Oxidation protective silicide coating on Mo-Si-B alloys
Source abstract
Abstract
A MoSi2 coating was successfully formed on a Mo-9Si-18B alloy, consisting of Mo5SiB2 (T2) and Mo solid solution (Moss) phases, using pack cementation with Si. Isothermal and cyclic oxidation tests of pack-cemented Mo-9Si-18B alloys were performed at 1300 °C and 1500 °C. Steady-state oxidation rates at both temperatures are almost equal to those of pure MoSi2. The MoSi2 layer is completely transformed into Mo5Si3 (T1) containing B after oxidation at 1500 °C for 24 hours. Thermal expansion of the T1 phase is anisotropic, but a [001] texture in the growth direction for the columnar grains in the T1 layer reduces thermal stresses generated around the phases. Evolution of T1 layers during oxidation between 1300 °C and 1500 °C was investigated; their growth rate constants and the interdiffusion coefficient of Mo and Si in the Mo-Si-B system have been evaluated and compared with those in the binary Mo-Si system. Furthermore, we have studied phase transformations in a simpler system MoSi2vs T2 using MoSi2/T2 diffusion couples. Layers of T1 and MoB + T1 were formed in the diffusion zone during oxidation at temperatures between 1400 °C and 1600 °C. This behavior is different from that of the pack-cemented Mo-9Si-18B alloy. Pack-cemented T2 single crystals show a diffusion structure similar to that of MoSi2/T2 diffusion couples, but the ratio of layer thickness is different. Based on these diffusion results, a method for extending the lifetime of the MoSi2 layer is proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. M.K. Meyer and M. Akinc: J. Am. Ceram. Soc., 1996, vol. 79, pp. 938–44.10.1111/j.1151-2916.1996.tb08528.x ↗
2. M.K. Meyer, A.J. Thom, and M. Akinc: Intermetallics, 1999, vol. 7, pp. 153–62.10.1016/S0966-9795(98)00058-2 ↗
3. M.G. Mendiratta, T.A. Parthasarathy, and D.M. Dimiduk: Intermetallics, 2002, vol. 10, pp. 225–32.10.1016/S0966-9795(01)00118-2 ↗
4. T.A. Parthasarathy, M.G. Mendiratta, and D.M. Dimiduk: Acta Mater., 2002, vol. 50, pp. 1857–68.10.1016/S1359-6454(02)00039-3 ↗
5. J.H. Schneibel, M.J. Kramer, O. Unal, and R.N. Wright: Intermetallics, 2001, vol. 9, pp. 25–31.10.1016/S0966-9795(00)00093-5 ↗
6. H. Choe, J.H. Schneibel, and R.O. Ritchie: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 225–39.10.1007/s11661-003-0325-4 ↗
7. K. Ito, K. Ihara, K. Tanaka, M. Fujikura, and M. Yamaguchi: Intermetallics, 2001, vol. 9, pp. 591–602.10.1016/S0966-9795(01)00049-8 ↗
8. T. Hayashi, K. Ito, K. Ihara, M. Fujikura, and M. Yamaguchi: Intermetallics, 2004, vol. 12, pp. 699–704.10.1016/j.intermet.2004.02.009 ↗
9. K. Ito, M. Kumagai, T. Hayashi, and M. Yamaguchi: Scripta Mater., 2003, vol. 49, pp. 285–90.10.1016/S1359-6462(03)00289-6 ↗
10. K. Ito, T. Murakami, K. Adachi, and M. Yamaguchi: Intermetallics, 2003, vol. 11, pp. 763–72.10.1016/S0966-9795(03)00074-8 ↗
11. T.C. Munro and B. Gleeson: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3761–72.10.1007/BF02595625 ↗
12. B.V. Cockeram: Surface Coatings Technol., 1995, vols. 76–77, pp. 20–27.10.1016/0257-8972(95)02492-1 ↗
13. R. Sakidja, J. Myers, S. Kim, and J.H. Perepezko: Int. J. Refrac. Met. Hard Mater., 2000, vol. 18, pp. 193–204.10.1016/S0263-4368(00)00030-5 ↗
14. A.K. Vasudevan and J.J. Petrovic: Mater. Sci. Eng., 1992, vol. A155, pp. 1–7.10.1016/0921-5093(92)90308-N ↗
15. K. Ito, T. Hayashi, M. Yokobayashi, and H. Numakura: Intermetallics, 2004, vol. 12, pp. 407–15.10.1016/j.intermet.2003.12.009 ↗
16. F. Chu, D.J. Thoma, K. McClellan, P. Peralta, and Y. He: Intermetallics, 1999, vol. 7, pp. 611–20.10.1016/S0966-9795(98)00059-4 ↗
17. E. Fitzer and K. Matthias: Hochtemperature-Werkstoffe, Proc. 6th Plansee Seminar, Vienna, Austria, F. Benesovsky, ed., Springer, Berlin, Germany, 1969, p. 740.
18. R.W. Bartlett, P.R. Gage, and P.A. Larssen: Trans. TMS-AIME, 1964, vol. 230, pp. 1528–34.
19. F. Christian, H. Sohma, T. Tanaka, H. Tanaka, K. Ohsasa, and T. Narita: Mater. Trans. JIM, 1998, vol. 39, pp. 286–91.10.2320/matertrans1989.39.286 ↗
20. J.K. Yoon, J.K. Lee, K.H. Lee, J.Y. Byun, G.H. Kim, and K.T. Hong: Intermetallics, 2003, vol. 11, pp. 687–96.10.1016/S0966-9795(03)00068-2 ↗
21. P.C. Tortorici: Ph.D. thesis, Purdue University, West Lafayette, IN, 1997.
22. S.L. Kharatyan, H.A. Chatilyan, and A.B. Harutyunyan: Defect and Diffusion Forum, 2001, vols. 194–199, pp. 1557–62.10.4028/www.scientific.net/DDF.194-199.1557 ↗
23. P.C. Tortorici and M.A. Dayananda: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 545–50.10.1007/s11661-999-0046-4 ↗
24. C. Wagner: Acta Metall., 1969, vol. 17, pp. 99–107.10.1016/0001-6160(69)90131-X ↗
25. M.A. Dayananda: Def. Diff. Forum, 1993, vols. 521, pp. 95–98.
26. T. Hayashi, K. Ito, and H. Numakura: Intermetallics, 2005, vol. 13, pp. 93–100.10.1016/j.intermet.2004.06.005 ↗