An Investigation of the Massive Transformation from Ferrite to Austenite in Laser-Welded Mo-Bearing Stainless Steels
Source abstract
Abstract
A series of 31 Mo-bearing stainless steel compositions with Mo contents ranging from 0 to 10 wt pct and exhibiting primary δ-ferrite solidification were analyzed over a range of laser welding conditions to evaluate the effect of composition and cooling rate on the solid-state transformation to γ-austenite. Alloys exhibiting this microstructural development sequence are of particular interest to the welding community because of their reduced susceptibility to solidification cracking and the potential reduction of microsegregation (which can affect corrosion resistance), all while harnessing the high toughness of γ-austenite. Alloys were created using the arc button melting process, and laser welds were prepared on each alloy at constant power and travel speeds ranging from 4.2 to 42 mm/s. The cooling rates of these processes were estimated to range from 10 K (°C)/s for arc buttons to 105 K (°C)/s for the fastest laser welds. No shift in solidification mode from primary δ-ferrite to primary γ-austenite was observed in the range of compositions or welding conditions studied. Metastable microstructural features were observed in many laser weld fusion zones, as well as a massive transformation from δ-ferrite to γ-austenite. Evidence of epitaxial massive growth without nucleation was also found when intercellular γ-austenite was already present from a solidification reaction. The resulting single-phase γ-austenite in both cases exhibited a homogenous distribution of Mo, Cr, Ni, and Fe at nominal levels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. T.B. Massalski: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2277–83.10.1007/s11661-002-0351-7 ↗
2. M. Hillert: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2299–1308.10.1007/s11661-002-0353-5 ↗
3. H.I. Aaronson: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2285–97.10.1007/s11661-002-0352-6 ↗
4. H.I. Aaronson and V.K. Vasudevan: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2445–70.10.1007/s11661-002-0366-0 ↗
5. J.M. Howe, V.K. Vasudevan, and W.T. Reynolds, Jr.: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2391–2411.10.1007/s11661-002-0362-4 ↗
6. M. Lima and W. Kurz: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2337–45.10.1007/s11661-002-0357-1 ↗
7. J.F. Nie and B.C. Muddle: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2381–89.10.1007/s11661-002-0361-5 ↗
8. J.E. Wittig: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2373–79.10.1007/s11661-002-0360-6 ↗
9. H.I. Aaronson, S. Mahajan, G.R. Purdy, and M.G. Hall: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2347–51.10.1007/s11661-002-0358-0 ↗
10. P. Wang, D. Veeraraghavan, M. Kumar, and V.K. Vasudevan: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2353–71.10.1007/s11661-002-0359-z ↗
11. J.A. Brooks, M.I. Baskes, and F.A. Greulich: Metall. Trans. A, 1991, vol. 22A, pp. 915–26.10.1007/BF02659001 ↗
12. J.A. Brooks and A.W. Thompson: Int. Mater. Rev., 1991, vol. 36 (1), pp. 16–44.10.1179/imr.1991.36.1.16 ↗
13. S.W. Banovic, J.N. DuPont, and A.R. Marder: Sci. Technol. Weld. Join., 2002, vol. 17 (5), pp. 1–10.
14. M.J. Perricone: “A Fundamental Study of the Weld Solidification Behavior of Superaustenitic Stainless Steel and Ni-Base Alloys in Castings and Conventional Arc Welds,” Lehigh University, Bethlehem, PA, 2003, pp. 1–158.
15. M.J. Cieslak, T.J. Headley, and A.D. Romig, Jr.: Metall. Trans. A, 1986, vol. 17A, pp. 2035–47.10.1007/BF02645001 ↗
16. A. Garner: Corrosion (Houston), 1979, vol. 35 (3), pp. 108–14.10.5006/0010-9312-35.3.108 ↗
17. A. Garner: Mater. Perform., 1982, vol. 21 (8), pp. 9–14.
18. P.I. Marshall and T.G. Gooch: Corrosion (Houston), 1993, vol. 49 (6), pp. 514–26.10.5006/1.3316080 ↗
19. M.B. Rockel and M. Renner: Werkst. Korros., 1984. vol. 35 (12), pp. 537–42.10.1002/maco.19840351202 ↗
20. M.J. Perricone, T.D. Anderson, C.V. Robino, J.N. DuPont, and J.R. Michael: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1976–90.10.1007/s11661-007-9158-x ↗
21. T.D. Anderson, J.N. DuPont, M.J. Perricone, and A.R. Marder: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 86–99.10.1007/s11661-006-9010-8 ↗
22. J.W. Elmer: “The Influence of Cooling Rate on the Microstructure of Stainless Steel Alloys,” Massachusetts Institute of Technology, Cambridge, MA, 1988, pp. 1–388.10.2172/5678406 ↗
23. J.W. Elmer, S.M. Allen, and T.W. Eagar: Metall. Trans. A, 1989, vol. 20A, pp. 2117–31.10.1007/BF02650298 ↗
24. Y. Nakao, K. Nishimoto, and W.P. Zhang: Trans. Jpn. Weld. Soc., 1988, vol. 19 (2), pp. 100–06.
25. M.J. Perricone: Materials Science and Engineering, Lehigh University, Bethlehem, PA, 2005, p. 197.
26. J.N. DuPont, C.V. Robino, and A.R. Marder: Acta Mater., 1998, vol. 46 (13), pp. 4781–90.10.1016/S1359-6454(98)00123-2 ↗
27. J.N. DuPont, J.R. Michael, and C.V. Robino: Weld. J., 2000, vol. 79 (3), pp. 43–48.
28. D.J. Prior, P.W. Trimby, U.D. Weber, and D.J. Dingley: Mineral. Mag., 1996, vol. 60 (403), pp. 859–69.10.1180/minmag.1996.060.403.01 ↗
29. T. Hahn: International Tables for Crystallography, Kluwer Academic Publishers, Dordrecht, The Netherlands, 1996.
30. Powder Diffraction File, International Center for Diffraction Data, Newtown Square, PA.
31. J.N. DuPont, A.R. Marder, M.R. Notis, and C.V. Robino: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2797–2806.10.1007/s11661-998-0320-x ↗
32. S. Katayama and A. Matsunawa: Proc. of Mater. Processing Symp., Laser Inst. of America, ICALEO, 1984, vol. 44, pp. 60–67.10.2351/1.5057623 ↗
33. J.A. Brooks, N.C.Y. Yang, and J.S. Krafcik: Sci. Technol. Weld. Join., 2001, vol. 6 (6), pp. 412–14.10.1179/stw.2001.6.6.412 ↗
34. H. Inoue, T. Koseki, S. Okita, and M. Fuji: Weld. Int., 1997, vol. 11 (12), pp. 937–49.10.1080/09507119709447349 ↗
35. T.B. Massalski: Metall. Trans. A, 1984, vol. 15A, pp. 421–25.10.1007/BF02644965 ↗
36. J.H. Perepezko and T.B. Massalski: Scripta Mater., 1972, vol. 6, pp. 743–52.10.1016/0036-9748(72)90135-4 ↗
37. T.B. Massalski, W.A. Soffa, and D.E. Laughlin: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 825–31.10.1007/s11661-006-0055-5 ↗
38. M. Hillert: Metall. Trans. A, 1984, vol. 15A, pp. 411–19.10.1007/BF02644964 ↗
39. J.H. Perepezko: Metall. Trans. A, 1984, vol. 15A, pp. 437–47.10.1007/BF02644967 ↗
40. M.R. Plichta, W.A.T. Clark, and H.I. Aaronson: Metall. Trans. A, 1984, vol. 15A, pp. 427–35.10.1007/BF02644966 ↗
41. H.I. Aaronson: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 803–23.10.1007/s11661-006-0054-6 ↗
42. H.I. Aaronson and W.T. Reynolds, Jr.: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 961–74.10.1007/s11661-006-0069-z ↗
43. H. Inoue, T. Koseki, S. Ohkita, and T. Tanaka: ISIJ International (Japan), 1995, vol. 35 (10), pp. 1248–57.10.2355/isijinternational.35.1248 ↗
44. M.R. Plichta: in Phase Transformations ‘87, G.W. Lorimer, ed., The Institute of Metals, Cambridge, United Kingdom, 1988, pp. 315–21.
45. T.B. Massalski: Acta Metall., 1958, vol. 6, pp. 243–53.10.1016/0001-6160(58)90143-3 ↗
46. A.J. Perkins and T.B. Massalski: Metall. Trans., 1971, vol. 2, pp. 2701–09.10.1007/BF02814915 ↗
47. T.B. Massalski, A.J. Perkins, and J. Jaklovsky: Metall. Trans., 1972, vol. 3, pp. 687–94.10.1007/BF02642752 ↗
48. H. Inoue, T. Koseki, S. Okita, and M. Fuji: Weld. Int., 1998, vol. 12 (3), pp. 195–206.10.1080/09507119809448473 ↗
49. J.M. Vitek, S.A. David, M.J. Cieslak, J.H. Perepezko, S. Kang, and M.E. Glicksman: The Metal Science of Joining, Cincinnati, OH, 1992, pp. 115–22.
50. S. Fukumoto and W. Kurz: ISIJ Int., 1997, vol. 37 (7), pp. 677–84.10.2355/isijinternational.37.677 ↗
51. S. Fukumoto and W. Kurz: ISIJ Int., 1998, vol. 38 (1), pp. 71–77.10.2355/isijinternational.38.71 ↗
52. S. Fukumoto and W. Kurz: ISIJ Int., 1999, vol. 39 (12), pp. 1270–79.10.2355/isijinternational.39.1270 ↗
53. M. Hillert: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 351–52.10.1007/s11661-004-0136-2 ↗
54. E.S.K. Menon, M.R. Plichta, and H.I. Aaronson: Acta Metall., 1988, vol. 36 (2), pp. 321–32.10.1016/0001-6160(88)90009-0 ↗
55. J.A. Brooks and M.I. Baskes: Recent Trends in Welding Science and Technology: TWR 1989: Proc. 2nd Int. Conf. on Trends in Welding Research, Gatlinburg, TN, 1989.
56. K. Nohara and K. Hirano: J. Iron Steel Inst. Jpn., 1977, vol. 63, pp. 926–36.10.2355/tetsutohagane1955.63.6_926 ↗
57. B. Sundman: Thermo-Calc, Stockholm, 2001.
58. N. Saunders: “Fe-Data Thermodynamic Database,” ThermoTech Ltd., Guildford, United Kingdom, 2001.
59. M.J. Perricone, C.V. Robino, J.R. Michael, M. Reece, P.S. Duran, T.D. Anderson, and J.N. DuPont: American Welding Society Annual Conf., Atlanta, GA, 2006.