journal article·2006-01

Understanding the rapid solidification of Al-4.3Cu and Al-17Cu using X-ray tomography

A. Prasad, H. Henein, E. Maire, Ch. -A. Gandin

Publisher page

Abstract

X-ray tomography using synchrotron radiation with 1-µm beam resolution at European Synchrotron Radiation Facility was used to generate three-dimensional (3-D) images for rapidly solidified 660 µm A14.3 wt pct Cu and 500 µm Al17 wt pct Cu atomized droplets. Based on the observation of microstructural features in the 3-D images, physical phenomena of rapid solidification such as nucleation and initial growth, recalescence, and porosity were apparent and are reported. A single nucleation site was observed and the coordinates of this single nucleation site were evaluated. The volume fraction of the initial growth regime and recalescence during solidification was successfully quantified. It was also possible to semiquantitatively explain the porosity distribution within the droplets. These observations will be used to present a description of the sequence of the solidification events in these droplets.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. H. Jones: Rapid Solidification of Metals and Alloys, The Institution of Metallurgists, London, 1982, pp. 77–81.
2. M.C. Flemings: Metall. Treatises, 1981, pp. 291–300.
3. A. Prasad, H. Henein, E. Maire, and C.-A. Gandin: Can. Metall. Q., 2004, vol. 43 (2), pp. 273–82.10.1179/cmq.2004.43.2.273 ↗
4. A. Prasad, H. Henein, and C.-A. Gandin: Int. Symp. Light Met., 2002, pp. 101–14.
5. MPIF09: Standard Test Methods for Metal Powders and Powder Metallurgy Products, Metal Powders Industries Federation, Princeton, NJ, 1992.
6. L.C. Morin, M. Reider, J. Meja, and H. Henein: Int. Symp. Light Met., 1996, pp. 293–304.
7. H. Henein: Mater. Sci. Eng. A, 2001, vol. 326 (1), pp. 92–100.10.1016/S0921-5093(01)01429-0 ↗
8. R.T. DeHoff and F.N. Rhines: Quantitative Microscopy, 1st ed., McGraw-Hill Book Company, New York, NY, 1968, pp. 45–53.
9. C.V. Howard and M.G. Reed: Unbiased Stereology: 3-Dimensional Measurement in Microscopy, BIOS Scientific Publishers Limited, Oxfordshire, UK, 1998, pp. 39–44.
10. Y. Wu, T.J. Piccone, Y. Shiohara, and M. Flemings: Metall. Trans. A, 1984, vol. 18A, pp. 915–24.
11. J. Lipton, M.E. Glicksmann, and W. Kurz: Mater. Sci. Eng., 1984, vol. 65, pp. 57–63.10.1016/0025-5416(84)90199-X ↗
12. J. Lipton, M.E. Glicksmann, and W. Kurz: Metall. Trans. A, 1987, vol. 18A, pp. 341–45.10.1007/BF02825716 ↗
13. J. Lipton, W. Kurz, and R. Trivedi: Acta Metall., 1987, vol. 35 (4), pp. 957–64.10.1016/0001-6160(87)90174-X ↗
14. J. Lipton, W. Kurz, and R. Trivedi: Acta Metall., 1987, vol. 35 (4), pp. 965–70.10.1016/0001-6160(87)90175-1 ↗
15. T. Okamoto and K. Kishitake: J. Cryst. Growth, 1975, vol. 29, pp. 137–46.10.1016/0022-0248(75)90217-1 ↗
16. D.J. Fisher and W. Kurz: Fundamentals of Solidification, Trans Tech Publications, Aedermannsdorf, Switzerland, 2000, pp. 257–59.
17. J.B. Wiskel, K. Navel, H. Henein, and E. Marie: Can. Metall. Q., 2002, vol. 41 (2), pp. 193–204.10.1179/cmq.2002.41.2.193 ↗
18. J.A. Horwath and L.F. Mondolfo: Acta Metall., 1962, vol. 10, pp. 1037–42.10.1016/0001-6160(62)90072-X ↗
19. B.P. Bardes and M. Flemings: Trans. AFS, 1966, vol. 74 (2), pp. 406–12.
20. T.Z. Kattamis and M.C. Flemings: Trans. AIME, 1966, vol. 236 (2), pp. 1523–32.
21. R.F. Cochrane, D.M. Herlach, and B. Feuerbacher: Mater. Sci. Eng. A, 1991, vol. A133 (2), pp. 706–10.10.1016/0921-5093(91)90167-L ↗