journal article·2008-09

Effects of Changes in Test Temperature and Loading Conditions on Fracture Toughness of a Zr-Based Bulk Metallic Glass

Hala A. Hassan, Laszlo Kecskes, J.J. Lewandowski

Publisher page

Abstract

The effects of changes in loading rate and test temperature on the fracture toughness of a Zr-based bulk metallic glass (BMG) were investigated under both displacement-rate-controlled and loading-rate-controlled conditions in three-point bending. The tests were conducted at displacement rates ranging from 0.01 to 10 mm/min, loading rates ranging from 31.5 to 5700 lb/min, and test temperatures from room temperature (298 K) to 623 K. Significant effects of test temperature on the toughness were obtained, while testing under displacement rate control vs loading rate control also produced differences in the toughness and fracture morphology. A preliminary fracture mechanism map is provided to illustrate the effects of changes in temperature and strain rate on the toughness normalized with room-temperature values.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications · Cultural Heritage Materials Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. A. Peker, W.L. Johnson: Appl. Phys. Lett., 1993, vol. 63, pp. 2342–4410.1063/1.110520 ↗
2. A. Inoue, T. Zhang, T. Masumoto: Mater. Trans. JIM, 1990, vol. 31 (5), pp. 177–8310.2320/matertrans1989.31.177 ↗
3. T. Zhang, A. Inoue, T. Masumoto: Mater. Trans. JIM, 1991, vol. 32, pp. 1005–1010.2320/matertrans1989.32.1005 ↗
4. S.J. Pang, T. Zhang, K. Asami, A. Inoue: Acta Mater., 2002, vol. 50, pp. 489–9710.1016/S1359-6454(01)00366-4 ↗
5. A. Gebert, U.K. Mudali, J. Eckert, L. Schultz: Mater. Res. Soc. Symp. Proc., 2004, vol. 806, p. 369
6. A. Leonhard, L.Q. Xing, M. Heilmaier, A. Gebert, J. Eckert, L. Schultz: Nanostruct. Mater., 1998, vol. 10, pp. 805–1410.1016/S0965-9773(98)00117-2 ↗
7. P. Lowhaphandu, J.J. Lewandowski: Scripta Mater., 1998, vol. 38, pp. 1811–1710.1016/S1359-6462(98)00102-X ↗
8. P. Lowhaphandu, L.A. Ludrosky, S.L. Montgomery, J.J. Lewandowski: Intermetallics, 2000, vol. 8, pp. 487–9210.1016/S0966-9795(99)00137-5 ↗
9. H.A. Bruck, T. Christman, A.J. Rosakis, W.L. Johnson: Scripta Mater., 1994, vol. 30, pp. 429–3410.1016/0956-716X(94)90598-3 ↗
10. C.J. Gilbert, R.O. Ritchie, W.L. Johnson: Appl. Phys. Lett., 1997, vol. 71, pp. 476–7910.1063/1.119610 ↗
11. J.J. Lewandowski: Mater. Trans. JIM, 2001, vol. 42 (4), pp. 633–3710.2320/matertrans.42.633 ↗
12. J.J. Lewandowski, P. Lowhaphandu: Phil. Mag. A, 2002, vol. 82 (17), pp. 3427–4110.1080/01418610208240453 ↗
13. C.C. Aydiner, E. Ustundag, M.B. Prime, A. Peker: J. Non-Crystalline Solids, 2003, vol. 316, pp. 82–9510.1016/S0022-3093(02)01940-3 ↗
14. M. Telford: Mater. Today, 2004, Mar., pp. 36–4310.1016/S1369-7021(04)00124-5 ↗
15. R. Schennach, T. Grady, D.G. Naugle, H. McWhiney, C.C. Hays, W.L. Johnson, and D.L. Cocke: J. Vac. Sci. Technol. A, 2001, vol. 19 (4), part I, pp. 1447–5310.1116/1.1380719 ↗
16. J.R. Scully, A. Gebert, J.H. Payer: J. Mater. Res., 2007, 22 (2), pp. 302–1310.1557/jmr.2007.0051 ↗
17. A.L. Greer: Science, 1995, vol. 267, pp. 1947–5310.1126/science.267.5206.1947 ↗
18. H.A. Davies: in Amorphous Metallic Alloys, F.E. Luborsky, ed., Butterworth and Company, London, 1983, p. 810.1016/B978-0-408-11030-3.50007-8 ↗
19. G.Y. Wang, P.K. Liaw, A. Peker, B. Wang, M.L. Benson, w. Yuan, W.H. Peter, L. Huang, M. Freels, R.A. Buchanan, C.T. Liu, and C.R. Brooks, Mat. Res. Soc. Symp. Proc. “ Amorphous and Nanocrystalline Metals”, R. Busch, T.C. Hufnagel, J. Eckert, A. Inoue, W.J. Johnson, and A.R. Yavari, eds., 2004, vol. 806, pp. 331–4110.1557/PROC-806-MM7.11 ↗
20. A. Vormelker, L.O. Vatamanu, L. Kecskes, and J.J. Lewandowski: Metall. Mater. Trans. A, 2008, vol. 39A, DOI 10.1007/s11661-007-9410-4, in press10.1007/s11661-007-9410-4 ↗
21. G. Sunny, J.J. Lewandowski, V. Prakash: J. Mater. Res., 2007, vol. 22 (2), pp. 389–40110.1557/jmr.2007.0042 ↗
22. F. Yuan, J.J. Lewandowski, V. Prakash: J. Mater. Res., 2007, vol. 22 (2), pp. 402–1110.1557/jmr.2007.0053 ↗
23. Standard Test Method for Measurement of Fatigue Crack Growth Rates, ASTM E647-98, ASTM, Philadelphia, PA, 2000
24. Standard Test Method for Plane Strain Fracture Toughness of Metallic Materials, ASTM E399-2000, ASTM, Philadelphia, PA, 2000
25. Standard Practice for Determination of Fracture Toughness of Steels Using Equivalent Energy Method, ASTM E992-1984, ASTM, Philadelphia, PA, 1984
26. British Standard Method for Determination of the Rate of Fatigue Crack Growth in Metallic Materials, BS 6835-SENB3, British Standard Institution, London, UK, 1988
27. H.H. Johnson: Mater. Res. Stand., 1965, vol. 5 (9), pp. 442–45
28. J.J. Lewandowski, M. Shazly, A. Shamimi Nuori: Scripta Mater., 2006, vol. 54 (3), pp. 337–4110.1016/j.scriptamat.2005.10.010 ↗
29. W.L Johnson: Prog. Mater. Sci., 1986, vol. 30, pp. 81–13410.1016/0079-6425(86)90005-8 ↗
30. P. Wesseling, P. Lowhaphandu, J.J. Lewandowski: Mater. Res. Soc. Symp. Proc., 2003, vol. 754, p. 281
31. K. Fujita, A. Okamoto, N. Nishiyama, Y. Yokoyama, H. Kimura, and A. Inoue: J. Alloys Compd., 2007, vol. 434–435, pp. 22–2710.1016/j.jallcom.2006.08.328 ↗
32. K. Fujita, N. Nishiyama, K. Amiya, T. Zhang, H. Kimura, and A. Inoue: J. Metastable Nanocryst. Mater., 2005, vol. 24–25, pp. 323–2610.4028/www.scientific.net/JMNM.24-25.323 ↗
33. A. Kawashima, H. Kurishita, H. Kimura, T. Zhang, A. Inoue: Mater. Trans., 2005, vol. 46 (7), pp. 1725–3210.2320/matertrans.46.1725 ↗
34. A. Masuhr, R. Busch, and W.L. Johnson: J. Non-Cryst Solids, 1999, part 2, pp. 566–7110.1016/S0022-3093(99)00133-7 ↗
35. A. Masuhr, T.A. Waniuk, R. Busch, W.L. Johnson: Phys. Rev. Lett., 1999, vol. 82, pp. 2290–9310.1103/PhysRevLett.82.2290 ↗
36. G. Wang, J. Shen, J.F. Sun, Z.P. Lu, Z.H. Stachurski, B.D. Zhou: Intermetallics, 2005, vol. 13, pp. 642–4810.1016/j.intermet.2004.10.011 ↗
37. Y. Kawamura, T. Shibata, A. Inoue, T. Masumoto: Mater. Trans. JIM, 1999, vol. 40 (4), pp. 794–80310.2320/matertrans1989.40.794 ↗
38. J. Lu, G. Ravichandran, W.L. Johnson: Acta Mater., 2003, vol. 51, pp. 3429–4310.1016/S1359-6454(03)00164-2 ↗
39. S. Matsuka: Relaxation Phenomena in Polymers, Hanser Publishers, New York, NY, 1992
40. F.T. Trouton: Proc. R. Soc., London, 1906, vol. 77, pp. 426–4010.1098/rspa.1906.0038 ↗
41. Standard Test Method for Measurement of Fracture Toughness, ASTM E1820-99, ASTM, Philadelphia, PA, 1999
42. F. Spaepen: Acta Metall., 1977, vol. 25, pp. 407–1510.1016/0001-6160(77)90232-2 ↗
43. P.J. Wray: J. Appl. Phys., 1969, vol. 40, pp. 4018–2910.1063/1.1657137 ↗
44. M.F. Ashby: Cambridge University Engineering Department Report No. CUED/C/MATS/TR34, Cambridge University, Cambridge, United Kingdom, 1977
45. M.F. Ashby, C. Gandhi, D.M.R. Taplin: Acta Metall., 1979, vol. 27, pp. 699–72910.1016/0001-6160(79)90105-6 ↗
46. C. Gandhi, M.F. Ashby: Acta Metall., 1979, vol. 27, pp. 1565–60210.1016/0001-6160(79)90042-7 ↗
47. R.J. Fields, T. Weerasooriya, M.F. Ashby: Metall. Trans. A, 1980, vol. 11A, pp. 333–4710.1007/BF02660638 ↗
48. A.S. Argon: Acta Metall., 1979, vol. 24, pp. 47–5810.1016/0001-6160(79)90055-5 ↗