journal article·2015-05

Cooling Rate Determination in Additively Manufactured Aluminum Alloy 2219

Craig A. Brice, Noah Dennis

Publisher page

Abstract

Metallic additive manufacturing processes generally utilize a conduction mode, welding-type approach to create beads of deposited material that can be arranged into a three-dimensional structure. As with welding, the cooling rates in the molten pool are relatively rapid compared to traditional casting techniques. Determination of the cooling rate in the molten pool is critical for predicting the solidified microstructure and resultant properties. In this experiment, wire-fed electron beam additive manufacturing was used to melt aluminum alloy 2219 under different thermal boundary conditions. The dendrite arm spacing was measured in the remelted material, and this information was used to estimate cooling rates in the molten pool based on established empirical relationships. The results showed that the thermal boundary conditions have a significant effect on the resulting cooling rate in the molten pool. When thermal conduction is limited due to a small thermal sink, the dendrite arm spacing varies between 15 and 35 µm. When thermal conduction is active, the dendrite arm spacing varies between 6 and 12 µm. This range of dendrite arm spacing implies cooling rates ranging from 5 to 350 K/s. Cooling rates can vary greatly as thermal conditions change during deposition. A cooling rate at the higher end of the range could lead to significant deviation from microstructural equilibrium during solidification.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. I. Gibson, D.W. Rosen, B. Stucker: Additive Manufacturing Technologies, Springer, New York, NY, 2010.10.1007/978-1-4419-1120-9 ↗
2. K.M.B. Taminger and R.A. Hafley: Proceedings of the 3rd Annual Automotive Composites Conference, Sept. 9-10, Troy, MI, 2003, pp. 9–10.
3. B.H. Alexander and F. N. Rhines: Trans. AIME, 1950, vol. 188, pp. 1267-1273.
4. A.B. Michael and M.B. Bever: Trans. AIME, 1954, vol. 200, pp. 47-56.
5. J.A. Horwath and L.F. Mondolfo: Acta Metall., 1962, vol. 10, pp. 1037-1042.10.1016/0001-6160(62)90072-X ↗
6. T.F. Bower, H.D. Brody, and M.C. Flemings: Trans. AIME, 1966, vol. 236, pp. 624-634.
7. K.P. Young and D.H. Kirkwood: Metall. Trans. A, 1975, vol. 6A, pp. 197-205.10.1007/BF02673688 ↗
8. D.G. McCartney and J.D. Hunt: Acta Metall., 1981, vol. 29, pp. 1851-1863.10.1016/0001-6160(81)90111-5 ↗
9. A. Munitz: Metall. Trans. B, 1985, vol. 16B, pp. 149-161.10.1007/BF02657500 ↗
10. J.A. Sarreal and G.J. Abbaschian: Metall. Trans. A, 1986, vol. 17A, pp. 2063-2073.10.1007/BF02645003 ↗
11. T. Kraft, A. Roósz, and M. Rettenmayr: Scripta Mater., 1996, vol. 35 (1), pp. 77-82.10.1016/1359-6462(96)00081-4 ↗
12. D. Bouchard and J.S. Kirkaldy: Metall. Mater. Trans. B, 1997, vol. 28B, pp. 651-663.10.1007/s11663-997-0039-x ↗
13. D. Eskin, Q. Du, D. Ruvalcaba, and L. Katgerman: Mater. Sci. Engr. A, 2005, vol. 405, pp. 1-10.10.1016/j.msea.2005.05.105 ↗
14. G. Kasperovich, T. Volkmann, L. Ratke, and D. Herlach: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1183-1191.10.1007/s11661-008-9505-6 ↗
15. C.A. Gandin, S. Mosbah, T. Volkmann, and D.M. Herlach: Acta Mater., 2008, vol. 56, pp. 3023-3035.10.1016/j.actamat.2008.02.041 ↗
16. A.M. Mullis, L. Farrell, R.F. Cochrane, and N.J. Adkins: Metall. Mater. Trans. B, 2013, vol. 44B, pp. 992-999.10.1007/s11663-013-9856-2 ↗
17. T. Sivarupan, C.H. Caceres, and J.A. Taylor: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4071-4080.10.1007/s11661-013-1768-x ↗
18. I. Lichioiu, I. Peter, B. Varga, and M. Rosso: J. Mater. Sci. Technol., 2014, vol. 30(4), pp. 394-400.10.1016/j.jmst.2013.12.001 ↗
19. M.C. Flemings: Solidification Processing, McGraw-Hill Book Co., New York, NY, 1974, pp. 146-154.
20. C.A. Brice and W.H. Hofmeister: Metall. Mater. Trans. A, 2013,vol. 44A, pp. 5147-5153.10.1007/s11661-013-1847-z ↗
21. R.J. Messler, Jr.: Principles of Welding, John Wiley & Sons, Inc., New York, NY, 1999, pp. 175-176.10.1002/9783527617487 ↗