journal article·2008-10

Deformation-Induced Transformation of Retained Austenite in Transformation Induced Plasticity-Aided Steels: A Thermodynamic Model

Monideepa Mukherjee, Shiv Brat Singh, Omkar Nath Mohanty

Publisher page

Abstract

A model based on thermodynamics of deformation-induced transformation of retained austenite to martensite has been developed, so that the amount of martensite or the amount of austenite left untransformed after a certain amount of strain can be predicted. The model takes into account the mechanical driving force or the energy contribution of the deformation strain, which has been determined empirically from reported experimental data. The model was used to predict the volume fraction of untransformed austenite as a function of strain for a wide range of alloys. The predictions were reasonably accurate in most of the cases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. V.F. Zackay, E.R. Parker, D. Fahr, R. Busch: Trans. ASM, 1967, vol. 60, pp. 252–59
2. O. Matsumura, Y. Sakuma, H. Takechi: Trans. ISIJ, 1987, vol. 21, pp. 570–7910.2355/isijinternational1966.27.570 ↗
3. K. Sugimoto, M. Kobayashi, S. Hashimoto: Metall. Trans. A, 1992, vol. 23A, pp. 3085–9110.1007/BF02646127 ↗
4. K. Sugimoto, T. Iida, J. Sakaguchi, T. Kashima: ISIJ Int., 2000, vol. 40, pp. 902–0810.2355/isijinternational.40.902 ↗
5. K. Sugimoto, A. Kanda, R. Kikuchi, S. Hashimoto, T. Kashima, and S. Ikeda: ISIJ Int. 2002, vol. 42, pp. 910–1510.2355/isijinternational.42.910 ↗
6. M. Mukherjee, O.N. Mohanty, S. Hashimoto, T. Hojo, K. Sugimoto: ISIJ Int., 2006, vol. 46, pp. 316–2410.2355/isijinternational.46.316 ↗
7. G.B. Olson, M. Cohen: Metall. Trans. A, 1975, vol. 6A, pp. 791–9510.1007/BF02672301 ↗
8. H.C. Shin, T.K. Ha, Y.W. Chang: Scripta Mater., 2001, vol. 45, pp. 823–2910.1016/S1359-6462(01)01101-0 ↗
9. T. Angel: JISI, 1954, vol. 177, pp. 165–74
10. D.C. Ludwigson, J.A. Berger: JISI, 1969, vol. 192, pp. 63–69
11. O. Matsumura, Y. Sakuma, H. Takechi: Scripta Mater., 1987, vol. 21, pp. 1301–0610.1016/0036-9748(87)90103-7 ↗
12. M.Y. Sherif, C. Garcia-Mateo, T. Sourmail, H.K.D.H. Bhadeshia: Mater. Sci Technol., 2004, vol. 20, pp. 319–2210.1179/026708304225011180 ↗
13. M. Mukherjee, S.B. Singh, O.N. Mohanty: Mater. Sci. Eng. A, 2006, vol. 434, pp. 237–4510.1016/j.msea.2006.06.076 ↗
14. M. Mukherjee, S.B. Singh, O.N. Mohanty: Mater. Sci. Technol., 2007, vol. 23, pp. 338–4610.1179/174328407X161150 ↗
15. J.W. Christian: ICOMAT 79, Int. Conf. Martensitic Transformations, Cambridge, MA, 1979, pp. 220–34
16. C.M. Wayman, H.K.D.H. Bhadeshia: in Physical Metallurgy, R.W. Cahn, P. Hassen, eds., Elsevier Science Publishers, Amsterdam, 1996, pp. 1507–5410.1016/B978-044489875-3/50021-1 ↗
17. M. Cohen, E.S. Machlin, V.G. Paranjpe: Thermodyamics in Physical Metallurgy, ASM, Cleveland, OH, 1950, pp. 242–70
18. J.R. Patel, M. Cohen: Acta Metall., 1953, vol. 1, pp. 531–3810.1016/0001-6160(53)90083-2 ↗
19. G.B. Olson, M. Cohen: Metall. Trans. A, 1982, vol. 13A, pp. 1907–1410.1007/BF02645934 ↗
20. G.B. Olson, M. Azrin: Metall. Trans. A, 1978, vol. 9A, pp. 713–2110.1007/BF02659928 ↗
21. G.B. Olson, M. Cohen: J. Less Common Met., 1972, vol. 28, pp. 107–1810.1016/0022-5088(72)90173-7 ↗
22. G.F. Bolling, R.H. Richman: Acta Metall., 1970, vol. 18, pp. 673–8110.1016/0001-6160(70)90097-0 ↗
23. B. Sundman, B. Jansson, J.O. Andersson: Calphad, 1985, vol. 9, pp. 153–9010.1016/0364-5916(85)90021-5 ↗
24. G.R. Speich, V.A. Demarest, R.L. Miller: Metall. Trans. A, 1981, vol. 12A, pp. 1419–2810.1007/BF02643686 ↗
25. M. De Meyer, D. Vanderschueren, and B.C. De Cooman: Proc. 41st Mechanical Working and Steel Processing Conf., Iron and Steel Society, Baltimore, MD, 1999, pp. 265–76
26. M. Takahashi, H.K.D.H. Bhadeshia: Trans. Jpn. Inst. Met., 1991, vol. 32, pp. 689–96
27. K. Sugimoto, M. Misu, M. Kobayashi, H. Shirasawa: ISIJ Int., 1993, vol. 33, pp. 775–8210.2355/isijinternational.33.775 ↗
28. P.J. Jacques, J. Ladrière, F. Delannay: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2759–6810.1007/s11661-001-1027-4 ↗
29. D. Krizan, B.C. De Cooman, and J. Antonissen: Proc. Int. Conf. on Advanced High Strength Sheet Steels for Automotive Applications, AIST, Winter Park, CO, 2004, pp. 205–16
30. A.K. De, R.S. Kircher, J.G. Speer, and D.K. Matlock: Proc. Int. Conf. on Advanced High Strength Sheet Steels for Automotive Applications, AIST, Winter Park, CO, 2004, pp. 337–47
31. M. Radu, J. Valy, A.F. Gourgues, F. Le Strat, A. Pineau: Scripta Mater., 2005, vol. 52, pp. 525–3010.1016/j.scriptamat.2004.10.034 ↗
32. K.W. Andrews: JISI, 1965, vol. 203, pp. 721–27
33. B.D. Cullity: Elements of X-Ray Diffraction, 2nd ed., Addison-Wesley Publishing Co., Inc., Reading, MA, 1978, pp. 411–15
34. G. Ghosh, V. Raghavan: Mater. Sci. Eng., 1986, vol. 79, pp. 223–3110.1016/0025-5416(86)90407-6 ↗
35. J. Mahieu, D. Van Dooren, and B.C. De Cooman: in Proc. Int. Symp. on Transformation and Deformation Mechanisms in Advanced High Strength Steels, M. Militzer, W.J. Poole, and E. Essadiqi, eds., CIM, Montreal, 2003, pp. 21–35
36. A. Itami, M. Takahashi, K. Ushioda: ISIJ Int. 1995, vol. 35, pp. 1121–2710.2355/isijinternational.35.1121 ↗
37. P.J. Jacques: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 259–6510.1016/j.cossms.2004.09.006 ↗
38. J. Wang, S. van der Zwaag: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1527–3910.1007/s11661-001-0240-5 ↗