New Experimental Technique for Nodularity and Mg Fading Control in Compacted Graphite Iron Production on Laboratory Scale
Source abstract
Abstract
Abstract The narrow production window for compacted graphite iron material (CGI) drastically reduces the possibilities to produce it in small batches outside an industrial environment. This fact hinders laboratory-scale investigations on CGI solidification. This work presents a solution to that issue by introducing an experimental technique to produce graphitic cast iron of the main three families. Samples of a base hypereutectic spheroidal graphite iron (SGI) were re-melted in a resistance furnace under Ar atmosphere. Varying the holding time at 1723 K (1450 °C), graphitic irons ranging from spheroidal to lamellar were produced. Characterization of the graphite morphology evolution, in terms of nodularity as a function of holding time, is presented. The nodularity decay for the SGI region suggests a linear correlation with the holding time. In the CGI region, nodularity deterioration shows a slower rate, concluding with the sudden appearance of lamellar graphite. The fading process of magnesium, showing agreement with previous researchers, is described by means of empirical relations as a function of holding time and nodularity. The results on nodularity fade and number of nodules per unit area fade suggest that both phenomena occur simultaneously during the fading process of magnesium.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Graphite, nuclear technology, radiation studies · Microstructure and Mechanical Properties of Steels · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. D.M. Stefanescu: Science and Engineering of Casting Solidification, 3rd ed., Springer, Berlin, 2015, pp 446–56.10.1007/978-3-319-15693-4 ↗
2. M. König: Int. J. Cast Met. Res., 2010, vol. 23, pp. 185-192.10.1179/136404609X12535244328378 ↗
3. T. Skaland, Ø. Grong and T. Grong, Metall. Trans. A, 1993, vol. 24, pp. 2321-2345.10.1007/BF02648605 ↗
4. I. Riposan, M Chisamera, S Stan and T Skaland, Int. J. Cast Met. Res., 2003, vol. 16, pp. 105-111.10.1080/13640461.2003.11819567 ↗
5. E. Moumeni, D.M. Stefanescu, N.S. Tiedje, P. Larrañaga and J.H. Hattel, Metall. Mater. Trans. A., 2013, vol. 44, pp. 5134-5146.10.1007/s11661-013-1897-2 ↗
6. J. Tartera, N. Llorca-lsern, M. Marsal and J.L. Rojas, Int. J. Cast Met. Res., 2003, vol. 16, pp. 131-135.10.1080/13640461.2003.11819571 ↗
7. A.N. Roviglione and J.D. Hermida, Metall. Mater. Trans. B, 2004, vol. 35, pp. 313-330.10.1007/s11663-004-0032-6 ↗
8. S.V. Subramanian, D.A.R. Kay and G.R. Purdy, AFS Transactions, 1982, vol. 82, pp. 589-603.
9. D.D. Double and A. Hellawell, Acta Metall. Mater., 1995, vol. 43, pp. 2435-2442.10.1016/0956-7151(94)00416-1 ↗
10. J. Ekengård, A. Diószegi and P.G. Jönsson, Int. J. Metalcast., 2016, vol. 10, pp. 500-515.10.1007/s40962-016-0067-x ↗
11. F. Mampaey, D. Habets, J. Plessers and F. Seutens, Int. Foundry Res., 2008, vol. 60, pp. 2-19.
12. F. Mampaey, D. Habets, J. Plessers and F. Seutens, Int. J. Metalcast., 2010, vol. 4, pp. 25-43.10.1007/BF03355464 ↗
13. S. Dawson: Proceedings 106th AFS Casting Congress, Kansas City, USA, 2002.
14. M. Holtzer, M. Górny and R. Dańko: Microstructure and Properties of Ductile Iron and Compacted Graphite Iron Castings. 1st ed., Springer, New York, 2015, pp. 15–113.10.1007/978-3-319-14583-9_1 ↗
15. R. Suárez, J. Sertucha, P. Larrañaga and J. Lacaze, Metall. Mater. Trans. A, 2016, vol. 47, pp. 2744-2753.10.1007/s11663-016-0750-6 ↗
16. E. Huerta and V. Popovski: AFS Cast Iron Inoculation Conference, Schaumburg, USA, 2005.
17. G. Bylund, H. Bark, B. Fredrikson and T. Thoren, AFS Transactions 1975, vol. 83, pp. 385-392.
18. C.R. Loper Jr, R. W. Heine, C. C. Wang and L. Janowski, AFS Transactions 1977, vol. 84, pp. 203-214.
19. A. SheikhAbdolhossein and M. Nili-Ahmadabadi, Int. J. Cast Met. Res., 2005, vol. 18, pp. 295-300.10.1179/136404605225023126 ↗
20. S. Kim, S. L. Cockcroft and A. M. Omran, J. Alloys Compd., 2009, vol. 476, pp. 728-732.10.1016/j.jallcom.2008.09.082 ↗
21. X. J. Sun, Y. X. Li and X. Chen, J. Mater. Sci. Eng. A, 2007, vol. 466, pp. 1-8.10.1016/j.msea.2007.05.016 ↗
22. R. Lora and A. Diószegi, Metall. Mater. Trans. A, 2012, vol. 43, pp. 5165-5172.10.1007/s11661-012-1244-z ↗
23. J.C. Hernando and A. Diószegi: Advances in the Science and Engineering of Casting Solidification, Springer, 2016, pp. 295–302.10.1007/978-3-319-48117-3_35 ↗
24. J.C. Hernando, E. Ghassemali and A. Diószegi, Mater. Charact., 2017, vol. 131, pp. 492-499.10.1016/j.matchar.2017.07.030 ↗
25. G.F. Vander Voort: Metallography, Principles and Practice, McGraw-Hill, New York, 2007, p. 131.
26. S.C. Murcia, E.A. Ossa and D.J. Celentano, Metall. Mater. Trans. B, 2014, vol. 45, pp. 707-718.10.1007/s11663-013-9979-5 ↗
27. R. Ruxanda and D.M. Stefanescu, Int. J. Cast Met. Res., 2002, vol. 14, pp. 207-216.10.1080/13640461.2002.11819439 ↗
28. K.M. Pedersen and N.S. Tiedje, Mater. Charact., 2008, vol. 59, pp. 1111-1121.10.1016/j.matchar.2007.09.001 ↗
29. ISO: ISO 16112: Compacted (vermicular) graphite cast irons - Classification, ISO, 2006.
30. ASTM: ASTM A247: Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings, ASTM, 2016.
31. ISO: ISO 945: Microstructure of cast irons. Part 1: Graphite classification by visual analysis, ISO, 2008.
32. X.J. Sun, Y.X. Li, and X. Chen, J. Mater. Process. Technol., 2008, vol 200, p. 471-480.10.1016/j.jmatprotec.2007.08.074 ↗
33. A. Diószegi, I.L. Svensson, J. Mater. Sci. Eng. A, 2005, vol. 413-414, p. 474-479.10.1016/j.msea.2005.09.052 ↗
34. D.M. Stefanescu, Int. J. Metalcast., 2015, vol. 9, pp. 7-22.10.1007/BF03355598 ↗
35. SinterCast, Process Control for the Reliable High Volume Production of Compacted Graphite Iron, (SinterCast, 2014). http://sintercast.com/library/technical-publications. Accessed 22 August 2017.