiredo and T.G. Langdon: Mater. Sci. Eng. A, 2011, vol. 528, p. 4500-506.10.1016/j.msea.2011.02.048 ↗
27. D.J. Lee, E.Y. Yoon, L.J. Park, and H.S. Kim: Scripta Mater., 2012, vol. 67, p. 384-87.10.1016/j.scriptamat.2012.05.024 ↗
28. F. Wetscher, A. Vorhauer, and R. Pippan: Mater. Sci. Eng. A, 2005, vols. 410–411, p. 213-16.10.1016/j.msea.2005.08.027 ↗
29. H.W. Höppel, J. May, P. Eisenlohr, and M. Göken: Z. Met., 2005, vol. 96, p. 566-71.10.3139/146.101071 ↗
30. K.S. Kormout, R. Pippan, and A. Bachmaier: Adv. Eng. Mater., 2017, vol. 19, art. no. 1600675.10.1002/adem.201600675 ↗
31. V. Maier-Kiener, X. An, L. Li, Z. Zhang, R. Pippan, and K. Durst: J. Mater. Res., 2017, vol. 32, p. 4583-91.10.1557/jmr.2017.320 ↗
32. H. Jiang, Y.T. Zhu, D.P. Butt, I.V Alexandrov, and T.C. Lowe: Mater. Sci. Eng. A, 2000, vol. 290, p. 128-38.10.1016/S0921-5093(00)00919-9 ↗
33. A.I. Almazrouee, K.J. Al-Fadhalah, S.N. Alhajeri, and T.G. Langdon: Mater. Sci. Eng. A, 2015, vol. 641, p. 21-28.10.1016/j.msea.2015.06.016 ↗
34. X.H. An, S.D. Wu, Z.F. Zhang, R.B. Figueiredo, N. Gao, and T.G. Langdon: Scripta Mater., 2010, vol. 63, p. 560-63.10.1016/j.scriptamat.2010.05.030 ↗
35. K. Edalati, T. Fujioka, and Z. Horita: Mater. Sci. Eng. A, 2008, vol. 497, p. 168-73.10.1016/j.msea.2008.06.039 ↗
36. A. Hohenwarter and R. Pippan: Mater. Sci. Eng. A, 2012, vol. 540, p. 89-96.10.1016/j.msea.2012.01.089 ↗
37. G.B. Rathmayr and R. Pippan: Acta Mater., 2011, vol. 59, p. 7228-40.10.1016/j.actamat.2011.08.023 ↗