Analysis of the Chemistry of Ni-Base Turbine Disk Superalloys Using An Alloys-By-Design Modeling Approach
Source abstract
Abstract
The chemistry of the Ni-base superalloys used for turbine disks is critiqued by making use of the recently developed Alloys-By-Design computer-based tools. Compositions within the Ni-Cr-Co-Al-Ti-Mo-W-Ta(-Zr-C-B) design space are evaluated virtually. The assessment is made on the basis of sub-models for yield strength, creep behavior, oxidation resistance, and density; microstructural factors such as $$\gamma\prime$$ volume fraction and $$\gamma\prime$$ solvus temperature are considered where needed. The trade-offs between the different factors are studied in a quantitative sense. Diagrams are developed for the different alloy properties to highlight the limitations and challenges that one encounters when designing new grades of alloy or when optimizing existing grades. Composition-property maps are constructed that allow for an informed approach when defining an alloy composition. Specifically, the impact of chromium, molybdenum, and tungsten additions when mechanical behavior and lifing considerations are of concern is demonstrated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Reed R.C., Tao T., Warnken N. (2009) Acta Mater. 57:5898–5913.10.1016/j.actamat.2009.08.018 ↗
2. C. Ducrocq, A. Lasalmonie, and Y. Honnorat: in Superalloys 1988, D.N. Duhl, G. Maurer, S. Antolovich, C. Lund, and S. Reichman, eds., TMS, Warrendale, PA, 1988, pp. 63–72.10.7449/1988/Superalloys_1988_63_72 ↗
3. J. Guedou, J. Lautridou, and Y. Honnorat: in Superalloys 1992, S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, and D.L. Klarstrom, eds., TMS, Warrendale, PA, 1992, pp. 267–76.10.7449/1992/Superalloys_1992_267_276 ↗
4. Small C.J., Saunders N. (1999) MRS Bull. 24:22–26.10.1557/S0883769400052143 ↗
5. Tancret F., Bhadeshia H.K.D.H., MacKay D.J.C. (2003) Mater. Sci. Technol. 19:283–90.10.1179/026708303225009788 ↗
6. T. Yokokawa, H. Saeki, Y. Fukuyama, T. Yoshida, and H. Harada: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 859–66.10.7449/2004/Superalloys_2004_859_866 ↗
7. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
8. N. Saunders: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal,T.M. Pollock, and D.A. Woodford., eds.,TMS, Warrendale, PA, 1996, pp. 101–10.10.7449/1996/Superalloys_1996_101_110 ↗
9. P.W. Keefe, S.O. Mancuso, and G.E. Maurer: in Superalloys 1992, S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, and D.L. Klarstrom, eds., TMS, Warrendale, PA, 1992, pp. 487–96.10.7449/1992/Superalloys_1992_487_496 ↗
10. Seiser B., Drautz R., Pettifor D.G. (2011) Acta Mater. 59:749–6310.1016/j.actamat.2010.10.013 ↗
11. Gayda J., Kantzos P., Miller J. (2003) J. Fail. Anal. Prev. 3:55–59.10.1007/BF02717409 ↗
12. J.Y. Guedou, I. Augustins-Lecallier, L. Naze, P. Caron, and D. Locq: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, and E.S. Huron, eds.,TMS, Warrendale, PA, 2008, pp. 21–30.10.7449/2008/Superalloys_2008_21_30 ↗
13. J. Radavich, D. Furrer, T. Carneiro, and J. Lemsky: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, and E.S. Huron, eds.,TMS, Warrendale, PA, 2008, pp. 63–72.10.7449/2008/Superalloys_2008_63_72 ↗
14. T.P. Gabb, J. Gayda I. Telesman, and P.T. Kantzos: US Patent 6974508, 2005.
15. D. Locq, M. Marty, and P. Caron: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A Green, M. McLean, S.L. Olson, and J.J Schirra, eds., TMS, Warrendale, PA, 2000, pp. 395–403.
16. S.J. Hessel, W. Voice, A.W. James, S.A. Blackham, C.J. Small, and M.R. Winstone: US Patent 6132527, 2000.
17. M. J. Donachie and S.J Donachie: Superalloys: A Technical Guide, ASM Internation, Materials Partk, OH, 2002.10.31399/asm.tb.stg2.9781627082679 ↗
18. Jarrett R.N., Tien J.K. (1982) Metall. Trans A 13A:1021–3210.1007/BF02643399 ↗
19. Cui C.Y., Gu Y.F., Ping D.H., Harada H. (2009) Metall. Mater. Trans. A 40A:282–9110.1007/s11661-008-9746-4 ↗
20. R.M. Neal: Software for Flexible Bayesian Modelling and Markov Chain Sampling, Ph.D. thesis, University of Toronto.
21. Bhadeshia H.K.D.H. (1999) ISIJ Int. 39:966–7910.2355/isijinternational.39.966 ↗
22. E.S. Huron, K.R. Bain, D.P. Mourer, and T.P. Gabb: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, and E.S. Huron, eds.,TMS, Warrendale, PA, 2008, pp. 181–89.10.7449/2008/Superalloys_2008_181_189 ↗
23. Gu Y., Harada H., Cui C., Ping D., Sato A., Fujioka J. (2006) Scripta Mater. 55:815–1810.1016/j.scriptamat.2006.07.008 ↗
24. R.J.D. Furrer: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds.,TMS, Warrendale, PA, 2004, pp. 381–90.
25. Nickel Development Institute, Birmingham England: High Temperature High Strength Nickel Base Alloys, Inco Alloys International Ltd., Huntington.
26. W.B. Kent: NASA/CR-135131 NASA, Lewis Research Centre, 1977.
27. J. Gayda: NASA/TM-2003-212471 NASA, Glenn Research Center, 2003.
28. J. Gayda: NASA/TM-2001-210814 NASA, Glenn Research Centre, 2001.
29. D. Ellis, T.P. Gabb, and A. Garg: NASA/TM-2004-213140 NASA, Glenn Research Centre, 2004.
30. T.P. Gabb, P.T. Kantzos, and K. O’Connor: NASA/TM-2002-211796 NASA, Glenn Research Centre, 2002.
31. J.R. Davis: Nickel, Cobalt and Their Alloys, ASM International, Materials Park, OH, 2000.
32. J. Jones and D.J.C. MacKay: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford., eds., TMS, Warrendale, PA, 1996, pp. 417–24.10.7449/1996/Superalloys_1996_417_424 ↗
33. Chen JH., Rogers P.M., Little J.A. (1997) Oxid. Met. 47:381–410.10.1007/BF02134783 ↗
34. A. Encinas-Oropes, G.L. Drew, M.C. Hardy, A.J. Leggett, J.R. Nicholls, and N.J. Simms: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, and E.S. Huron, eds., TMS, Warrendale, PA, 2008, pp. 609–18.10.7449/2008/Superalloys_2008_609_618 ↗
35. Zheng L., Zhang M.C., Dong J.X. (2010) Appl. Surf. Sci. 256:7510–1510.1016/j.apsusc.2010.05.098 ↗
36. Al-hatab K.A., Al-bukhaiti M.A., Krupp U., Kantehm M. (2011) Oxid. Met. 75:209–2810.1007/s11085-010-9230-6 ↗
37. Wagner C. (1933) Z. Phys. Chem. B.Chem. E 21:25–4110.1515/zpch-1933-2105 ↗
38. Karunaratne M.S.A., Carter P., Reed R.C. (2000) Mater. Sci. Eng. A Struct. 281:229–3310.1016/S0921-5093(99)00705-4 ↗
39. Karunaratne M.S.A, Reed R.C. (2003) Acta Mater. 51:2905–1910.1016/S1359-6454(03)00105-8 ↗
40. Krčmar M., Fu C.L., Janotti A., Reed R.C. (2005) Acta Mater. 53:2369–76.10.1016/j.actamat.2005.01.044 ↗
41. M. Hardy, B. Zirbel, G. Shen, and R. Shankar: in Superalloys 2004, K.A Green, T.M Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds.,TMS, Warrendale, PA, 2004, pp. 83–90.10.7449/2004/Superalloys_2004_83_90 ↗
42. D.P. Mourer, E.S. Huron, K.R. Bain, E.E. Montero, P.L. Reynolds, and J.J. Schirra: US Patent 6521175B1, 2003.
43. Mishima Y., Ochial S., Hamou N., Yodogawa M., Suzuki T. (1986) Trans. JIM 27:656–6410.2320/matertrans1960.27.656 ↗
44. J. Gayda and T.P. Gabb: NASA/TM-2003-212474 NASA, Glenn Research Center, 2003.
45. T.P. Gabb, J. Gayda, I. Telesman, and P.T. Kantzos: US Patent 6974508B1, 2005.
46. W. Cao: US Patent 6730264B2, 2004.
47. Nembach E. (2006) Mater. Sci. Eng. A Struct. 429:277–86.10.1016/j.msea.2006.05.032 ↗
48. Kozar R.W., Suzuki A., Milligan W.W., Schirra J.J., Savage M.F., Pollock T.M. (2009) Metall. Mater. Trans. A 40A:1588–603.10.1007/s11661-009-9858-5 ↗
49. Baluc N., Karnthaler H.P., Mills M.J. (1991) Philos. Mag. A 64:137–50.10.1080/01418619108206131 ↗
50. Raynor D., Silcock J. M. (1970) Met. Sci. 4:121–30.10.1179/msc.1970.4.1.121 ↗
51. E.C. Guo and F.J. Ma: in Superalloys 1980, J.K. Tien, S.T. Wlodek, H. Morrow III, M. Gell, and G.E. Maurereds, eds, TMS, Warrendale, PA, 1980, pp.431–38.10.7449/1980/Superalloys_1980_431_438 ↗
52. Di Martino I., Brooks J.W., Reed P.A.S., Holdway P., Wisbey A. (2007) Mater. Sci. Technol. 23:1402–07.10.1179/174328407X244013 ↗
53. Chandran M., Sondhi S.K. (2011) Model. Simul. Mater. Sci. 19:1–7.10.1088/0965-0393/19/2/025008 ↗
54. A.P. Miodownik and N.J. Saunders: in Applications of Thermodynamics in the Synthesis and Processing of Materials, P. Nash and B. Sundman, eds., TMS, Warrendale, PA, 1995 pp. 91–104.
55. Unocic R.R., Viswanathan G.B., Sarosi P.M., Karthikeyan S., Li J., Mills M.J. (2008) Mater. Sci. Eng. A Struct. 483:25–3210.1016/j.msea.2006.08.148 ↗
56. Pollock T.M., Tin S. (2006) J. Propul. Power. 22:361–7410.2514/1.18239 ↗
57. Giggins C.S., Pettit F.S. (1969) Trans. AIME 245:2495–507.
58. Giggins C.S., Pettit F. S. (1971) J. Electrochem. Soc 118:1782–90.10.1149/1.2407837 ↗
59. Sato A., Chiu Y.L., Reed R.C. (2011) Acta Mater. 59:225–40.10.1016/j.actamat.2010.09.027 ↗
60. Chen Q.Z., Jones N., Knowles D.M. (2002) Acta Mater 50:1095–112.10.1016/S1359-6454(01)00410-4 ↗
61. E.S. Huron, K.R. Bain, D.P. Mourer, J.J. Schirra, P.L. Reynolds, and E.E. Montero: in Superalloys 2004, K.A Green, T.M Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds.,TMS, Warrendale, PA, 2004, pp. 73–81.10.7449/2004/Superalloys_2004_73_81 ↗
62. Garosshen T.J., Tillman T.D., McCarthy G.P. (1987) Metall. Trans. A 18A:69–77.10.1007/BF02646223 ↗