journal article·2017-04

Crack Growth Modeling and Life Prediction of Pipeline Steels Exposed to Near-Neutral pH Environments: Dissolution Crack Growth and Occurrence of Crack Dormancy in Stage I

Jiaxi Zhao, Weixing Chen, Mengshan Yu, Karina Chevil, Reg Eadie, Greg Van Boven, Richard Kania, Jenny Been, Sean Keane

Publisher page

Abstract

This investigation was initiated to provide governing equations for crack initiation, crack growth, and service life prediction of pipeline steels in near-neutral pH (NNpH) environments. This investigation has focused on the crack initiation and early-stage crack growth. The investigation considered a wide range of conditions that could lead to crack initiation, crack dormancy, and crack transition from a dormant state to active growth. It is concluded that premature rupture caused by stress cracking at a service life of about 20 to 30 years previously observed during field operation could take place only when the worst conditions responsible for crack initiation and growth have been realized concurrently at the site of rupture. This also explains the reason that over 95 pct of NNpH cracks remain harmless, while about 1 pct of them become a threat to the integrity of pipeline steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. National Energy Board: Public Inquiry Concerning Stress Corrosion Cracking on Canadian Oil and Gas Pipelines, National Energy board, November, 1996.
2. J.A. Beavers: Report prepared for the Gas Research Institute, GRI-7045, 2004.
3. J.A. Beavers, J.T. Johnson, and R.L. Sutherby: Proceedings of 3th International Pipeline Conference, vol. 2, Calgary, Canada, October 1–5, 2000, pp. 979–88.
4. CEPA: Stress Corrosion Cracking Recommended Practices, 2nd edn, CEPA, Calgary, 2007
5. P. L. Andresen and F. P. Ford: Mater. Sci. Eng. A., 1988, vol. 103 pp. 167-184.10.1016/0025-5416(88)90564-2 ↗
6. P. L. Andresen and F. P. Ford: Int. J. Pres. Ves. Pip., 1994, vol. 59, pp. 61-70.10.1016/0308-0161(94)90142-2 ↗
7. F.P. Ford, D.F. Taylor, P.L. Andresen, and R.G. Ballinger: EPRI Final Rep. NP-5064M, Electric Power Research Institute, 1987
8. W. Zheng, W. Revie, F.A. MacLeod, and O. Dinardo: Pipeline Research Council International (PRCI), Houston, USA, 2000, Category No. L51791E.
9. J. Been and R.L. Sutherby: NACE Northern Area Western Conference, Calgary, Canada, February 7–8, 2006.
10. W.X. Chen and R. L. Sutherby: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1260-1268.10.1007/s11661-007-9184-8 ↗
11. M.S. Yu: PhD thesis, University of Alberta, 2015.
12. W. X. Chen, F. King, and E. D. Vokes: Corrosion, 2002, vol. 58, pp. 267-275.10.5006/1.3279878 ↗
13. G. Van Boven, W.X. Chen and R. Rogge: Acta Mater., 2007, vol. 55, pp. 29-42.10.1016/j.actamat.2006.08.037 ↗
14. 14 W. X. Chen, G. Van Boven and R. Rogge: Acta Mater., 2007, vol.55, pp.43-53.10.1016/j.actamat.2006.07.021 ↗
15. D. He, T.R. Jach, F. King, and W.X. Chen: International Pipeline Conference, 2000, vol. 2, 2002, p. 997.
16. M. Elboujdaini, Y.Z. Wang, R.W. Revie, R.N. Parkins, and M.T. Shehata: Proceedings of Corrosion 2000. NACE, Houston, TX, 2000, Paper No. 00379.
17. W. X. Chen, S. H. Wang, R. Chu, F. King, T. R. Jack and R. R. Fessler: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2601-2608.10.1007/s11661-003-0019-y ↗
18. R. Chu, W.X. Chen, S.H. Wang, F. King, T.R. Jack, and R.R. Fessler: Corrosion 60:275–83 (2004)10.5006/1.3287732 ↗
19. T. Kushida, K. Nose, H. Asahi, M. Kimura, Y. Yamane, S. Endo, and H. Kawano: Proceedings of Corrosion 2001. NACE, Houston, TX, 2001, Paper No. 01223.
20. S. H. Wang, W. X. Chen, F. King, T. R. Jack and R. R. Fessier: Corrosion, 2002, vol. 58, pp. 526-534.10.5006/1.3277644 ↗
21. B. Y. Fang, R. L. Eadie, W. X. Chen and M. Elboujdaini: Corros. Eng. Sci. Tech., 2009, vol. 44, pp. 32-42.10.1179/174327808X286239 ↗
22. 22 B.Y. Fang, R. L. Eadie, W. X. Chen and M. Elboujdaini: Corros. Eng. Sci. Tech., 2010, vol. 45, pp. 302-312.10.1179/147842208X386304 ↗
23. Z. Qin, B. Demko, J. Noel, D. Shoesmith, F. King, R. Worthingham and K. Keith: Corrosion, 2004, vol. 60, pp. 906-914.10.5006/1.3287824 ↗
24. W. X. Chen, R. Kania, R. Worthingham and G. Van Boven: Acta Mater., 2009, vol. 59, pp. 6200-6214.10.1016/j.actamat.2009.08.047 ↗
25. A. Egbewande, W. X. Chen, R. Eadie, R. Kania, G. Van Boven, R. Worthingham and J. Been: Corros. Sci., 2014, vol. 83, pp. 343-354.10.1016/j.corsci.2014.02.032 ↗
26. K. Chevil: Master Thesis, University of Alberta
27. J.X. Zhao, W.X. Chen, M.S. Yu, K. Chevil, R. Eadie, J. Been, G. Van Boven, R. Kania, and S. Keane: Metall. Mater. Trans. A. unpublished data.
28. M. S. Yu, W. X. Chen, R. Kania, G. Van Boven and J. Been: Fatigue Fract. Eng. Mater. Struct., 2015, vol. 38, pp. 681-692.10.1111/ffe.12274 ↗
29. M.S. Yu, X. Xing, H. Zhang, J.X. Zhao, R. Eadie, W.X. Chen, J. Been, G. Van Boven and R. Kania: Acta Mater., 2015, vol. 96, pp. 159-169.10.1016/j.actamat.2015.05.049 ↗
30. Y. W. Kang, W. X. Chen, R. Kania, G. Van Boven and R. Worthingham: Corros. Sci., 2011, vol. 53, pp. 968-975.10.1016/j.corsci.2010.11.029 ↗
31. P.J. Bouchard: Encyclopedia of Materials Science and Technology, IV: Structural Phenomena, K.H.J. Buschow et al., eds., Elsevier, Oxford, Pergamon, 2001, pp. 8134–42.10.1016/B0-08-043152-6/01459-5 ↗
32. E.B. Delanty and J. O’Beirne: Oil Gas J., 1992, vol. 90, pp. 39–45.