Synthesis and Air Jet Erosion Study of AlXFe1.5CrMnNi0.5 (x = 0.3, 0.5) High-Entropy Alloys
Source abstract
Abstract
The aim of the present study was to synthesize AlXFe1.5CrMnNi0.5 (x = 0.3, 0.5) high-entropy alloys by mechanical alloying followed by conventional sintering. Phase analysis was investigated using X-ray diffractometry, and transmission electron microscopy. The particle morphology and composition were investigated using scanning electron microscopy and energy-dispersive spectroscopy, respectively. Thermodynamic parameters were calculated and analyzed to explain the formation of a solid solution. XRD analysis revealed that the major and the minor phases in AlXFe1.5CrMnNi0.5 (x = 0.3, 0.5) high-entropy alloys are of BCC and FCC structure, respectively. Analysis of selected area electron diffraction pattern of powder AlXFe1.5CrMnNi0.5 (x = 0.3, 0.5) HEAs concurred with the XRD results. Microstructural features and mechanism for solid solution formation have been conferred in detail. Differential scanning calorimetric analysis of these alloys confirmed that substantial phase change occurs at a temperature of 935.12 °C in case of Al0.3Fe1.5CrMnNi0.5 HEA. The effect of aluminum content and different sintering atmosphere on phase evolution, hardness, density, and air jet erosion property are investigated. The air jet erosion study of the sintered alloys was investigated at 90, 75, 60, and 45 deg angle of impingement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, S.Y. Chang: Adv. Eng. Mater., 2004, vol. 6, pp. 299–303.10.1002/adem.200300567 ↗
2. B.S. Murty, J.W. Yeh, S. Ranganthan: High-Entropy Alloys, Elsevier Ltd, New York, 2014.10.1016/B978-0-12-800251-3.00002-X ↗
3. Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw, Z.P. Lu: Prog. Mater. Sci., 2014, vol. 61, pp. 1–93.10.1016/j.pmatsci.2013.10.001 ↗
4. Z. Wang, I. Baker: Mater. Lett., 2016, vol. 180, pp. 153–57.10.1016/j.matlet.2016.05.122 ↗
5. S.T. Chen, W.Y. Tang, Y.F. Kuo, S.Y. Chen, C.H. Tsau, T.T. Shun, J.W. Yeh: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5818–25.10.1016/j.msea.2010.05.052 ↗
6. C.P. Lee, C.C. Chang, Y.Y. Chen, J.W. Yeh, H.C. Shih: Corros. Sci., 2008, vol. 50, pp. 2053–60.10.1016/j.corsci.2008.04.011 ↗
7. C.P. Lee, Y.Y. Chen, C.Y. Hsu, J.W. Yeh, H.C. Shih: Thin Solid Films, 2008, vol. 517, pp. 1301–05.10.1016/j.tsf.2008.06.014 ↗
8. D. Kumar, O. Maulik, S. Kumar, Y.V.S.S. Prasad, V. Kumar: Mater. Chem. Phys., 2018, vol. 210, pp. 71–7710.1016/j.matchemphys.2017.08.049 ↗
9. W.Y. Tang, M.H. Chuang, H.Y. Chen, J.W. Yeh: Surf. Coatings Technol., 2010, vol. 204, pp. 3118–24.10.1016/j.surfcoat.2010.02.045 ↗
10. M.H. Chuang, M.H. Tsai, C.W. Tsai, N.H. Yang, S.Y. Chang, J.W.Yeh, S.K. Chen, S.J. Lin: J. Alloys Compd., 2013, vol. 551, pp. 12–18.10.1016/j.jallcom.2012.09.133 ↗
11. V. Soare, M. Burada, I. Constantin, D. Mitrica, V. Badilita, A. Caragea, M. Tarcolea: Appl. Surf. Sci., 2015, vol. 358, pp. 533–39.10.1016/j.apsusc.2015.07.142 ↗
12. Y. Shi, B. Yang, X. Xie, J. Brechtl, K.A. Dahmen, P.K. Liaw: Corros. Sci., 2017, vol. 119, pp. 33–4510.1016/j.corsci.2017.02.019 ↗
13. T. Cao, J. Shang, J. Zhao, C. Cheng, R. Wang, H. Wang: Mater. Lett., 2016, vol. 164, pp. 344–4710.1016/j.matlet.2015.11.016 ↗
14. L.C. Tsao, C.S. Chen, C.P. Chu: Mater. Des., 2012, vol. 36, pp 854–5810.1016/j.matdes.2011.04.067 ↗
15. Y. F. Kao, T. J. Chen, S. K. Chen, J.W. Yeh: J. Alloys Compd., 2009, vol. 488, pp. 57–6410.1016/j.jallcom.2009.08.090 ↗
16. S.Q. Xia, M.C. Gao, Y. Zhang: Mater. Chem. Phys., 2017, vol. 210, pp. 213–22110.1016/j.matchemphys.2017.06.021 ↗
17. Y. Lv, R. Hu, Z. Yao, J. Chen, D. Xu, Y. Liu, X. Fan: Mater. Des., 2017, vol. 132, pp. 392–9910.1016/j.matdes.2017.07.008 ↗
18. S. Praveen, B.S. Murty, R.S. Kottada: Mater. Sci. Eng. A, 2012, vol. 534, pp. 83–8910.1016/j.msea.2011.11.044 ↗
19. O. Maulik, V. Kumar: Mater. Charact., 2015, vol. 110, pp. 116–25.10.1016/j.matchar.2015.10.025 ↗
20. C. Wang, W. Ji, Z. Fu: Adv. Powder Technol., 2014, vol. 25, pp. 1334–38.10.1016/j.apt.2014.03.014 ↗
21. Y.L. Chen, Y.H. Hu, C.A. Hsieh, J.W. Yeh, S.K. Chen: J. Alloys Compd., 2009, vol. 481, pp. 768–75.10.1016/j.jallcom.2009.03.087 ↗
22. D. Kumar, O. Maulik, S. Kumar, V.K. Sharma, Y.V.S.S. Prasad, V. Kumar: Mater. Res. Express, 2017. Doi: 10.1088/2053-1591/aa96df/meta10.1088/2053-1591/aa96df/meta ↗
23. H. Khanchandani, P. Sharma, R. Kumar, O. Maulik, V. Kumar: Adv. Powder Technol. 2016, vol. 27, pp. 289–94.10.1016/j.apt.2016.01.001 ↗
24. H. A. Baghbaderani, S. Sharafi, M. D. Chermahini: Powder Technol., 2012, vol. 230, pp. 241–46.10.1016/j.powtec.2012.07.039 ↗
25. X. Yang, Y. Zhang: Mater. Chem. Phys., 2012, vol. 132, pp. 233–38.10.1016/j.matchemphys.2011.11.021 ↗
26. S. Guo, C.T. Liu: Prog. Nat. Sci. Mater. Int., 2011, vol. 21, pp. 433–46.10.1016/S1002-0071(12)60080-X ↗
27. A. Takeuchi, A. Inoue: Mater. Trans., 2005, vol. 46, pp. 2817–29.10.2320/matertrans.46.2817 ↗
28. W.D. Callister, Jr, D.G. Rethwisch: Material Science and Engineering an Introduction, 8th ed, Wiley, Hoboken, 2009.
29. Z. Wang, S. Guo, C.T. Liu: Jom, 2014, vol. 66, pp. 1966–72.10.1007/s11837-014-0953-8 ↗
30. J.W. Yeh: Jom, 2015, vol. 67, pp. 2254–61.10.1007/s11837-015-1583-5 ↗
31. W.Y. Tang, M.H. Chuang, H.Y. Chen, J.W. Yeh: Surf. Coatings Technol., 2010, vol. 204, pp. 3118–24.10.1016/j.surfcoat.2010.02.045 ↗
32. O.N. Senkov, C.F. Woodward: Mater. Sci. Eng. A, 2011, vol. 529, pp. 311–20.10.1016/j.msea.2011.09.033 ↗
33. M. Divakar, V.K. Agarwal, S.N. Singh: Wear, 2005, vol. 259, pp. 110–17.10.1016/j.wear.2005.02.004 ↗
34. J.R.L. Camacho, A.M. Chavez, J.V. Mendez, M.V. Torres, E.A.G. Hernandez: Wear, 2013, vol. 301, pp. 398–405.10.1016/j.wear.2012.12.047 ↗
35. Q.B. Nguyen, V.B. Nguyen, C.Y.H. Lim, Q.T. Trinh, S. Sankaranarayanan, Y.W. Zhang, M. Gupta: Wear, 2014, vol. 321, pp. 87–93.10.1016/j.wear.2014.10.010 ↗
36. V.B. Nguyen, Q.B. Nguyen, Y.W. Zhang, C.Y.H. Lim, B.C. Khoo: Wear, 2016, vol. 348–349, pp. 126–37.10.1016/j.wear.2015.12.003 ↗