Study on the Mechanical Properties of Heat-Treated Electroless NiP Coatings Reinforced with Al2O3 Nano Particles
Source abstract
Abstract
This work reports the effects of electroless co-deposition of Al2O3 nanoparticles and NiP to obtain a NiP-Al2O3 coating on the structure and mechanical properties of the composite coatings. The effects of annealing heat treatments at 373 K, 473 K, 573 K, and 673 K (100 °C, 200 °C, 300 °C, and 400 °C) on the structure and properties of the coatings were evaluated. The as-deposited coatings are a mixture of crystalline and amorphous phases that tend to crystallize during heat treatment. Heat treatment at higher temperatures causes the precipitation of the Ni3P phase. The mechanical properties of as-deposited and heat-treated NiP-Al2O3 coatings were evaluated using depth-sensing indentation tests performed at loads of 200 mN. The incorporation of Al2O3 nanoparticles induces strengthening of the NiP coating by dispersion. Heat treatment of the NiP-Al2O3 coatings induced crystallization of the amorphous phase with the formation of nanosized grains and the precipitation of Ni3P. Consequently, there is an increase in the hardness and Young’s modulus of the coatings to 15.4 ± 0.5 and 227 ± 2.8 GPa, respectively, in a combined hardening effect induced by dispersion of the Al2O3 nanoparticles and crystallization and precipitation during heat treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Metal and Thin Film Mechanics · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. A. Brenner and G.E. Riddell: J. Res. Natl. Bur. Stand. (US), 1946, vol. 37, pp. 31-34.10.6028/jres.037.019 ↗
2. L.L. Wang, H.J. Chen and Z.L. Chen: Surf. Eng., 2011, vol. 27 (1), pp. 57-60.10.1179/026708410X12550773058108 ↗
3. C.E. Johnson: Metal Finishing, 1980, vol. 78, pp. 21-24.
4. R. Agarwala and V. Agarwala: Sadhana, 2003, vol. 28 (3-4), pp. 475–93.10.1007/BF02706445 ↗
5. R. Parkinson, Nickel Development Institute Technical Series no. 10081, Canada, 1995.
6. M. Mohammadi and M. Ghorbani: J. Coat. Technol. Res., 2011, vol. 8 (4), pp. 527-533.10.1007/s11998-011-9329-y ↗
7. M. Mohammadi, M. Ghorbani and A. Azizi: J. Coat. Techn. Res., 2010, vol. 7 (6), pp. 697-702.10.1007/s11998-010-9255-4 ↗
8. I. Apachitei, J. Duszczyk, L. Katgerman and P.J.B. Overkamp: Scripta Mater., 1998, vol. 38 (9), pp. 1383-1389.10.1016/S1359-6462(98)00053-0 ↗
9. V.V.N. Reddy, B. Ramamoorthy and P.K. Nair: Wear, 2000, vol. 239 (1), pp. 111-116.10.1016/S0043-1648(00)00330-6 ↗
10. B. Müller and H. Ferkel: Nanostr. Mater., 1998, vol. 10 (8), pp. 1285-1288.10.1016/S0965-9773(99)00008-2 ↗
11. Y. de Hazan, D. Werner, M. Zgraggen, M. Groteklaes and T. Graule: J. Colloid Interf. Sci., 2008, vol. 328, pp. 103-109.10.1016/j.jcis.2008.08.033 ↗
12. J.N. Balaraju, Kalavati and K.S. Rajam: Surf. Coat. Technol., 2006, vol. 200 (12-13), pp. 3933-3941.10.1016/j.surfcoat.2005.03.007 ↗
13. X.T. Yuan, Z.Q. Hua, L. Wang, D.B. Sun and S.L. Chen: Appl. Mech. Mater., 2011, vol. 66-68, pp. 1668-1675.10.4028/www.scientific.net/AMM.66-68.1668 ↗
14. D. Liu, Y. Yan, K. Lee and J. Yu: Mater. Corr., 2009, vol. 60 (9), pp. 690-694.10.1002/maco.200805170 ↗
15. K.G. Keong, W. Sha and S. Malinov: Surf. Coat. Techn., 2003, vol. 168 (2-3), pp. 263-274.10.1016/S0257-8972(03)00209-3 ↗
16. B.D. Cullity and S.R. Stock: Elements of X-Ray Diffraction: Pearson New International Edition, Pearson Education, Ltd, 2013.
17. A.C. Fischer-Cripps: Vacuum, 2000, vol. 58 (4), pp. 569-585.10.1016/S0042-207X(00)00377-8 ↗
18. A.C. Fischer-Cripps: Nanoindentation, 3rd edition ed., Springer Science+Business Media, LLC, 2011.10.1007/978-1-4419-9872-9 ↗
19. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7 (6), pp. 1564-1583.10.1557/JMR.1992.1564 ↗
20. H.-S. Yu, S.-F. Luo and Y.-R. Wang: Surf. Coat. Techn., 2001, vol. 148 (1-2), pp. 143-148.10.1016/S0257-8972(01)01345-7 ↗
21. P.S. Kumar and P.K. Nair: J. Mater. Proc. Technol., 1996, vol. 56 (1-4), pp. 511-520.10.1016/0924-0136(96)85110-7 ↗
22. J.N. Balaraju, T.S.N.S. Narayanan and S.K. Seshadri: Mater. Res. Bull., 2006, vol. 41 (4), pp. 847-860.10.1016/j.materresbull.2005.09.024 ↗
23. S. Alirezaei, S.M. Monirvaghefi, M. Salehi and A. Saatchi: Surf. Coat. Technol., 2004, vol. 184 (2-3), pp. 170-175.10.1016/j.surfcoat.2003.11.013 ↗
24. M.F. Doerner and W.D. Nix: J. Mater. Res., 1986, vol. 1 (4), pp. 601-09.10.1557/JMR.1986.0601 ↗
25. E2546-07: ASTM International, 2007.
26. S. Alirezaei, S.M. Vaghefi, M. Ürgen, A. Saatchi and K. Kazmanli: J. Comp. Mater., 2013, vol. 47 (26), pp. 3323-29.10.1177/0021998312464082 ↗
27. F. Hou, W. Wang and H. Guo: Appl. Surf. Sci., 2006, vol. 252 (10), pp. 3812-3817.10.1016/j.apsusc.2005.05.076 ↗
28. G.-H. Zhou, H.-Y. Ding, F. Zhou and Y. Zhang: J. Iron Steel Res. Int., 2008, vol. 15 (1), pp. 65-69.10.1016/S1006-706X(08)60014-X ↗
29. I. Apachitei, F.D. Tichelaar, J. Duszczyk and L. Katgerman: Surf. Coat. Techn., 2002, vol. 149 (2-3), pp. 263-78.10.1016/S0257-8972(01)01492-X ↗
30. G.J. Fan, H. Choo, P.K. Liaw and E.J. Lavernia: Mater. Sci. Eng. A, 2005, vol. 409 (1-2), pp. 243-48.10.1016/j.msea.2005.06.073 ↗
31. A.H. Chokshi, A. Rosen, J. Karch and H. Gleiter: Scripta Metall., 1989, vol. 23 (10), pp. 1679-83.10.1016/0036-9748(89)90342-6 ↗
32. R. Weil and K. Parker: in Electroless Plating-Fundamentals and Applications, G.O. Mallory and J.B. Hadju, eds., William Andrew Publishing, Orlando, 1990, pp. 111–37.
33. R.A. Shakoor, R. Kahraman, U. Waware, Y. Wang and W. Gao: Mater. & Design, 2014, vol. 64, pp. 127-135.10.1016/j.matdes.2014.07.026 ↗
34. H. Wang, P. Shi, H. Yu and B. Xu: Phys. Procedia, 2013, vol. 50, pp. 225-30.10.1016/j.phpro.2013.11.036 ↗
35. V.D. Papachristos, C.N. Panagopoulos, L.W. Christoffersen and A. Markaki: Thin Solid Films, 2001, vol. 396, pp. 173-82.10.1016/S0040-6090(01)01223-8 ↗