journal article·2017-10Open access

Dynamic Restoration Processes in a 23Cr-6Ni-3Mo Duplex Stainless Steel: Effect of Austenite Morphology and Interface Characteristics

N. Haghdadi, P. Cizek, H. Beladi, P. D. Hodgson

Abstract

The austenite and ferrite microstructure evolution and restoration mechanisms were studied during hot uniaxial compression of a 23Cr-6Ni-3Mo duplex stainless steel with two markedly different austenite morphologies (i.e., equiaxed and Widmanstatten). The deformation was performed at a temperature of 1273 K (1000 °C) at a strain rate of 0.1 s−1. The strain was preferentially partitioned in ferrite for both the microstructures studied. Both austenite morphologies displayed frequent splitting into complex-shaped deformation bands, containing dislocation cells and local stacking faults. Equiaxed austenite was favorable to the local development of microbands (MBs), while its Widmanstatten counterpart appeared to be completely resistant to their formation. This was attributed to the complexity of deformation inside the irregularly shaped Widmanstatten plates precluding the formation of self-screening MB arrays. The MB boundaries were typically aligned along highly stressed slip planes. The presence of discontinuous dynamic recrystallization (DDRX) within both the austenite morphologies was very limited. A slightly higher fraction of DDRX was detected in Widmanstatten austenite, compared to equiaxed austenite, which was ascribed to its higher contribution to the overall deformation and lower fraction of low-mobility coherent twin boundaries. Furthermore, it was demonstrated that continuous dynamic recrystallization (CDRX) was the main restoration mechanism within ferrite for both the microstructure types studied. The CDRX development within ferrite was accelerated in the microstructure with equiaxed austenite. This was related to the comparatively lower fraction of coherent interphases in this microstructure, which would hinder the slip transmission across the interphase and make the strain concentrate within ferrite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. R.N. Gunn: Duplex Stainless Steels: Microstructure, Properties and Applications, Woodhead Publishing, Cambridge, 1997.10.1533/9781845698775 ↗
2. A. Iza-Mendia, A. Pinol-Juez, J.J. Urcola and I. Gutierrez: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2975-86.10.1007/s11661-998-0205-z ↗
3. L. Duprez, B.C. De Cooman and N. Akdut: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1931-38.10.1007/s11661-002-0026-4 ↗
4. J.M. Cabrera, A. Mateo, L. Llanes, J.M. Prado and M. Anglada: J. Mater. Proc. Technol., 2003, vol. 143, pp. 321-25.10.1016/S0924-0136(03)00434-5 ↗
5. A. Dehghan-Manshadi: Evolution of Recrystallization during and Following Hot Deformation. PhD thesis, Deakin University, 2007.
6. N. Haghdadi, D. Martin and P.D. Hodgson: Mater. Des., 2016, vol. 106, pp. 420-27.10.1016/j.matdes.2016.05.118 ↗
7. P. Cizek: Acta Mater., 2016, vol. 106, pp. 129-43.10.1016/j.actamat.2016.01.012 ↗
8. N. Haghdadi, P. Cizek, H. Beladi and P.D. Hodgson: Acta Mater., 2017, vol. 126, pp. 44-57.10.1016/j.actamat.2016.12.045 ↗
9. N. Haghdadi, P. Cizek, H. Beladi and P.D. Hodgson: Philos. Mag., 2017, vol. 97, pp. 1209-37.10.1080/14786435.2017.1293860 ↗
10. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier Science, New York, 2004.
11. T. Sakai and J.J. Jonas: Acta Metall., 1984, vol. 32, pp. 189-209.10.1016/0001-6160(84)90049-X ↗
12. E. Brünger, X. Wang and G. Gottstein: Scripta Mater., 1998, vol. 38, pp. 1843-49.10.1016/S1359-6462(98)00124-9 ↗
13. H. Beladi, P. Cizek and P.D. Hodgson: Metall. Mater. Trans. A, 2009, vol. 40, pp. 1175-89.10.1007/s11661-009-9799-z ↗
14. H. Beladi, P. Cizek and P.D. Hodgson: Scr. Mater., 2009, vol. 61, pp. 528-31.10.1016/j.scriptamat.2009.05.013 ↗
15. H. Beladi, P. Cizek and P.D. Hodgson: Scr. Mater., 2010, vol. 62, pp. 191-94.10.1016/j.scriptamat.2009.10.022 ↗
16. H. Beladi, P. Cizek and P.D. Hodgson: Acta Mater., 2010, vol. 58, pp. 3531-41.10.1016/j.actamat.2010.02.026 ↗
17. H. Beladi, P. Cizek and P.D. Hodgson: Acta Mater., 2011, vol. 59, pp. 1482-92.10.1016/j.actamat.2010.11.012 ↗
18. A. Piñol-Juez, A. Iza-Mendia and I. Gutiérrez: Metall. Mater. Trans. A, 2000, vol. 31, pp. 1671-77.10.1007/s11661-000-0177-0 ↗
19. C.G. Schmidt, C.M. Young, B. Walser, R.H. Klundt and O.D. Sherby: Metall. Trans. A, 1982, vol. 13, pp. 447-56.10.1007/BF02643353 ↗
20. Baczynski and J.J. Jonas: Metall. Mater. Trans., 1998, vol. 29, pp. 447-62.10.1007/s11661-998-0125-y ↗
21. F. Gao, Y. Xu, B. Song and K. Xia: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 21-27.10.1007/s11661-000-0048-8 ↗
22. C. Huang, E.B. Hawbolt, X. Chen, T.R. Meadowcroft and D.K. Matlock: Acta Mater., 2001, vol. 49, pp. 1445-52.10.1016/S1359-6454(01)00032-5 ↗
23. L. Li, W. Yang and Z. Sun: Metall. Mater. Trans. A, 2006, vol. 37, pp. 609-19.
24. A. Oudin, P.D. Hodgson and M.R. Barnett: Mater. Sci. Eng. A, 2008, vol. 486, pp. 72-79.10.1016/j.msea.2007.09.045 ↗
25. C. Castan, F. Montheillet and A. Perlade: Scripta Mater., 2013, vol. 68, pp. 360-64.10.1016/j.scriptamat.2012.07.037 ↗
26. K.S. Han, T.J. Song and B.C. De Cooman: ISIJ Intern., 2013, vol. 53, pp. 294-303.10.2355/isijinternational.53.294 ↗
27. L. Li, W. Yang and Z. Sun: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2060-69.10.1007/s11661-012-1572-z ↗
28. A. Dehghan-Manshadi, M.R. Barnett and P.D. Hodgson: Mater. Sci. Technol., 2007, vol. 23, pp. 1478-84.10.1179/174328407X239019 ↗
29. R.Z. Wang and T.C. Lei: Scripta Metall. Mater., 1994, vol. 31, pp. 1193-96.10.1016/0956-716X(94)90575-4 ↗
30. P. Cizek, and B.P. Wynne: Mater. Sci. Eng. A, 1997, vol. 230, pp. 88–94.10.1016/S0921-5093(97)00087-7 ↗
31. O. Balancin, W.A.M. Hoffmann and J.J. Jonas: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1353-64.10.1007/s11661-000-0254-4 ↗
32. T. Maki, T. Furuhara and T. Tsuzaki: ISIJ Intern., 2001, vol. 41, pp. 571-79.10.2355/isijinternational.41.571 ↗
33. P. Cizek, B.P. Wynne and W.M. Rainforth: J. Microsc., 2006, vol. 222, pp. 85-96.10.1111/j.1365-2818.2006.01576.x ↗
34. S. Gourdet and F. Montheillet: Mater. Sci. Eng. A, 2000, vol. 283, pp. 274-88.10.1016/S0921-5093(00)00733-4 ↗
35. S. Gourdet and F. Montheillet: Acta Mater., 2003, vol. 51, pp. 2685-99.10.1016/S1359-6454(03)00078-8 ↗
36. G. Glover and C.M. Sellars: Metall. Trans., 1973, vol. 4, pp. 765-75.10.1007/BF02643086 ↗
37. N. Tsuji, Y. Matsubara and Y. Saito: Scripta Mater., 1997, vol. 37, pp. 477-84.10.1016/S1359-6462(97)00123-1 ↗
38. S.V.S.N. Murty, S. Torizuka, K. Nagai, T. Kitai and Y. Kogo: Scripta Mater., 2005, vol. 53, pp. 763-68.10.1016/j.scriptamat.2005.05.027 ↗
39. J-H. Kang and S. Torizuka: Scripta Mater., 2007, vol. 57, pp. 1048-51.10.1016/j.scriptamat.2007.07.039 ↗
40. R. Wang and T.C. Lei: Mater. Sci. Eng. A, 1993, vol. 165, pp. 19-27.10.1016/0921-5093(93)90622-L ↗
41. B. Verhaeghe, F. Louchet, B. Doisneau-Cottignies, Y. Bréchet and J.P. Massoud: Phil. Mag. A, 1997, vol. 76, pp. 1079-91.10.1080/01418619708200016 ↗
42. G. Martin: Hot Workability of Duplex Stainless Steels, PhD thesis, University of Grenoble, 2011.
43. H. Sieurin and R. Sandström: Mater. Sci. Eng. A, 2006, vol. 418, pp. 250-56.10.1016/j.msea.2005.11.025 ↗
44. N. Haghdadi, D. Abou-Ras, P. Cizek, P.D. Hodgson, A.D. Rollett, and H. Beladi: Mater. Letters, 2017, vol. 196, pp. 264–68.10.1016/j.matlet.2017.03.090 ↗
45. E. Werner, T. Siegmund and F.D. Fischer: Comput. Mater. Sci., 1994, vol. 3, pp. 279–85.10.1016/0927-0256(94)90142-2 ↗
46. F.J. Humphreys, P.S. Bate and P.J. Hurley: J. Microsc., 2001, vol. 201, pp. 50–58.10.1046/j.1365-2818.2001.00777.x ↗
47. D.G. Brandon: Acta Metall., 1966, vol. 14, pp. 1479–84.10.1016/0001-6160(66)90168-4 ↗
48. O. Engler and V. Randle: Introduction to Texture Analysis—Macrotexture, Microtexture and Orientation Mapping, second ed., CRC Press, New York, 2010.
49. P. Heilmann, W.A.T. Clark, and D.A. Rigney: Ultramicroscopy, 1982, vol. 9, pp. 365–71.10.1016/0304-3991(82)90097-3 ↗
50. D. Jorge-Badiola, A. Iza-Mendia and I. Gutierrez: Mater. Sci. Eng. A, 2005, vol. 394, pp. 445-54.10.1016/j.msea.2004.11.049 ↗
51. I.L. Dillamore, P.L. Morris, C.J.E. Smith and W.B. Hutchinson: Proc. R. Soc. Lond. A, 1972, vol. 329, pp. 405-20.10.1098/rspa.1972.0120 ↗
52. C.S. Lee and B.J. Duggan: Acta Metall. Mater., 1993, vol. 9, pp. 2691-99.10.1016/0956-7151(93)90138-I ↗
53. D. Raabe, Z. Zhao, S.-J. Park and F. Roters: Acta Mater., 2002, vol. 50, pp. 421-40.10.1016/S1359-6454(01)00323-8 ↗
54. A.S. Taylor, P. Cizek and P.D. Hodgson: Acta Mater., 2012, vol. 60, pp. 1548-69.10.1016/j.actamat.2011.11.048 ↗
55. D. Poddar, P. Cizek, H. Beladi and P.D. Hodgson: Acta Mater., 2015, vol. 99, pp. 347-62.10.1016/j.actamat.2015.08.003 ↗
56. D. Poddar, P. Cizek, H. Beladi and P.D. Hodgson: Metall. Mater. Trans. A, 2015, vol. 46, pp. 5933-51.10.1007/s11661-015-3182-z ↗
57. D. Poddar, P. Cizek, H. Beladi, P.D. Hodgson: Mater. Charact., 2016, vol. 118, pp. 382-96.10.1016/j.matchar.2016.06.015 ↗
58. B. Bay, N. Hansen, D.A. Hughes and D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1992, vol. 40, pp. 205-19.10.1016/0956-7151(92)90296-Q ↗
59. I. Gutierrez-Urrutia, D. Raabe: Scripta Mater., 2013, vol. 69, pp. 53-56.10.1016/j.scriptamat.2013.03.010 ↗
60. N. Afrin, M.Z. Quadir, W. Xu and M. Ferry: Acta Mater., 2012, vol. 60, pp. 6288-300.10.1016/j.actamat.2012.08.003 ↗
61. H.K.D.H. Bhadeshia: Bainite in Steels, Inst. of Metals, 1992.
62. R. Dakhlaoui, C. Braham, and A. Baczmański: J. Neutron Res., 2007, vol. 15, pp. 131–37.10.1080/10238160701372596 ↗
63. T.C. Lee, I.M. Robertson and K. Birnbaum: Metall. Trans. A, 1990, vol. 21A, pp. 2437–47.10.1007/BF02646988 ↗
64. I. Gutierrez-Urrutia, and D. Raabe: Acta Mater., 2012, vol. 60, pp. 5791–802.10.1016/j.actamat.2012.07.018 ↗
65. G.M. Le, A. Godfrey, C.S. Hong, X. Huang and G. Winther: Scripta Mater., 2012, vol. 66, pp. 359–62.10.1016/j.scriptamat.2011.11.034 ↗
66. C. Hong, X. Huang, and G. Winther: Philos. Mag., 2013, vol. 93, pp. 3118–41.10.1080/14786435.2013.805270 ↗
67. F.J. Humphreys, and P.S. Bate: Acta Mater., 2007, vol. 55, pp. 5630–45.10.1016/j.actamat.2007.06.032 ↗
68. A. Albou, J.H. Driver, and C. Maurice: Acta Mater., 2010, vol. 58, pp. 3022–34.10.1016/j.actamat.2010.01.034 ↗
69. B. Sun, H. Aydin, F. Fazeli, and S. Yue: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 1782–91.10.1007/s11661-016-3338-5 ↗