journal article·2012-03

The Mechanism of High Strength-Ductility Steel Produced by a Novel Quenching-Partitioning-Tempering Process and the Mechanical Stability of Retained Austenite at Elevated Temperatures

S. Zhou, K. Zhang, Y. Wang, J. F. Gu, Y. H. Rong

Publisher page

Abstract

The designed steel of Fe-0.25C-1.5Mn-1.2Si-1.5Ni-0.05Nb (wt pct) treated by a novel quenching-partitioning-tempering (Q-P-T) process demonstrates an excellent product of strength and elongation (PSE) at deformed temperatures from 298 K to 573 K (25 °C to 300 °C) and shows a maximum value of PSE (over 27,000 MPa pct) at 473 K (200 °C). The results fitted by the exponent decay law indicate that the retained austenite fraction with strain at a deformed temperature of 473 K (200 °C) decreases slower than that at 298 K (25 °C); namely, the transformation induced plasticity (TRIP) effect occurs in a larger strain range at 473 K (200 °C) than at 298 K (25 °C), showing better mechanical stability. The work-hardening exponent curves of Q-P-T steel further indicate that the largest plateau before necking appears at the deformed temperature of 473 K (200 °C), showing the maximum TRIP effect, which is due to the mechanical stability of considerable retained austenite. The microstructural characterization reveals that the high strength of Q-P-T steels results from dislocation-type martensite laths and dispersively distributed fcc NbC or hcp e-carbides in martensite matrix, while excellent ductility is attributed to the TRIP effect produced by considerable retained austenite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. P.J. Jacques, E. Girault, A. Mertens, B. Verlinden, J. Van Humbeeck, and F. Delannay: ISIJ Int., 2001, vol. 41, pp. 1068–74.10.2355/isijinternational.41.1068 ↗
2. F.G. Caballero and H.K.D.H. Bhadeshia: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 251–57.10.1016/j.cossms.2004.09.005 ↗
3. J.G. Speer, D.V. Edmonds, F.C. Rizzo, and D.K. Matlock: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 219–37.10.1016/j.cossms.2004.09.003 ↗
4. F.G. Caballero, M.J. Santofimia, C. García-Mateo, J. Chao, and C.G. de Andrés: Mater. Des., 2009, vol. 30, pp. 2077–83.10.1016/j.matdes.2008.08.042 ↗
5. T.Y. Hsu: Mater. Sci. Forum, 2007, vols. 561–565, pp. 2283–86.10.4028/www.scientific.net/MSF.561-565.2283 ↗
6. J.G. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611–22.10.1016/S1359-6454(03)00059-4 ↗
7. X.D. Wang, N. Zhong, Y.H. Rong, T.Y. Hsu, and L. Wang: J. Mater. Res., 2009, vol. 24, pp. 260–67.10.1557/JMR.2009.0029 ↗
8. N. Zhong, X.D. Wang, L. Wang, and Y.H. Rong: Mater. Sci. Eng., A, 2009, vol. 506, pp. 111–16.10.1016/j.msea.2008.11.014 ↗
9. W.C. Leslie: The Physical Metallurgy of Steel, McGraw-Hill Co., New York, NY, 1981, p. 1.
10. J. Durnin and K.A. Ridal: J. Iron Steel Inst., 1968, vol. 206, pp. 60–67.
11. K.I. Sugimoto, M. Kobayashi, and S.I. Hashimoto: Metall. Trans. A, 1992, vol. 23A, pp. 3085–91.10.1007/BF02646127 ↗
12. M.Y. Sherif, C.G. Mateo, T. Sourmail, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2004, vol. 20, pp. 319–22.10.1179/026708304225011180 ↗
13. D.B. Santos, R. Barbosa, P.P.d. Oliveira, and E.V. Pereloma: ISIJ Int., 2009, vol. 49, pp. 1592–1600.10.2355/isijinternational.49.1592 ↗
14. I.B. Timokhina, P.D. Hodgson, and E.V. Pereloma: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1599–1609.10.1007/s11661-003-0305-8 ↗
15. I.B. Timokhina, P.D. Hodgson, and E.V. Pereloma: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2331–41.10.1007/s11661-006-0213-9 ↗
16. J. Shi, X. Sun, M. Wang, W. Hui, H. Dong, and W. Cao: Scripta Mater., 2010, vol. 63, pp. 815–18.10.1016/j.scriptamat.2010.06.023 ↗
17. X.D. Wang, W.Z. Xu, Z.H. Guo, L. Wang, and Y.H. Rong: Mater. Sci. Eng., A, 2010, vol. 527, pp. 3373–78.10.1016/j.msea.2010.02.026 ↗
18. Y. Ohmori and I. Tamura: Metall. Trans. A, 1992, vol. 23A, pp. 2737–51.10.1007/BF02651753 ↗
19. Y. Tan: Acta Metall. Sinica, 1985, vol. 21, pp. 181–86.
20. D.V. Edmonds, K. He, M.K. Miller, F.C. Rizzo, A. Clarke, D.K. Matlock, and J.G. Speer: 5th Int. Conf. on Processing and Manufacturing of Advanced Materials, Vancouver, Canada, 2006, pp. 4819–25.
21. H.Y. Li, X.W. Lu, W.J. Li, and X.J. Jin: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1–17.