journal article·2007-04

Dwell Fatigue Microstructure in a Near-α Titanium Alloy

X. Wang, P. Vo, M. Jahazi, S. Yue

Publisher page

Abstract

The dwell fatigue microstructure of a near-α titanium alloy was studied by optical microscopy and transmission electron microscopy. Optical microscopy revealed primary α grains as being crack initiation sites. The majority of the cracks nucleated on and propagated along specific crystal planes in the primary α grains perpendicular to the α platelets in their neighboring transformed β grains. The propagation of the cracks is effectively blocked by α platelets with axes parallel to the directions of crack in the transformed β grains. Transmission electron microscopy revealed the formation of different types of slip bands across α platelet boundaries in transformed β grains and dislocation networks and subgrain boundaries in primary α grains. The most active slip system was identified as the type dislocation, which slips on the basal planes of α phase. Slip bands in transformed β grains were found to be on the basal planes of the α colonies, perpendicular to the α platelets. The retained β phase at the α platelet boundaries have limited effect on blocking the propagation of the slip bands. The dwell effects are explained in terms of the dislocation movement in relation to the crystallography of the primary α grains and α platelets in the transformed β grains.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Hydrogen embrittlement and corrosion behaviors in metals · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Neal D.F. (1985) In: Jutjering G., Zwicker U., Bunk W. (Eds) Titanium Science and Technology. Deutsche Gesellschaft fur Metallkunde e.V., Oberursel, Germany, pp. 2419–24.
2. Blenkinsop P.A. (1993) In: Froes F.H., Caolan I. (Eds) Titanium ’92 Science and Technology. TMS, Warrendale, PA, pp. 15–26
3. R.R. Boyer: Mater. Sci. Eng. A, 1996, vol. 213A, pp. 103–1410.1016/0921-5093(96)10233-1 ↗
4. M.R. Bache, M. Cope, H.M. Davies, W.J. Evans, G. Harrison: Int. J. Fatigue, 1997, 19 (1):S83–S8810.1016/S0142-1123(97)00020-0 ↗
5. C. Ramachandra, A.K. Singh, G.M.K. Sarma: Metall. Trans. A, 1993, 24A:1273–8010.1007/BF02668196 ↗
6. C.G. Rhodes, N.E. Paton: Metall. Trans. A, 1979, 10A:209–1610.1007/BF02817630 ↗
7. D. Banerjee, J.E. Allison, F.H. Froes, and J.C. Williams: in Titanium Science and Technology, G. Lutjering, U. Zwicker, and W. Bunk, eds., Deutsche Gesellschaft fur Metallkunde e.V., Oberursel, Germany, 1985, pp. 1519–26
8. Issac G.H., Hammond C. (1985) In: Lutjering G., Zwicker U., Bunk W. (Eds) Titanium Science and Technology. Deutsche Gesellschaft fur Metallkunde e.V., Oberursel, Germany, pp. 1605–12
9. M.R. Bacher: Int. J. Fatigue, 2003, 25:1079–8710.1016/S0142-1123(03)00145-2 ↗
10. P. Pugh: The Magic of a Name, the Rolls-Royce Story, vol. 2, The Power Behind the Jet 1945–1987, Icon Books, Cambridge, United Kingdom, 2000, 344 pp
11. Woodfield A.P., Gorman M.D., Sutliff J.A., Corderman R.R. (1999) In: Boyer R.R., Eylon D., Lutjering G. (Eds) Fatigue Behavior of Titanium Alloys. TMS-AIME, Warrendale, PA, pp. 111–18
12. G.J. Baxter, W.M. Rainforth, L. Grabowsky: Acta Mater., 1996, 44:3453–6310.1016/1359-6454(96)00024-9 ↗
13. Z. Song, D.W. Hoeppner: Int. J. Fatigue, 1989, 11:85–9010.1016/0142-1123(89)90002-9 ↗
14. W.J. Evans: Mater. Sci. Eng. A, 1998, 243A:89–9610.1016/S0921-5093(97)00784-3 ↗
15. W.J. Evans, M.R. Bache: Int. J. Fatigue, 1994, 16:443–5210.1016/0142-1123(94)90194-5 ↗
16. S. Hardt, H.J. Maier, H.-J. Christ: Int. J. Fatigue, 1999, 21:779–8910.1016/S0142-1123(99)00042-0 ↗
17. R.J. Wilson, V. Randle, W.J. Evans: Phil. Mag. A, 1997, 76A:471–8010.1080/01418619708209986 ↗
18. M.L. Thomsen and D.W. Hoeppner: FAA/NASA Int. Symp Advanced Structural Integrity Methods for Airframe Durability and Damage Tolerance, Nasa Langley Research Center, Hampton, VA, 1994, pp. 871–89
19. W.D. Zeng, Y.G. Zhou: Mater. Sci. Eng. A, 2000, 290A:33–3810.1016/S0921-5093(00)00941-2 ↗
20. J.W. Edington: Practical Electron Microscopy in Materials Science, Van Nostrand Reinhold Co., New York, NY, 1976
21. H.M. Flower: Mater. Sci. Technol., 1990, 6:1082–9210.1179/mst.1990.6.11.1082 ↗
22. F.J. Humphreys, and M. Hatherly: in Recrystallization and Related Annealing Phenomena, Elsevier Science Ltd., Tarrytown, NY, 1995, 488 pp10.1016/B978-0-08-041884-1.50017-9 ↗
23. D.F. Neal, and S.P. Fox: in Titanium ’92 Science and Technology, F.H. Froes, I. Caplan, eds., TMS, Warrendale, PA, 1993, pp. 287–94
24. W.T. Donlon, J.E. Allison, and J.V. Lasecki: in Titanium ’92 Science and Technology, F.H. Froes and I. Cap lan, eds., TMS, Warrendale, PA, 1993, pp. 295–302
25. J.L. Murray: Phase Diagrams of Binary Titanium Alloys, ASM INTERNATIONAL, Metals Park, OH, 1987
26. C. Ramachandra and V. Singh: Metall. Trans. A, 1982, vol. 13A, pp. 771–7510.1007/BF02642390 ↗
27. W.G. Burgers: Physica (Utrecht), 1934, pp. 561–8610.1016/S0031-8914(34)80244-3 ↗
28. J.C. Williams: Proc. Conf. Titanium Science and Technology, R.I. Jaffee and H.M. Burte, eds., Plenum Press, New York, NY, 1973, vol. 3, pp. 1433–94
29. F.S. Lin, E.A. Starke Jr., S.B. Chakrabortty, A. Gysler: Metall. Trans. A, 1984, 15A:1229–4610.1007/BF02644717 ↗
30. A. Ambard, L. Guetaz, F. Louchet, D. Guichard: Mater. Sci. Eng., 2001, 319A–321A:404–0810.1016/S0921-5093(00)02003-7 ↗
31. J. White, M.H. Loretto, R.E. Smallman, and M.R. Winstone: Proc. 5th World Conf. on Titanium, G. Lutjering, U. Zwicker, and W. Bunk, eds., Deutsche Gesellschaft fur Metallkunde e.V., Oberursel, Germany, 1985, vol. IV, pp. 2297–2304
32. A.P. Woodfield, P.J. Postans, M.H. Loretto, R.E. Smallman: Acta Metall., 1988, 36:507–1510.1016/0001-6160(88)90082-X ↗
33. P.G. Partridge: Metall. Rev., 1967, 1:169–9410.1179/imr.1967.12.1.169 ↗
34. H. Renner, H. Kestler, and H. Mughrabi: in Fatigue '96, G. Lutjering and H. Nowack, eds., Elsevier Applied Science, London, 1996, vol. II, pp. 935–4010.1016/B978-008042268-8/50033-2 ↗
35. A. Gysler, S. Weissmann: Mater. Sci. Eng., 1977, 27:181–9310.1016/0025-5416(77)90169-0 ↗
36. G. Lutjering, S. Weissmann: Acta Metall., 1970, 18:785–9510.1016/0001-6160(70)90043-X ↗
37. S. Farenc, D. Caillard, A. Couret: Acta Metall. Mater., 1993, 41:2701–0910.1016/0956-7151(93)90139-J ↗
38. A. Kelly, G.W. Groves, P. Kidd 2000 Crystallography and Crystal Defects. John Wiley & Sons, New York, NY
39. T.R. Bieler, S.L. Semiatin: Int. J. Plast., 2002, 18:1165–8910.1016/S0749-6419(01)00057-2 ↗
40. J.C. Williams, R.G. Baggerly, N.E. Paton: Metall. Mater. Trans. A, 2002, 33A:837–5010.1007/s11661-002-0153-y ↗
41. G. Lutjering and J.C. Williams: Titanium, Springer, New York, NY, 2003