journal article·2018-05

Kinetic Investigation and Wear Properties of Fe2B Layers on AISI 12L14 Steel

M. Keddam, M. Ortiz-Dominguez, M. Elias-Espinosa, A. Arenas-Flores, J. Zuno-Silva, D. Zamarripa-Zepeda, O. A. Gomez-Vargas

Publisher page

Abstract

In the current study, the powder-pack boriding was applied to the AISI 12L14 steel in the temperature range 1123 K to 1273 K for an exposure time between 2 and 8 hours. The produced boride layer was composed of Fe2B with a sawtooth morphology. A diffusion model based on the integral method was applied to investigate the growth kinetics of Fe2B layers. As a main result, the boron diffusion coefficients in Fe2B were estimated by considering the principle of mass balance at the (Fe2B/substrate) interface with an inclusion of boride incubation times. The value of activation energy for boron diffusion in AISI 12L14 steel was estimated as 165 kJ mol−1 and compared with other values of activation energy found in the literature. An experimental validation of the present model was made by using four different boriding conditions. Furthermore, the Rockwell-C adhesion test was employed to assess the cohesion of boride layers to the base metal. The scratch and pin-on-disc tests were also carried out to analyze the effect of boriding on wear behavior of AISI 12L14 steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. A.K. Sinha: J. Heat Treat., 1991, vol. 4, pp. 437–47.
2. I. Campos-Silva, M. Ortiz-Domínguez, O. Bravo-Bárcenas, M.A. Doñu-Ruiz, D. Bravo-Bárcenas, C. Tapia-Quintero, and M.Y. Jiménez-Reyes: Surf. Coat. Technol., 2010, vol. 205, pp. 403–12.10.1016/j.surfcoat.2010.06.068 ↗
3. M. Kulka, N. Makuch, A. Pertek, and L. Małdziński: J. Solid State Chem., 2013, vol. 199, pp. 196–203.10.1016/j.jssc.2012.12.029 ↗
4. I. Campos-Silva, M. Flores-Jiménez, D. Bravo-Bárcenas, H. Balmori-Ramírez, J. Andraca-Adame, J. Martínez-Trinidad, and J.A. Meda-Campaña: Surf. Coat. Technol., 2017, vol. 309, pp. 155–63.10.1016/j.surfcoat.2016.11.054 ↗
5. I. Campos, R. Torres, G. Ramírez, R. Ganem, and J. Martínez: Appl. Surf. Sci., 2006, vol. 252, pp. 8662–67.10.1016/j.apsusc.2005.12.002 ↗
6. C.I. VillaVelázquez-Mendoza, J.L. Rodríguez-Mendoza, V. Ibarra-Galván, R.P. Hodgkins, A. López-Valdivieso, L.L. Serrato-Palacios, A.L. Leal-Cruz, and V. Ibarra-Junquera: Int. J. Surf. Sci. Eng., 2014, vol. 8, pp. 71–91.10.1504/IJSURFSE.2014.059315 ↗
7. I. Campos, M. Islas, G. Ramírez, C. VillaVelázquez, and C. Mota: Appl. Surf. Sci., 2007, vol. 253, pp. 6226–31.10.1016/j.apsusc.2007.01.070 ↗
8. I. Campos, M. Islas, E. González, P. Ponce, and G. Ramírez: Surf. Coat. Technol., 2006, vol. 201, pp. 2717–23.10.1016/j.surfcoat.2006.05.016 ↗
9. K. Genel, I. Ozbek, A. Kurt, and C. Bindal: Surf. Coat. Technol., 2002, vol. 160, pp. 38–43,10.1016/S0257-8972(02)00400-0 ↗
10. R.D. Ramdan, T. Takaki, and Y. Tomita: Mater. Trans., 2008, vol. 49, pp. 2625–31.10.2320/matertrans.MRA2008158 ↗
11. M. Elias-Espinosa, M. Ortiz-Domínguez, M. Keddam, O.A. Gómez-Vargas, A. Arenas-Flores, F.R. Barrientos-Hernández, R. West Anthony, and C. Sinclair Derek: Surf. Eng., 2015, vol. 31, pp. 588–97.10.1179/1743294415Y.0000000065 ↗
12. R. Kouba, M. Keddam, and M. Kulka: Surf. Eng., 2015, vol. 31, pp. 563–69.10.1179/1743294414Y.0000000357 ↗
13. M. Keddam, M. Elias-Espinosa, M. Ortiz-Domínguez, I. Simón-Marmolejo, and J. Zuno-Silva: Int. J. Surf. Sci. Eng., 2017, vol. 11, pp. 563–85.10.1504/IJSURFSE.2017.088997 ↗
14. F. Leon-Cazares, A. Jimenez-Ceniceros, J. Oseguera-Pena, and F. Castillo-Aranguren: Rev. Mex. Fıs., 2014, vol. 60, pp. 257–68.
15. C.M. Brakman, A.W.J. Gommers, and E.J. Mittemeijer: J. Mater. Res., 1989, vol. 4, pp. 1354–70.10.1557/JMR.1989.1354 ↗
16. L.G. Yu, X.J. Chen, K.A. Khor, and G. Sundararajan: Acta Mater., 2005, vol. 53, pp. 2361–68.10.1016/j.actamat.2005.01.043 ↗
17. H. Okamoto: J. Phase Equilib. Diff., 2004, vol. 25, pp. 297–98.10.1007/s11669-004-0128-3 ↗
18. Z. Nait Abdellah, R. Chegroune, M. Keddam, B. Bouarour, L. Haddour, and A. Elias: Def. Diff. Forum, 2012, vol. 322, pp. 1–9.10.4028/www.scientific.net/DDF.322.1 ↗
19. M.G. Krukovich, B.A. Prusakov, and I.G. Sizov: The Components and Phases of Systems ‘Boron-Iron’ and ‘Boron-Carbon-Iron,’ Chapter Plasticity of Boronized Layers, Springer Series in Materials Science, vol. 237, Springer, New York, 2016, pp. 13–21.10.1007/978-3-319-40012-9_3 ↗
20. T.R. Goodman: Adv. Heat Transfer, 1964, vol. 1, pp. 51–122.10.1016/S0065-2717(08)70097-2 ↗
21. I. Campos-Silva, D. Bravo-Bárcenas, A. Meneses-Amador, M. Ortiz-Dominguez, H. Cimenoglu, U. Figueroa-López, and R. Tadeo-Rosas: Surf. Coat. Technol., 2013, vol. 237, pp. 402–14.10.1016/j.surfcoat.2013.06.083 ↗
22. N. Vidakis, A. Antoniadis, and N. Bilalis: J. Mater Process Technol., 2003, vols. 143–144, pp. 481–85.10.1016/S0924-0136(03)00300-5 ↗
23. S. Taktak: Mater. Des., 2007, vol. 28, pp. 1836–43.10.1016/j.matdes.2006.04.017 ↗
24. O.A. Gómez-Vargas, M. Keddam, and M. Ortiz-Domínguez: High Temp. Mater. Process., 2017, vol. 36, pp. 197–208.10.1515/htmp-2015-0199 ↗
25. M. Ortiz-Domínguez, O.A. Gómez-Vargas, M. Keddam, A. Arenas-Flores, and J. García-Serrano: Prot. Met. Phys. Chem. Surf., 2017, vol. 53, pp. 534–47.10.1134/S2070205117030169 ↗
26. D.N. Tsipas and S.A. Tsipas: Encyclopedia of Iron, Steel, and Their Alloys, R. Coals and G.E. Totten, eds., CRC Press, New York, 2015, pp. 376–400.10.1081/E-EISA-120049849 ↗
27. C. Badini and D. Mazza: J. Mater. Sci., 1988, vol. 23, pp. 3061–66.10.1007/BF00551274 ↗
28. M. Carbucicchio, L. Bardani, and G. Sambogna: J. Mater. Sci., 1980, vol. 15, pp. 1483–90.10.1007/BF00752129 ↗
29. M. Carbucicchio and G. Palombarini: J. Mater. Sci. Lett., 1987, vol. 6, pp. 1147–49.10.1007/BF01729165 ↗
30. K.H. Habig and R. Chatterjee-Fischer: Tribol. Int., 1981, vol. 14, pp. 209–15.10.1016/0301-679X(81)90043-8 ↗
31. O. Allaoui, N. Bouaouadja, and G. Saindernan: Surf. Coat. Technol., 2006, vol. 201, pp. 3475–82.10.1016/j.surfcoat.2006.07.238 ↗
32. B.R. Lawn: J. Am. Ceram. Soc., 1998, vol. 81, pp. 1977–1994.10.1111/j.1151-2916.1998.tb02580.x ↗
33. S. Sen, U. Sen, and C. Bindal: Surf. Coat. Technol., 2005, vol. 191, pp. 274–85.10.1016/j.surfcoat.2004.03.040 ↗
34. Yongfeng Jiang, Yefeng Bao, and Min Wang: Coatings, 2017, vol. 7, p. 61.10.3390/coatings7050061 ↗
35. R. Chegroune, M. Keddam, N. Abdellah, S. Ulker, S. Taktak, and I. Gunes: Mater. Technol., 2016, vol. 50, pp. 263–68.
36. M. Elias-Espinosa, M. Ortiz-Domínguez, M. Keddam, M.A. Flores-Rentería, O. Damián-Mejía, J. Zuno-Silva, J. Hernández-Ávila, E. Cardoso-Legorreta, and A. Arenas-Flores: J. Mater. Eng. Perform., 2014, vol. 23, pp. 2943–52.10.1007/s11665-014-1052-2 ↗
37. M.A. Flores-Rentería, M. Ortiz-Domínguez, M. Keddam, O. Damián-Mejía, M. Elias-Espinosa, M.A. Flores-González, S.A. Medina-Moreno, A. Cruz-Avilés, and M. Villanueva-Ibañez: High Temp. Mater. Process., 2015, vol. 31, pp. 1–11.10.1515/htmp-2014-0004 ↗
38. I. Campos-Silva and M. Ortiz-Dominguez: Int. J. Microstr. Mater. Prop., 2010, vol. 5, pp. 26–38.
39. I. Uslu, H. Comert, M. Ipek, O. Ozdemir, and C. Bindal: Mater. Des., 2007, vol. 28, pp. 55–67.10.1016/j.matdes.2005.06.013 ↗
40. P. Topuz, B. Çiçek, and O. Akar: J. Min. Metall. Sect. B., 2016, vol. 52, pp. 63-68.10.2298/JMMB150301007T ↗
41. I. Gunes and M. Ozcatal: Mater. Technol., 2015, vol. 49, pp. 759-63.