Non-equilibrium transformations involving L12-Al3Zr in ternary Al-X-Zr alloys
Source abstract
Abstract
The metastable $L1_2-Al_3Zr$ phase has been obtained as a solidification product on melt-spinning ternary Al-X-Zr (X = Cu, Ni) alloys. Different non-equilibrium effects of the metastable $Al_3Zr$ phase $(L1_2)$ have been observed in the as-solidified and heat-treated alloys. The solidification sequence begins with the formation of the $L1_2-Al_3Zr$ (cubic) phase as a primary phase, followed by heterogeneous nucleation of \alpha A1. Morphological changes in the primary phase result in a shape transformation from a faceted cube to one with concave interfaces and protrusions along the corners, having a preferential growth along the direction. This is brought about by a kinetic effect taking place during the growth of the $L1_2-Al_3Zr$ phase into the surrounding liquid, as the alloy is quenched. In another instance, the primary $L1_2-Al_3Zr$ phase nucleates as solid-state precipitates of the same $L1_2-Al_3Zr$ phase on annealing, by dissolution and reprecipitation of solute, under the influence of moving grain boundaries. A third case shows the metastable $L1_2$ phase nucleating on the equilibrium $DO_2_3-Al_3Zr$ phase, upon solidification. This is attributed to the sluggish growth kinetics of the latter.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. A. Inoue, Y. Yamamoto, H.M. Kimura, and T. Masumoto: J. Mater. Sci. Lett., 1987, vol. 6, pp. 194–96.10.1007/BF01728983 ↗
2. A.P. Tsai, A. Inoue, and T. Masumoto: J. Mater. Sci. Lett., 1988, vol. 7, pp. 805–07.10.1007/BF00723766 ↗
3. B.M. Watts, M.J. Stowell, B.L. Baikie, and D.G.E. Owen: Met. Sci., 1976, vol. 10, p. 189.10.1016/0036-9748(76)90147-2 ↗
4. Y.H. Kim, A. Inoue, and T. Masumoto: Mater. Trans. JIM, 1990, vol. 31, pp. 747–49.10.2320/matertrans1989.31.747 ↗
5. X.D. Liu: Mater. Trans., JIM, 1998, vol. 39, pp. 783–94.10.2320/matertrans1989.39.783 ↗
6. N. Ryum: J. Inst. Met., 1966, vol. 94, p. 191.
7. N. Ryum: Acta Metall., 1969, vol. 17, pp. 269–78.10.1016/0001-6160(69)90067-4 ↗
8. E. Nes: Acta Metall., 1972, vol. 20, pp. 499–506.10.1016/0001-6160(72)90005-3 ↗
9. O. Izumi and D. Oelschalagel: Z. Metallkd., 1967, vol. 58, p. 842.
10. O. Izumi and D. Oelschalagel: Z. Metallkd., 1969, vol. 60, pp. 845–51.
11. B. Thundal and R. Sundberg: J. Inst. Met., 1969, vol. 90, p. 160.
12. M.S. Zedalis and M.E. Fine: Metall. Trans. A, 1986, vol. 17A, pp. 2187–98.10.1007/BF02645917 ↗
13. Y.C. Chen, M.E. Fine, J.R. Weertman, and R.E. Lewis: Scripta Metall., 1987, vol. 21, pp. 1003–08.10.1016/0036-9748(87)90143-8 ↗
14. A.E. Carlsson and P.J. Meschter: J. Mater. Res., 1989, vol. 4, pp. 1060–63.10.1557/JMR.1989.1060 ↗
15. M.G. Chu: Mater. Sci. Eng., 1994, vols. 179A–180A, pp. 669–75.10.1016/0921-5093(94)90290-9 ↗
16. D. Srinivasan and K. Chattopadhyay: Mater. Sci. Eng., 2001, vols. 304–306, pp. 534–39.10.1016/S0921-5093(00)01510-0 ↗
17. R.A. Ricks, A.J. Porter, and E.C. Ecob: Acta Metall., 1983, vol. 31, p. 43.10.1016/0001-6160(83)90062-7 ↗
18. T. Ohashi and R. Ichikawa: Metall. Trans. A, 1972, vol. 3A, pp. 2300–02.10.1007/BF02643251 ↗
19. T. Ohashi and R. Ichikawa: Z. Metallkd., 1973, vol. 64, pp. 517–21.
20. S. Hori, H. Tai, and Y. Narita: in Rapidly Quenched Metals, S. Steeb and H. Warlimont, eds., 1985, pp. 911–14.10.1016/B978-0-444-86939-5.50217-7 ↗
21. A. Majumdar and B.C. Muddle: Mater. Sci. Eng. A, 1993, vol. 169A, pp. 135–47.10.1016/0921-5093(93)90608-H ↗