Quench Sensitivity of AA 7136 Alloy: Contribution of Grain Structure and Dispersoids
Source abstract
Abstract
Quench sensitivity of the extruded AA7136 alloy plate specimens with coarse elongated recrystallized grains (CG), fine equiaxed recrystallized grains (EG), and fibrous partial-recrystallized grains (FG) was investigated with the aim to understand the quantitative contribution of grain structure and dispersoids. With the decrease of quenching rate from about 244 °C/s to 1.3 °C/s, the hardness decrement after aging is about 45, 40, and 30 pct, respectively, for the CG, EG, and FG specimens; therefore, quench sensitivity is the highest for CG specimen, intermediate for EG specimen, and the lowest for FG specimen. There are major quenching-induced η (MgZn2) phase and minor T (Al2Zn3Mg3) phase in the slowly-quenched CG, EG, and FG specimens, and a plate-like Y phase occasionally appears in subgrains of the FG specimen. The quantitative contribution to quench sensitivity by grain boundaries, subgrain boundaries, and dispersoids in different specimens is discussed based on the amount of quenching-induced precipitates associated with them.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. X. Zhang, Y. Chen and J. Hu: Prog. Aerosp. Sci., 2018, vol. 97, pp. 22-34.10.1016/j.paerosci.2018.01.001 ↗
2. T. Dursun and C. Soutis: Mater. Des., 2014, vol. 56, pp. 862-71.10.1016/j.matdes.2013.12.002 ↗
3. A. Heinz, A. Haszler, C. Keidel, S. Moldenhauer, R. Benedictus, and W.S. Miller: Mater. Sci. Eng. A, 2000, vol. 80, pp. 102-07.10.1016/S0921-5093(99)00674-7 ↗
4. P. A. Rometsch, Y. Zhang and S. Knight: Trans. Nonferrous Met. Soc. China, 2014, vol. 24, pp. 2003-17.10.1016/S1003-6326(14)63306-9 ↗
5. M.F. Ibrahim, A.M. Samuel, and F.H. Samuel: Mater. Des., 2014, vol. 57, pp. 342-50.10.1016/j.matdes.2013.11.078 ↗
6. M.J. Starink, B. Milkereit, Y. Zhang, and P.A. Rometsch: Mater. Des., 2015, vol. 88, pp. 958-71.10.1016/j.matdes.2015.09.058 ↗
7. S.D. Liu, B. Chen, C.B. Li, Y. Dai, Y.L. Deng and X.M. Zhang: Corros. Sci., 2015, vol. 91, pp. 203-12.10.1016/j.corsci.2014.11.024 ↗
8. B.H. Nie, P.Y. Liu, and T.T. Zhou: Mater. Sci. Eng. A, 2016, vol. 667, pp. 106-14.10.1016/j.msea.2016.04.095 ↗
9. A. Deschamps, G. Texier, S. Ringeval, and L. Delfaut-Durut: Mater. Sci. Eng. A, 2009, vol. 501, pp. 133-39.10.1016/j.msea.2008.09.067 ↗
10. M. Tiryakioğlu, J.S. Robinson, and P.D. Eason: Mater. Sci. Eng. A, 2014, vol. 618, pp. 22-28.10.1016/j.msea.2014.09.002 ↗
11. C.E. Bates and G.E. Totten: Heat Treat. Met., 1988, vol. 4, pp. 89-97.
12. G.P. Dolan, and J.S. Robinson: J. Mater. Process. Tech., 2004, vol. 153-154, pp. 346-51.10.1016/j.jmatprotec.2004.04.065 ↗
13. J.S. Robinson, D.A. Tanner, C.E. Truman, A.M. Paradowska and R.C. Wimpory: Mater. Charact., 2012, vol. 65, pp. 73-85.10.1016/j.matchar.2012.01.005 ↗
14. S.T. Lim, S.J. Yun and S.W. Nam: Mater. Sci. Eng. A, 2004, vol. 371, pp. 82-90.10.1016/S0921-5093(03)00653-1 ↗
15. J.S. Robinson, R.L. Cudd, D.A. Tanner and G.P. Dolan: J. Mater. Process. Tech., 2001, vol. 119, pp. 261-67.10.1016/S0924-0136(01)00927-X ↗
16. L.H. Lin, Z.Y. Liu, S. Bai, Y.R. Zhou, W.J. Liu and Q. Lv: Mater. Sci. Eng. A, 2017, vol. 682, pp. 640-47.10.1016/j.msea.2016.11.092 ↗
17. J.S. Chen, X.W. Li, B.Q. Xiong, Y.A. Zhang, Z.H. Li, H.W. Yan, H.W Liu and S.H. Huang: Rare Met., 2017, pp. 1–7.
18. J.G. Tang, H. Chen, X.M. Zhang, S.D. Liu, W.J. Liu and H. Ouyang: Trans. Nonferrous Met. Soc. China, 2012, vol. 22, pp. 1255-63.10.1016/S1003-6326(11)61313-7 ↗
19. L.H. Lin, Z.Y. Liu, S. Bai, P.Y. Ying and X.H. Wang: Mater. Des., 2015, vol. 86, pp. 679-85.10.1016/j.matdes.2015.07.169 ↗
20. S.D. Liu, W.J. Liu, Y. Zhang, X.M. Zhang and Y.L. Deng: J. Alloys Comp., 2010, vol. 507, pp. 53-61.10.1016/j.jallcom.2010.07.124 ↗
21. X.M. Zhang, W.J. Liu, S.D. Liu and M.Z. Zhou: Mater. Sci. Eng. A, 2011, vol. 528, pp. 795-02.10.1016/j.msea.2010.07.033 ↗
22. C.B. Li, S.Q. Han, S.D. Liu, Y.L. Deng and X.M. Zhang: Trans. Nonferrous Met. Soc. China, 2016, vol. 26, pp. 2276-82.10.1016/S1003-6326(16)64319-4 ↗
23. Y. Deng, Z.M. Yin, K. Zhao, J.Q. Duan and Z.B. He: J. Alloys Comp., 2012, vol. 530, pp. 71-80.10.1016/j.jallcom.2012.03.108 ↗
24. S.D. Liu, X.M. Zhang, M.A. Chen, J.H. You and X.Y. Zhang: Trans. Nonferrous Met. Soc. China, 2007, vol. 17, pp. 787-92.10.1016/S1003-6326(07)60175-7 ↗
25. H.C. Fang, H. Chao and K.H. Chen: Mater. Sci. Eng. A, 2014, vol. 610, pp. 10-16.10.1016/j.msea.2014.05.021 ↗
26. H.Y. Li, J.J. Liu, W.C. Yu, H. Zhao and D.W. Li: Trans. Nonferrous Met. Soc. China, 2016, vol. 26, pp. 1191-200.10.1016/S1003-6326(16)64250-4 ↗
27. Y. Zhang, C. Bettles, P.A. Rometsch: J. Mater. Sci., 2014, vol. 49, pp. 1709-15.10.1007/s10853-013-7856-x ↗
28. C.B. Li, S.L. Wang, D.Z. Zhang, S.D. Liu, Z.J. Shan and X.M. Zhang: J. Alloys Comp., 2016, vol. 688, pp. 456-62.10.1016/j.jallcom.2016.07.089 ↗
29. R.C. Dorward and D.J. Beernsten: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2481-84.10.1007/BF02671263 ↗
30. S.D. Liu, Q.M. Zhong, Y. Zhang, W.J. Liu, X.M. Zhang and Y.L. Deng: Mater. Des., 2010, vol. 31, pp. 3116-20.10.1016/j.matdes.2009.12.038 ↗
31. S.D. Liu, C.B. Li, S.Q. Han, Y.L. Deng and X.M. Zhang: J. Alloys Compd., 2015, vol. 625, pp. 34-43.10.1016/j.jallcom.2014.10.195 ↗
32. B. Morere, J.C. Ehrström, P.J. Gregson and I. Sinclair: Metall. Mater. Trans. A, 2000, vol. 31, pp. 2503-15.10.1007/s11661-000-0195-y ↗
33. H.C. Fang, H. Chao, K.H. Chen: J. Alloys Compd., 2015, vol. 622, pp. 166-73.10.1016/j.jallcom.2014.10.044 ↗
34. A. Day, P. Trimby, K. Mehnert and B. Neumann: Channel 5: User Manual, Oxford Instruments, 2007.
35. X.M. Li and M.J. Starink: J. Alloys Compd., 2011, vol. 509, pp. 471-76.10.1016/j.jallcom.2010.09.064 ↗
36. Y. Deng, Z.M. Yin and F.G. Cong: Intermetallics, 2012, vol. 26, pp. 114-21.10.1016/j.intermet.2012.03.006 ↗
37. K. Wen, B.Q. Xiong, Y.A. Zhang, G.J. Wang, X.W. Li, Z.H. Li, S.H. Huang and H.W. Liu: Rare Metal Mater. Eng., 2017, vol. 46, pp. 928-34.10.1016/S1875-5372(17)30124-8 ↗
38. C. Mondal and A.K. Mukhopadhyay: Mater. Sci. Eng. A, 2005, vol. 391, pp. 367-76.10.1016/j.msea.2004.09.013 ↗
39. K. Wen, Y.Q. Fan, G.J. Wang, L.B. Jin, X.W. Li, Z.H. Li, Y.A. Zhang and B.Q. Xiong: Mater. Des., 2016, vol. 101, pp. 16-23.10.1016/j.matdes.2016.03.150 ↗
40. J.K. Park and A.J. Ardell: Metall. Trans. A, 1983, vol. 14A, pp. 1957-65.10.1007/BF02662363 ↗
41. A. Deschamps and Y. Brechet: Scripta Mater., 1998, vol. 39, pp. 1517-22.10.1016/S1359-6462(98)00357-1 ↗
42. S.D. Liu, C.B. Li, Y.L. Deng, X.M. Zhang and Q.M. Zhong: Met. Mater. Int., 2014, vol. 20, pp. 195-200.10.1007/s12540-014-2001-1 ↗
43. N. Birbilis and R.G. Buchheit: J. Electrochem. Soc., 2005, vol. 152, pp. B140-51.10.1149/1.1869984 ↗
44. G. Bergman, J.L.T. Waugh, and L. Pauling: Acta Cryst., 1957, vol. 10, pp. 254-59.10.1107/S0365110X57000808 ↗
45. H. Löffler, I. Kovács, and J. Lendvai: J. Mater. Sci., 1983, vol. 18, pp. 2215-40.10.1007/BF00541825 ↗
46. S.D. Liu, Y. Zhang, W.J. Liu, Y.L. Deng and X.M. Zhang: Trans. Nonferrous Met. Soc. China, 2010, vol. 20, pp. 1-6.10.1016/S1003-6326(09)60088-1 ↗
47. J.D. Robson: Mater. Sci. Eng. A, 2004, vol. 382, pp. 112-21.10.1016/j.msea.2004.05.006 ↗
48. H. Zhao, F. De Geuser, A. K. Da Silva, A. Szczepaniak, B. Gault, D. Ponge, and D. Raabe: Acta Mater., 156:318-29, 201810.1016/j.actamat.2018.07.003 ↗
49. Y. Zhang, M. Weyland, B. Milkereit, M. Reich and P.A. Rometsch: Sci. Rep., 2016, vol. 6, pp. 23109.10.1038/srep23109 ↗
50. Y. Zhang, B. Milkereit, O. Kessler, C. Schick and P.A. Rometsch: J. Alloys Compd., 2014, vol. 584, pp. 581-89.10.1016/j.jallcom.2013.09.014 ↗
51. S.D. Liu, Q. Li, H.Q. Lin, L. Sun, T. Long, L.Y. Ye and Y.L. Deng: Mater. Des., 2017, vol. 132, pp. 119-28.10.1016/j.matdes.2017.06.054 ↗
52. J. Buha, R.N. Lumley, A.G. Crosky: Mater. Sci. Eng. A, 2008, vol. 492, pp. 1-10.10.1016/j.msea.2008.02.039 ↗
53. X.S. Xu, J.X. Zheng, Z. Li, R.C. Luo, B. Chen: Mater. Sci. Eng. A, 2017, vol. 691, pp. 60-70.10.1016/j.msea.2017.03.032 ↗
54. W.S. Rasband: ImageJ, U.S. National Institutes of Health, Bethesda, MD, http://rsb.info.nih.gov/ij/, 1997–2009.
55. J.D. Robson and P.B. Prangnell: Mater. Sci. Technol., 2002, vol. 18, pp. 607-1410.1179/026708302225003622 ↗