journal article·2000-09

Hot deformation mechanisms in a powder metallurgy nickel-base superalloy IN 625

S. C. Medeiros, W. G. Frazier, Y. V. R. K. Prasad

Publisher page

Abstract

The hot working behavior of the nickel-base superalloy IN 625 produced by hot extrusion of a powder metallurgy (P/M) compact has been studied by compression testing in the temperature range 900 °C to 1200 °C and true strain rate range 0.001 to 100 s−1. At strain rates less than about 0.1 s−1, the stress-strain curves exhibited near steady-state behavior, while at higher strain rates, the flow stress reached a peak before flow softening occurred. The processing maps developed on the basis of the temperature and strain rate and strain dependence of the flow stress exhibited three domains. (1) The first domain occurs at lower strain rates ( 10 s−1) and tempe ratures above 1050 °C, with a peak efficiency of about 42 pct occurring at 1150 °C and 100 s−1. Microstructural observations in this domain revealed features such as irregular grain boundaries and grain interiors nearly free from annealing twins, which are typical of DRX of homogeneous γ phase. The instability map revealed that flow instability occurs at strain rates above 1 s−1 and temperatures below 1050 °C, and this is manifested as intense adiabatic shear bands. These results suggest that bulk metal working of this material may be carried out in the high strain rate domain where DRX of homogeneous γ occurs. On the other hand, for achieving a fine-grained product, finishing operations may be done in the intermediate strain rate domain. The wedge cracking domain and the regime of instability must be totally avoided for achieving defectfree products.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. R.B. Frank and T.A. DeBold: NACE Corrosion ’88 Conf., St. Louis, MO, Mar. 21–25, 1988, [paper no. 75.]
2. Alloy Data Custom Age 625 Plus Alloy, Carpenter Technology Corporation, Reading, PA.
3. D. Zhao, P.K. Chaudhury, R.B. Frank, and L.A. Jackman: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1994, pp. 315–29.10.7449/1994/Superalloys_1994_315_329 ↗
4. C.R. Conger, G.D. Smith, and J.F. Radavich: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1997, pp. 447–58.
5. Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, K.A. Lark, and D.R. Barker: Metall. Trans. A, 1984, vol. 15A, pp. 1883–92.10.1007/BF02664902 ↗
6. Hot Working Guide: A Compendium of Processing Maps, [Y.V.R.K. Prasad and S. Sasidhara, eds.], ASM INTERNATIONAL, Materials Park, OH, 1997.
7. Y.V.R.K. Prasad and T. Seshacharyulu: Int. Mater. Rev., 1998, vol. 44, pp. 243–58.10.1179/imr.1998.43.6.243 ↗
8. R. Raj: Metall. Trans. A, 1981, vol. 12A, pp. 1089–97.10.1007/BF02643490 ↗
9. A.H. Chokshi, A.K. Mukherjee, and T.G. Langdon: Mater. Sci. Eng., vol. R10, 1993, pp. 237–74.10.1016/0927-796X(93)90009-R ↗
10. N. Srinivasan and Y.V.R.K. Prasad: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2275–84.10.1007/BF02652327 ↗
11. S.C. Medeiros: Masters Thesis, Wright State University, Dayton, OH, 1999.
12. T. Sakai and J.J. Jonas: Acta Metall., 1984, vol. 32, pp. 189–209.10.1016/0001-6160(84)90049-X ↗