journal article·2019-04-15

Microstructure and Mechanical Properties of Ti-6Al-4V Rods Fabricated by Powder Compact Extrusion of TiH2/Al60V40 Powder Blend

Yifei Luo, Yuehuang Xie, Wei Zeng, Jiamiao Liang, Deliang Zhang

Publisher page

Abstract

Nearly fully dense Ti-6Al-4V rods were fabricated by powder compact extrusion of TiH2/Al60V40 powder blend. The microstructure, mechanical properties, and fracture behaviors of the Ti-6Al-4V rods extruded at various temperatures from 1100 °C to 1400 °C were investigated. The results showed that with the extrusion temperature of 1100 °C, undissolved V-rich particles still existed in the microstructure, but they disappeared once the extrusion temperature increased to 1200 °C. Nearly complete dehydrogenation of TiH2 was achieved during rapid induction heating, holding, and extrusion. With increasing the extrusion temperature, prior β grain sizes and α/β lamella colony sizes increased dramatically, while the change of α lamella thickness was much less significant. The correlation between microstructure and mechanical properties suggests that α/β lamella interfaces, instead of colony boundaries, are responsible for strengthening. The coarse prior β grains whose sizes reached 150 μm had a deleterious effect on the tensile ductility due to localized deformation, as evidenced by the intergranular fracture. The rod extruded at 1200 °C had the best elongation to fracture of 9.3 pct while still keeping a high yield strength of 969 MPa and ultimate tensile strength of 1102 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Additive Manufacturing Materials and Processes · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. D. Banerjeea and J.C. Williams: Acta Mater., 2013, vol. 61, pp. 844-879.10.1016/j.actamat.2012.10.043 ↗
2. G. Lütjering and J.C. Williams: Titanium, 2nd ed., Springer Berlin Heidelberg, New York, 2007, pp. 203-258.
3. Z.Z. Fang, J.D. Paramore, P. Sun, K.S.R. Chandran, Y. Zhang, Y. Xia, F. Cao, M. Koopman, and M. Free: Int. Mater. Rev., 2017, pp. 1–53.
4. C. Cui, B. Hu, L. Zhao, and S. Liu: Mater. Des., 2011, vol. 32, pp. 1684-1691.10.1016/j.matdes.2010.09.011 ↗
5. F. Yang and B. Gabbitas: J. Alloys Compd., 2017, vol. 695, pp. 1455-1461.10.1016/j.jallcom.2016.10.282 ↗
6. C. Liang, M.X. Ma, M.T. Jia, S. Raynova, J.Q. Yan, and D.L. Zhang: Mater. Sci. Eng. A, 2014, vol. 619, pp. 290-299.10.1016/j.msea.2014.09.083 ↗
7. Y. Zheng, X. Yao, J. Liang, and D. Zhang: Metall. Mater. Trans. A, 2016, vol. 47, pp. 1842-1853.10.1007/s11661-016-3333-x ↗
8. M. Jia, D. Zhang, J. Liang, and B. Gabbitas: Metall. Mater. Trans. A, 2017, vol. 48, pp. 2015-2029.10.1007/s11661-017-3965-5 ↗
9. F. Yang, D. Zhang, B. Gabbitas, H. Lu, and C. Wang: Mater. Sci. Eng. A, 2014, vol. 598, pp. 360-367.10.1016/j.msea.2014.01.055 ↗
10. F. Cao, K.R. Chandran, P. Kumar, P. Sun, Z.Z. Fang, and M. Koopman: Metall. Mater. Trans. A, 2016, vol. 47, pp. 2335-2345.10.1007/s11661-016-3409-7 ↗
11. F. Cao, K.R. Chandran, and P. Kumar: Scripta Mater., 2017, vol. 130, pp. 22-26.10.1016/j.scriptamat.2016.11.005 ↗
12. B. Sharma, S.K. Vajpai, and K. Ameyama: J. Alloys Compd., 2016, vol. 683, pp. 51-55.10.1016/j.jallcom.2016.05.020 ↗
13. S. Luo, Y. Yang, G. Schaffer, and M. Qian: Scripta Mater., 2013, vol. 69, pp. 69-72.10.1016/j.scriptamat.2013.03.005 ↗
14. B. Liu, S. Huang, L. Chen, J. Van Humbeeck, and J. Vleugels: Mater. Lett., 2017, vol. 191, pp. 89-92.10.1016/j.matlet.2017.01.060 ↗
15. Y.H. Li, R.B. Chen, G.X. Qi, Z.T. Wang, and Z.Y. Deng: J. Alloys Compd., 2009, vol. 485, pp. 215-218.10.1016/j.jallcom.2009.06.003 ↗
16. D.L. Zhang, C.C. Koch, and R.O. Scattergood: Mater. Sci. Eng. A, 2009, vol. 516, pp. 270-275.10.1016/j.msea.2009.03.024 ↗
17. L. Zeng and T.R. Bieler: Mater. Sci. Eng. A, 2005, vol. 392, pp. 403-414.10.1016/j.msea.2004.09.072 ↗
18. L. Huang, L. Geng, B. Wang, H. Xu, and B. Kaveendran: Compos. Part A, 2012, vol. 43, pp. 486-491.10.1016/j.compositesa.2011.11.014 ↗
19. H.J. Christ, A. Senemmar, M. Decker, and K. Prüßner: Sadhana, 2003, vol. 28, pp. 453-465.10.1007/BF02706443 ↗
20. C. Liang, M. Ma, M. Jia, S. Raynova, J. Yan, and D. Zhang: Metall. Mater. Trans. A, 2015, vol. 46, pp. 5095-5102.10.1007/s11661-015-3108-9 ↗
21. G. Chen and P. Cao: Metall. Mater. Trans. A, 2013, vol. 44, pp. 5630-5633.10.1007/s11661-013-2078-z ↗
22. G.W. Wille and J.W. Davis: Hydrogen in titanium alloys, McDonnell Douglas Astronautics Co., St. Louis, 1981, pp. 14-17.10.2172/6420120 ↗
23. M.L. Wasz, F.R. Brotzen, R.B. Mclellan, and A.J. Griffin: Int. Mater. Rev., 2014, vol. 41, pp. 1-12.10.1179/imr.1996.41.1.1 ↗
24. S.L. Semiatin, S.L. Knisley, P.N. Fagin, D.R. Barker, and F. Zhang: Metall. Mater. Trans. A, 2003, vol. 34, pp. 2377-2386.10.1007/s11661-003-0300-0 ↗
25. A.R. Troiano: Metallogr. Microstruct. Anal., 2016, vol. 5, pp. 557-569.10.1007/s13632-016-0319-4 ↗
26. Y. Feng, W. Zhang, G. Cui, J. Wu, and W. Chen: J. Alloys Compd., 2017, vol. 721, pp. 383-391.10.1016/j.jallcom.2017.05.309 ↗
27. T. Ahmed and H. Rack: Mater. Sci. Eng. A, 1998, vol. 243, pp. 206-211.10.1016/S0921-5093(97)00802-2 ↗
28. B. Vrancken, L. Thijs, J.P. Kruth, and J.V. Humbeeck: J. Alloys Compd., 2012, vol. 541, pp. 177-185.10.1016/j.jallcom.2012.07.022 ↗
29. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25-28.
30. G. Lütjering: Mater. Sci. Eng. A, 1999, vol. 263, pp. 117-126.10.1016/S0921-5093(98)01169-1 ↗
31. S.L. Semiatin and T.R. Bieler: Acta Mater., 2001, vol. 49, pp. 3565-3573.10.1016/S1359-6454(01)00236-1 ↗
32. D.M. Dimiduk, P.M. Hazzledine, T.A. Parthasarathy, M.G. Mendiratta, and S. Seshagiri: Metall. Mater. Trans. A, 1998, vol. 29, pp. 37-47.10.1007/s11661-998-0157-3 ↗
33. S. Kar, T. Searles, E. Lee, G. Viswanathan, H. Fraser, J. Tiley, and R. Banerjee: Metall. Mater. Trans. A, 2006, vol. 37, pp. 559-566.10.1007/s11661-006-0028-8 ↗
34. Y. Zhang, Y.S. Sato, H. Kokawa, S.H.C. Park, and S. Hirano: Mater. Sci. Eng. A, 2008, vol. 485, pp. 448-455.10.1016/j.msea.2007.08.051 ↗
35. D.G. Lee, S. Lee, C.S. Lee, and S. Hur: Metall. Mater. Trans. A, 2003, vol. 34, pp. 2541-2548.10.1007/s11661-003-0013-4 ↗
36. Z.Z. Fang, P. Sun, and H. Wang: Adv. Eng. Mater., 2012, vol. 14, pp. 383-387.10.1002/adem.201100269 ↗
37. A.P. Singh, F. Yang, R. Torrens, and B. Gabbitas: Mater. Sci. Eng. A, 2017, vol. 712, pp. 157-165.10.1016/j.msea.2017.11.098 ↗
38. I. Sen, S. Tamirisakandala, D. Miracle, and U. Ramamurty: Acta Mater., 2007, vol. 55, pp. 4983-4993.10.1016/j.actamat.2007.05.009 ↗
39. Q. Zhang, J. Chen, Z. Qi, X. Lin, H. Tan, and W. Huang: Metall. Mater. Trans. A, 2018, vol. 49, pp. 3651-3662.10.1007/s11661-018-4695-z ↗
40. B. Baufeld, O. Van der Biest, and R. Gault: Mater. Des., 2010, vol. 31, pp. S106-S111.10.1016/j.matdes.2009.11.032 ↗
41. C. Sauer and G. Luetjering: J. Mater. Proces. Technol., 2001, vol. 117, pp. 311-317.10.1016/S0924-0136(01)00788-9 ↗
42. K. Maruyama, R. Yamamoto, H. Nakakuki, and N. Fujitsuna: Mater. Sci. Eng. A, 1997, 239, pp. 419-428.10.1016/S0921-5093(97)00612-6 ↗