Austenite in Transformation-Induced Plasticity Steel Subjected to Multiple Isothermal Heat Treatments
Source abstract
Abstract
The thermodynamic limit to the progress of the bainite reaction in steels containing a cementite inhibitor often leaves large quantities of thermally or mechanically unstable austenite. Such austenite is not effective in delaying the onset of plastic instabilities during the course of deformation. In such circumstances, it is useful to conduct isothermal transformation at a high temperature where the rate of reaction is relatively rapid, followed by a lower temperature step that permits more bainite to be generated. This in turn increases the stability of the refined austenite, which then transforms gently over a large range of strain during a tensile test. A significant corollary is that the two-step heat treatments are unnecessary in low-carbon steels, where the bainite reaction is able to proceed to a greater extent before reaching the thermodynamic limit. Furthermore, the two-step process can be counterproductive in low carbon steel, because the austenite content is reduced to a level below which it does not enhance the mechanical properties. Other circumstances in which multiple heat treatments are necessary are also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. G. Papadimitriu, G. Fourlaris, J. Phys. IV 7(C5), 131–36 (1997).
2. S.B. Singh, H.K.D.H. Bhadeshia, Mater. Sci. Eng. A 245, 72–79 (1998).10.1016/S0921-5093(97)00701-6 ↗
3. F.B. Pickering, Physical Metallurgy and the Design of Steels (Applied Science Publishers, Essex, U.K., 1978).
4. K. Zhu, O. Bouaziz, C. Oberbillig, M. Huang, Mater. Sci. Eng. A 527, 6614–19 (2010).10.1016/j.msea.2010.06.061 ↗
5. R.H. Goodenow, R.H. Barkalow, and R.F. Hehemann: Physical Properties of Martensite and Bainite, Special Report 93. Iron and Steel Institute, London, 1969, pp. 135–41.
6. S.H. Lee, J.Y. Kang, H.N. Han, K.H. Oh, H.C. Lee, D.W. Suh, and S.J. Kim: ISIJ Int., 2005, vol. 45, pp. 1219–71.10.2355/isijinternational.45.1217 ↗
7. H.-G. Lambers, D. Canadinc, H.J. Maier, Mater. Sci. Eng. A 541, 73–80 (2012).10.1016/j.msea.2012.02.004 ↗
8. H.K.D.H. Bhadeshia, D.V. Edmonds, Met. Sci. 17, 411–19 (1983).10.1179/030634583790420600 ↗
9. J.M. Jang, S.J. Kim, N.H. Kang, K.M. Cho, D.W. Suh, Met. Mater. Int. 15, 916–69 (2009).
10. L. Rancel, M. Gomez, I. Gutierrez, and S.F. Medina: Mater. Sci. Eng. A, 2011, vol. 530, pp. 21–27.10.1016/j.msea.2011.09.001 ↗
11. G. Gao, H. Zhang, Z. Tan, W. Liu, B. Bai, Mater. Sci. Eng. A 559, 165–69 (2013).10.1016/j.msea.2012.08.064 ↗
12. K. Hase, C. Garcia-Mateo, H.K.D.H. Bhadeshia, Mater. Sci. Eng. A A438–440, 145–48 (2006).10.1016/j.msea.2005.12.070 ↗
13. X.L. Wang, K.M. Wu, F. Hu, L. Yu, X.L. Wan, Scripta Mater. 74, 56–59 (2014).10.1016/j.scriptamat.2013.10.019 ↗
14. H.-S. Yang, H.K.D.H. Bhadeshia, Mater. Sci. Technol. 23, 556–60 (2007).10.1179/174328407X176857 ↗
15. E.M. Bellhouse, J.R. McDermid, Metall. Mater. Trans. A 41A, 1460–73 (2010).10.1007/s11661-010-0185-7 ↗
16. H.K.D.H. Bhadeshia, A.R. Waugh, Acta Metall. 30, 775–84 (1982).10.1016/0001-6160(82)90075-X ↗
17. I. Stark, G.D.W. Smith, and H.K.D.H. Bhadeshia: in Phase Transformations ’87, G.E. Lorimer, Institute of Metals, London, U.K., 1988, pp. 211–15.
18. I. Stark, G.D.W. Smith, H.K.D.H. Bhadeshia, Metall. Trans. A 21, 837–44 (1990).10.1007/BF02656567 ↗
19. B. Josefsson and H.-O. Andrén: J. Phys. Colloque, 1988, vol. 49, C6-293–C6-298.10.1051/jphyscol:1988651 ↗
20. B. Josefsson and H.O. Andrén: in Recent Trends in Welding Science and Technology (TWR’89), S.A. David and J.M. Vitek, eds., ASM International, Metals Park, OH, 1989, pp. 243–47.
21. F.G. Caballero, M.K. Miller, C. Garcia-Mateo, Mater. Sci. Technol. 26, 889–98 (2010).10.1179/026708310X12635619987943 ↗
22. H.K.D.H. Bhadeshia: Bainite in Steels, 2nd ed., Institute of Materials, London, U.K., 2001.
23. P.J. Jacques, Curr. Opin. Solid State Mater. Sci. 8, 259–65 (2004).10.1016/j.cossms.2004.09.006 ↗
24. B.C. DeCooman, Curr. Opin. Solid State Mater. Sci. 8, 285–303 (2004).10.1016/j.cossms.2004.10.002 ↗
25. G. Haidemenopoulos, A. Kermanidis, C. Malliaros, H. Dickert, P. Kucharzyk, W. Bleck, Mater. Sci. Eng. A 573, 7–11 (2013).10.1016/j.msea.2013.02.015 ↗
26. R. Blondé, E. Jimenez-Melero, L. Zhao, N. Schell, E. Brüke, S. van der Zwaag, N.H. van Dijk, Mater. Sci. Eng. A 594, 125–34 (2014).10.1016/j.msea.2013.11.001 ↗
27. H.K.D.H. Bhadeshia, Proc. R. Soc. Lond. A 466, 3–18 (2010).10.1098/rspa.2009.0407 ↗
28. C. Garcia-Mateo, F.G. Caballero, T. Sourmail, M. Kuntz, J. Cornide, V. Smanio, E. Elvira, Mater. Sci. Eng. A 549, 185–92 (2012).10.1016/j.msea.2012.04.031 ↗
29. K.W. Andrews, J. Iron Steel Inst. 203, 721–27 (1965).
30. H.S. Yang, H.K.D.H. Bhadeshia, Scripta Mater. 60, 493–95 (2009).10.1016/j.scriptamat.2008.11.043 ↗
31. H.K.D.H. Bhadeshia and A.R. Waugh: in Solid-Solid Phase Transformations: TMS-AIME, H.I. Aaronson, D.E. Laughlin, R.F. Sekerka, and C.M. Wayman, eds., TMS–AIME, Warrendale, Pennsylvania, 1982, pp. 993–98.
32. M. Peet, S.S. Babu, M.K. Miller, H.K.D.H. Bhadeshia, Scripta Mater. 50, 1277–81 (2004).10.1016/j.scriptamat.2004.02.024 ↗
33. F.G. Caballero, M.K. Miller, S.S. Babu, C. Garcia-Mateo, Acta Mater. 55, 381–90 (2007).10.1016/j.actamat.2006.08.033 ↗
34. C. Garcia-Mateo, M. Peet, F.G. Caballero, H.K.D.H. Bhadeshia, Mater. Sci. Technol. 20, 814–18 (2004).10.1179/026708304225017355 ↗
35. F.G. Caballero, M.K. Miller, A.J. Clarke, C. Garcia-Mateo, Scripta Mater. 63, 442–45 (2010).10.1016/j.scriptamat.2010.04.049 ↗
36. I.B. Timokhina, X.Y. Xiong, H. Beladi, S. Mukherjee, P.D. Hodgson, Mater. Sci. Technol. 27, 739–41 (2011).10.1179/1743284710Y.0000000021 ↗
37. S.K. Putatunda, J. Yang, Mater. Sci. Forum 426–432, 913–18 (2003).10.4028/www.scientific.net/MSF.426-432.913 ↗
38. J. Yang, S.K. Putatunda, Mater. Design 25, 219–30 (2004).10.1016/j.matdes.2003.09.021 ↗
39. S.K. Putatunda, A. Deokar, G. Bingi, Mater. Sci. Forum 638–642, 3453–58 (2010).10.4028/www.scientific.net/MSF.638-642.3453 ↗