Corrosion and Fretting Corrosion Studies of Medical Grade CoCrMo Alloy in a Clinically Relevant Simulated Body Fluid Environment
Source abstract
Abstract
In modular hip implants, fretting corrosion at the head/neck and neck/stem interfaces has been identified as a major cause of early revision in hip implants, particularly those with heads larger than 32 mm. It has been found that the type of fluid used to simulate the fretting corrosion of biomedical materials is crucial for the reliability of laboratory tests. Therefore, to properly understand and effectively design against fretting corrosion damage in modular hips, there is the need to replicate the human body environment as closely as possible during in vitro testing. In this work, corrosion and fretting corrosion behavior of CoCrMo in 0.14 M NaCl, phosphate buffered saline, and in a clinically relevant novel simulated body fluid was studied using a variety of electrochemical characterization techniques and tribological experiments. Electrochemical, spectroscopy and tribo-electrochemical techniques employed include Potentiodynamic polarization, Potentiostatic polarization, Electrochemical impedance spectroscopy, X-ray photoelectron spectroscopy, augur electron spectroscopy, inductively coupled plasma mass spectroscopy, and pin-on-disk wear simulation. The presence of phosphate ions in PBS accounted for the higher corrosion rate when compared with 0.14 M NaCl and the clinically relevant novel simulated body fluid. The low corrosion rates and the nature of the protective passive film formed in the clinically relevant simulated body fluid make it suitable for future corrosion and fretting corrosion studies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Hydrogen embrittlement and corrosion behaviors in metals · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. S. R. Knight, R. Aujla, and S. P. Biswas: Orthop. Rev. 2011, vol. 3, pp. 2–4.10.4081/or.2011.e16 ↗
2. R. A. Antunes and M. C. L. de Oliveira: Acta Biomater., vol. 8, no. 3, pp. 937–62, Mar. 2012.10.1016/j.actbio.2011.09.012 ↗
3. H. Matusiewicz: Acta Biomater., 2014, vol. 10, No. 6, pp. 2379–03.10.1016/j.actbio.2014.02.027 ↗
4. M. Metikos-Huković, Z. Pilić, R. Babić, and D. Omanović, Acta Biomater., vol. 2, no. 6, pp. 693–700, Nov. 2006.10.1016/j.actbio.2006.06.002 ↗
5. R. Pourzal, I. Catelas, R. Theissmann, C. Kaddick, and A. Fischer: Wear, 2011, vol. 271, no. 9–10, pp. 1658–66.10.1016/j.wear.2010.12.045 ↗
6. C. V. Vidal and A. I. Muñoz, Electrochim. Acta, vol. 54, no. 6, pp. 1798–09, Feb. 2009.10.1016/j.electacta.2008.10.018 ↗
7. F. Contu, B. Elsener, and H. Böhni, Corros. Sci., 2005, vol. 47, no. 8, pp. 1863–75.10.1016/j.corsci.2004.09.003 ↗
8. C. Valero Vidal and A. Igual Muñoz: Electrochim. Acta, 2011, vol. 56, no. 24, pp. 8239–48.10.1016/j.electacta.2011.06.068 ↗
9. A. Ouerd, C. Alemany-Dumont, B. Normand, and S. Szunerits, Electrochim. Acta, 2008, vol. 53, no. 13, pp. 4461–4469.10.1016/j.electacta.2008.01.025 ↗
10. A. I. Muñoz and S. Mischler, J. Electrochem. Soc., vol. 154, no. 10, p. C562, 2007.10.1149/1.2764238 ↗
11. R. Sonntag, J. Reinders, and J. P. Kretzer, Acta Biomater., vol. 8, no. 7, pp. 2434–41, Jul. 2012.10.1016/j.actbio.2012.03.029 ↗
12. M. Haeri and J. L. Gilbert, Acta Biomater., vol. 9, no. 11, pp. 9220–28, 2013.10.1016/j.actbio.2013.06.040 ↗
13. Y. Yan, A. Neville, and D. Dowson, Wear, vol. 263, no. 7–12, pp. 1105–1111, 2007.10.1016/j.wear.2007.01.114 ↗
14. C. ValeroVidal and A. IgualMuñoz: Corros. Sci., 2008, vol. 50, no. 7, pp. 1954–1961.10.1016/j.corsci.2008.04.002 ↗
15. S. Virtanen, I. Milosev, E. Gomez-Barrena, R. Trebse, J. Salo, and Y. T. Konttinen, Acta Biomater., vol. 4, no. 3, pp. 468–76, 2008.10.1016/j.actbio.2007.12.003 ↗
16. N. Diomidis, S. Mischler, N. S. More, and M. Roy, Acta Biomater., vol. 8, no. 2, pp. 852–9, 2012.10.1016/j.actbio.2011.09.034 ↗
17. M. Huber, G. Reinisch, G. Trettenhahn, K. Zweymüller, and F. Lintner:Acta Biomater., vol. 5, no. 1, pp. 172–80, 2009.10.1016/j.actbio.2008.07.032 ↗
18. L.E.S. Wong: The Effect of Lubricant Composition on the Wear Behaviour of Polyethylene for Orthopaedic Applications, University of Manitoba, 2013.
19. J.-M. Brandt, L. K. Brière, J. Marr, S. J. MacDonald, R. B. Bourne, and J. B. Medley: J. Biomed. Mater. Res. A, vol. 94, no. 3, pp. 961–71, 2010.10.1002/jbm.a.32728 ↗
20. J. Brandt: Wear and Boundary Lubrication in Modular Total Knee Replacements, University of Waterloo, 2008.
21. L.E. Guenther, B.W. Pyle, T.R. Turgeon, E.R. Bohm, U.P. Wyss, T.A. Schmidt, and J.-M. Brandt: Proc. Inst. Mech. Eng. H., 2014, vol. 228, no. 2, pp. 127–39.10.1177/0954411913517880 ↗
22. A. C. Lewis and P. J. Heard: J. Biomed. Mater. Res. A, vol. 75, no. 2, pp. 365–73, 2005.10.1002/jbm.a.30430 ↗
23. A. Igual Muñoz and L. Casabán Julián: Electrochim. Acta, 2010, vol. 55, no. 19, pp. 5428–39.10.1016/j.electacta.2010.04.093 ↗
24. A. W. E. Hodgson, S. Kurz, S. Virtanen, V. Fervel, C.-O. A. Olsson, and S. Mischler: Electrochim. Acta, vol. 49, no. 13, pp. 2167–78, 2004.10.1016/j.electacta.2003.12.043 ↗
25. A.J. Hart, P.D. Quinn, B. Sampson, A. Sandison, K.D. Atkinson, J.A. Skinner, J.J. Powell, and J.F.W. Mosselmans: Acta Biomater., 2010, vol. 6, no. 11, pp. 4439–46.10.1016/j.actbio.2010.06.006 ↗
26. J. Hesketh, X. Hu, Y. Yan, D. Dowson, and A. Neville, “Biotribocorrosion: Some electrochemical observations from an instrumented hip joint simulator,” Tribol. Int., vol. 59, pp. 332–338, Mar. 2013.10.1016/j.triboint.2012.05.028 ↗
27. Y. Yan, A. Neville, D. Dowson, S. Williams, and J. Fisher: Wear, 2009, vol. 267, no. 5–8, pp. 683–688.10.1016/j.wear.2008.12.110 ↗
28. D. Dowson and Z.-M. Jin, “Metal-on-metal hip joint tribology,” Proc. Inst. Mech. Eng. Part H J. Eng. Med., vol. 220, no. 2, pp. 107–118, Jan. 2006.10.1243/095441105X69114 ↗
29. C.V. Vidal and A.I. Muñoz: Electrochim. Acta, 2010, vol. 55, no. 28, pp. 8445–52.10.1016/j.electacta.2010.07.028 ↗
30. P. E. Sinnett-Jones, J. A. Wharton, and R. J. K. Wood: Wear, vol. 259, no. 7–12, pp. 898–909, Jul. 2005.10.1016/j.wear.2005.02.045 ↗
31. R. Büscher and A. Fischer: Wear, vol. 259, no. 7–12, pp. 887–897, 2005.10.1016/j.wear.2005.02.036 ↗
32. R. Pourzal, R. Theissmann, S. Williams, B. Gleising, J. Fisher, and A. Fischer, J. Mech. Behav. Biomed. Mater., vol. 2, no. 2, pp. 186–91, 2009.10.1016/j.jmbbm.2008.08.002 ↗
33. M. Baxmann, S. Y. Jauch, C. Schilling, W. Blömer, T. M. Grupp, and M. M. Morlock: Med. Eng. Phys., 2013, vol. 35, no. 5, pp. 676–83, discussion 676.10.1016/j.medengphy.2012.07.013 ↗
34. D. Shakhvorostov, B. Gleising, R. Büscher, W. Dudzinski, A. Fischer, and M. Scherge: Wear, vol. 263, no. 7–12, pp. 1259–1265, 2007.10.1016/j.wear.2007.01.127 ↗
35. M. T. Mathew, J. J. Jacobs, and M. A. Wimmer: Clin. Orthop. Relat. Res., vol. 470, no. 11, pp. 3109–17, 2012.10.1007/s11999-012-2563-5 ↗
36. R. Pourzal, R. Theissmann, M. Morlock, and A. Fischer: Wear, 2009, vol. 267, pp. 689–94.10.1016/j.wear.2009.01.012 ↗
37. G. Thorwarth, C. V Falub, U. Müller, B. Weisse, C. Voisard, M. Tobler, and R. Hauert: Acta Biomater., 2010, vol. 6, no. 6, pp. 2335–41.10.1016/j.actbio.2009.12.019 ↗
38. A. Fischer, Comput. Mater. Sci., vol. 46, no. 3, pp. 586–590, Sep. 2009.10.1016/j.commatsci.2009.01.016 ↗
39. M. Scherge, J. M. Martin, and K. Pöhlmann: Wear, vol. 260, no. 4–5, pp. 458–461, 2006.10.1016/j.wear.2005.03.025 ↗
40. M. Scherge: Wear, 2006, vol. 260, pp. 433–437.10.1016/j.wear.2005.03.025 ↗
41. F. Billi, S. N. Sangiorgio, S. Aust, and E. Ebramzadeh: J. Biomech., vol. 43, no. 7, pp. 1310–15, 2010.10.1016/j.jbiomech.2010.01.015 ↗
42. I. Leslie, S. Williams, C. Brown, G. Isaac, Z. Jin, E. Ingham, and J. Fisher, J. Biomed. Mater. Res. B. Appl. Biomater., vol. 87, no. 1, pp. 163–72, 2008.10.1002/jbm.b.31087 ↗
43. A. Fischer, S. Weiss, and M. A. Wimmer: J. Mech. Behav. Biomed. Mater., vol. 9, pp. 50–62, 2012.10.1016/j.jmbbm.2012.01.007 ↗