journal article·2012-09

Precipitates in Biomedical Co-28Cr-6Mo-(0–0.41)C Alloys Heat-Treated at 1473 K to 1623 K (1200 °C to 1350 °C)

Shingo Mineta, Alfirano, Shigenobu Namba, Takashi Yoneda, Kyosuke Ueda, Takayuki Narushima

Publisher page

Abstract

The phase and formation/dissolution of biomedical Co-28Cr-6Mo-xC (x = 0, 0.12, 0.16, 0.24, 0.33, and 0.41, in mass pct) alloys were investigated before and after heat treatment at high temperatures. The heat-treatment temperatures and holding periods were varied from 1473 K to 1623 K (1200 °C to 1350 °C) and from 0 ks to 43.2 ks, respectively. The intermetallic σ phase was observed in the as-cast and heat-treated alloys without added carbon. In the carbon-added alloys, the M23C6-type, π-phase (M2T3X-type carbide with a β-Mn structure), η-phase (M6C-M12C-type), and M7C3-type carbides were observed depending on the carbon content and heat-treatment conditions. A complete precipitate dissolution was achieved in the alloys with a carbon content of 0 to 0.24 mass pct. The holding time required for complete precipitate dissolution in the carbon-added alloys increased with increasing heat-treatment temperature above 1548 K (1275 °C). The formation of π-phase and M7C3-type carbides was observed in the carbon-added alloys during heat treatment at high temperatures of 1548 K to 1623 K (1275 °C to 1350 °C). Two types of π phase with different lattice constants and chemical compositions were confirmed in the alloys with carbon contents of 0.24, 0.33, and 0.41 mass pct after heat treatment at 1573 K to 1623 K (1300 °C to 1350 °C). The M7C3-type carbide observed at high temperatures occurred in a starlike precipitate with a complicated microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Hydrogen embrittlement and corrosion behaviors in metals · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. M. Caudillo, M. Herrera-Trejo, M.R. Castro, E. Ramírez, C.R. González, and J.I. Juárez: J. Biomed. Mater. Res., 2002, vol. 59, pp. 378–85.10.1002/jbm.10001 ↗
2. L.E. Ramírez, M. Castro, M. Méndez, J. Lacaze, M. Herrera, and G. Lesoult: Scripta Mater., 2002, vol. 47, pp. 811–16.10.1016/S1359-6462(02)00305-6 ↗
3. A.J.T. Clemow and B.L. Daniell: J. Biomed. Mater. Res., 1979, vol. 13, pp. 265–79.10.1002/jbm.820130208 ↗
4. J. Jeciejewicz: J. Less-Common Met., 1964, vol. 7, pp. 318–20.10.1016/0022-5088(64)90028-1 ↗
5. A.C. Fraker and H.H. Stadelmaier: Trans. TMS-AIME, 1969, vol. 245, pp. 847–50.
6. D.S. Janisch, M. Garel, A. Eder, W. Lengauer, K. Dreyer, and H. van den Berg: Int. J. Refract. Met. Hard Mat., 2008, vol. 26, pp. 179–89.10.1016/j.ijrmhm.2007.05.006 ↗
7. J.M. Guilemany, J.M. de Paco, J. Nutting, and J.R. Miguel: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1913–21.10.1007/s11661-999-0002-3 ↗
8. L.E. Ramírez-Vidaurri, M. Castro-Román, M. Herrera-Trejo, C.V. García-López, and E. Almanza-Casas: J. Mater. Proc. Tech., 2009, vol. 209, pp. 1681–87.10.1016/j.jmatprotec.2008.04.039 ↗
9. H.S. Dobbs and J.L.M. Robertson: J. Mater. Sci., 1983, vol. 18, pp. 391–401.10.1007/BF00560627 ↗
10. M. Herrera, A. Espinoza, J. Méndez, M. Castro, J. López, and J. Rendón: J. Mater. Sci., 2005, vol. 16, pp. 607–11.10.1007/s10856-005-2530-8 ↗
11. J.W. Weeton and R.A. Signorelli: Trans. Am. Soc. Met., 1955, vol. 47, pp. 815–52.
12. H. Mancha, E. Carranza, J.I. Escalante, G. Mendoza, M. Méndez, F. Cepeda, and E. Valdés: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 979–84.10.1007/s11661-001-0355-8 ↗
13. C. Montero-Ocampo, M. Talavera, and H. Lopez: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 611–20.10.1007/s11661-999-0052-6 ↗
14. T. Kilner, R.M. Pilliar, G.C. Weatherly, and C. Allibert: J. Biomed. Mater. Res., 1982, vol. 16, pp. 63–79.10.1002/jbm.820160109 ↗
15. L. Zhuang and E.W. Langer: Z. Metallk., 1989, vol. 80, pp. 251–57.
16. S. Mineta, S. Namba, T. Yoneda, K. Ueda, and T. Narushima: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2129–38.10.1007/s11661-010-0227-1 ↗
17. Alfirano, S. Mineta, S. Namba, T. Yoneda, K. Ueda, and T. Narushima: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1941–49.10.1007/s11661-011-0604-4 ↗
18. T. Narushima, Alfirano, S. Mineta, S. Namba, T. Yoneda, and K. Ueda: Adv. Mater. Res., 2011, vol. 277, pp. 51–58.10.4028/www.scientific.net/AMR.277.51 ↗
19. JCPDS card no. 36-1482.
20. A. Markström, S. Norgren, K. Frisk, B. Jansson, and T. Sterneland: Int. J. Mater. Res., 2006, vol. 97, pp. 1243–50.10.3139/146.101365 ↗
21. T. Sterneland, A. Markström, S. Norgren, R.E. Aune, and S. Seetharaman: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3023–28.10.1007/s11661-006-0183-y ↗
22. JCPDS card no. 26-0428.
23. M. Kikuchi, S. Wakita, and R. Tanaka: Trans. ISIJ, 1973, vol. 13, pp. 226–28.10.2355/isijinternational1966.13.226 ↗
24. V.W. Köster and F. Sperner: Arch. Eisenhüttenwesen, 1955, vol. 26, pp. 555–59.10.1002/srin.195502078 ↗
25. P.R. Sahm, M. Lorenz, W. Hugi, and V. Frühauf: Metall. Trans., 1972, vol. 3, pp. 1022–25.10.1007/BF02647691 ↗
26. E.R. Thompson and F.D. Lemkey: Metall. Trans., 1970, vol. 1, pp. 2799–2806.10.1007/BF03037817 ↗