journal article·2017-05

On the Prediction of α-Martensite Temperatures in Medium Manganese Steels

Daniel M. Field, Daniel S. Baker, David C. Van Aken

Publisher page

Abstract

A new composition-based method for calculating the α-martensite start temperature in medium manganese steel is presented and uses a regular solution model to accurately calculate the chemical driving force for α-martensite formation, $$ \Delta G_{\text{Chem}}\gamma \to \alpha $$ . In addition, a compositional relationship for the strain energy contribution during martensitic transformation was developed using measured Young’s moduli (E) reported in literature and measured values for steels produced during this investigation. An empirical relationship was developed to calculate Young’s modulus using alloy composition and was used where dilatometry literature did not report Young’s moduli. A comparison of the $$ \Delta G_{\text{Chem}}\gamma \to \alpha $$ normalized by dividing by the product of Young’s modulus, unconstrained lattice misfit squared (δ 2), and molar volume (Ω) with respect to the measured α-martensite start temperatures, $$ M_{\text{S}}\alpha $$ , produced a single linear relationship for 42 alloys exhibiting either lath or plate martensite. A temperature-dependent strain energy term was then formulated as $$ \Delta G_{\text{str}}\gamma \to \alpha \left( {{\text{J}}/{\text{mol}}} \right) = E\varOmega \delta2 (14.8 - 0.013T) $$ , which opposed the chemical driving force for α-martensite formation. $$ M_{\text{S}}\alpha $$ was determined at a temperature where $$ \Delta G_{\text{Chem}}\gamma \to \alpha + \Delta G_{\text{str}}\gamma \to \alpha = 0 $$ . The proposed $$ M_{\text{S}}\alpha $$ model shows an extended temperature range of prediction from 170 K to 820 K (−103 °C to 547 °C). The model is then shown to corroborate alloy chemistries that exhibit two-stage athermal martensitic transformations and two-stage TRIP behavior in three previously reported medium manganese steels. In addition, the model can be used to predict the retained γ-austenite in twelve alloys, containing e-martensite, using the difference between the calculated $$ M_{\text{S}}\varepsilon $$ and $$ M_{\text{S}}\alpha $$ .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Q. Li, X. Huang, and W. Huang, Met. Sci. Eng., 2016 vol. 662, pp. 129-13510.1016/j.msea.2016.03.042 ↗
2. D.C. Van Aken, S.T. Pisarik, and M.C. McGrath: Proceedings of the Intl. Symp. on New Developments in Advanced High-Strength Steels, Vail, Colorado. 2013. pp. 119–29.
3. [3] M.C. McGrath, D.C. Van Aken, N.I. Medvedeva, and J.E. Medvedeva, Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4634-4643.10.1007/s11661-013-1820-x ↗
4. S.T. Pisarik, D.C. Van Aken, K. Limmer, and J.E. Medvedeva: AIST2014 Proceedings, pp. 3013–23
5. [5] A.J. Clark, J.G. Speer, M.K. Miller, R.E. Hackenberg, D.V. Edmonds, D.K. Matlock, F.C. Rizzo, K.D. Clarke, and E. De Moor, Acta Materialia, 2008, vol. 56, pp. 16-2210.1016/j.actamat.2007.08.051 ↗
6. [6] M.J. Santofimia, L. Zhao, and J. Sietsma, Met Trans A, 2011, vol. 42A, pp.3620-362610.1007/s11661-011-0706-z ↗
7. [7] E. De Moor, S. Lacroix, A.J. Clark, J. Penning, and J.G. Speer, Met Trans A., 2008, Vol.39A, pp.2586-259510.1007/s11661-008-9609-z ↗
8. O. Grassel, G. Frommeyer, C. Derder, and H. Hofmann: J. Phys., 1997, vol. 7, pp. 383–88.10.1051/jp4:1997560 ↗
9. [9] D. M. Field, D.C. Van Aken, Met Trans A., 2016 vol. 47A pp.1912-191710.1007/s11661-016-3394-x ↗
10. [10] M. Acet, T. Schneider, B. Gehrmann, and E.F. Wasserman, Journal De Physique., 1995, Vol 5, pp. 379-384
11. [11] A. Holden, J.D. Bolton, and E.R. Petty, Journal of Iron and Steel Inst., 1971, vol. 209, pp.721-728
12. [12] N.I Medvedeva, M.S Park, D.C. Van Aken, and J.E. Medvedeva, J. Alloys Compd., 2014, vol. 582, pp. 475-48210.1016/j.jallcom.2013.08.089 ↗
13. [13] G.R. Speich, A.J. Schwoeble, and W.C. Leslie, Met. Trans., 1972 vol. 3 pp. 2031-203710.1007/BF02643211 ↗
14. [14] B.C. De Cooman and J.G. Speer, “Austenite Decomposition in Fe-C-X Alloy Systems,” Fundamentals of Steel Product Physical Metallurgy, 1st Edition, ASM International, Materials Park, OH, 2011, p. 173
15. [15] Z. Jicheng, and J. Zhanpeng, Acta Metall. Mater., 1990, vol. 38, pp. 425-43110.1016/0956-7151(90)90148-A ↗
16. [16] V. Raghavan and D. Anita, Metall. Mater. Trans A, 1996, vol. 27A, pp. 1127-113210.1007/BF02649781 ↗
17. [17] K.W. Andrews, J. Iron Steel Inst., 1965, vol 203, pp. 721-727
18. [18] A. Stromvinter, A. Borgenstam, and J. Ågren, Met. Trans. A, 2012, vol. 43A pp. 3870-387910.1007/s11661-012-1171-z ↗
19. M. Palumbo, Computer Coupling of Phase Diagram and Thermochemistry, 2008, pp. 693–708.10.1016/j.calphad.2008.08.006 ↗
20. G.B. Olson and M. Cohen: Met. Trans. A, 1976, vol. 7, pp. 1905-1914
21. G.B. Olsen and M. Cohen: Met Trans A, 1976, vol. 7 pp. 1897-1904
22. [20] S.T. Pisarik and D.C. Van Aken, Met Trans A., 2016, vol. 47A pp1009-101810.1007/s11661-015-3265-x ↗
23. [23] M. Grujicic, G. B. Olson and W. S. Owen, Metall. Trans A., 1985, vol. 16A, 1713-2210.1007/BF02670359 ↗
24. [24] L. Kaufman, and M. Cohen, Progr. Metal. Phy. 1958, vol. 7, pp. 165-24610.1016/0502-8205(58)90005-4 ↗
25. [25] J.S. Bowles and A.J. Morton, Acta Metall., 1964, vol. 12, p.629-3710.1016/0001-6160(64)90035-5 ↗
26. [26] J.F. Breedis and L. Kaufman, Metall. Trans., 1971, vol. 2, pp. 2359-237110.1007/BF02814874 ↗
27. [27] Y.K.Lee and C.S.Choi, Metall. Mater. Trans A, 2000, vol. 31A, pp. 355-36010.1007/s11661-000-0271-3 ↗
28. [28] S. Allain, J.P. Chateau, O. Bouaziz, S. Migot, and N. Guelton, Mater. Sci. Eng. A, 2004, vols. 387-389, pp. 158-16210.1016/j.msea.2004.01.059 ↗
29. [29] W.S. Yang, and C.M. Wan, J. Mater. Sci., 1990, vol. 25, pp. 1821-182310.1007/BF01045392 ↗
30. S.T. Pisarik, MS thesis, Missouri University of Science and Technology 2014.
31. [31] L. Kaufman: CALPHAD, 1978, vol. 2, pp. 295-318.10.1016/0364-5916(78)90018-4 ↗
32. [32] L. Kaufman: CALPAHD, 1979, vol. 3, pp. 45-76.10.1016/0364-5916(79)90020-8 ↗
33. [33] L. Kaufman: CALPHAD, 1978, vol. 2, pp. 325-48.10.1016/0364-5916(78)90020-2 ↗
34. [34] L. Kaufman: CALPHAD, 1978, vol. 2, pp. 117-46.10.1016/0364-5916(78)90031-7 ↗
35. [35] A. T.Disndale SGTE Data for pure elements, CALPHAD, 1991, vol. 15, pp. 317-425.10.1016/0364-5916(91)90030-N ↗
36. ASTM E 8/E 8M-08, Standard Test Methods for Tension Testing of Metallic Materials
37. [37] S. Martin, C. Ullrich, D. Simek, U. Martin, and D. Rafaja, J. Appl. Crystallogr., 2011, vol. 44, pp. 779-78710.1107/S0021889811019558 ↗
38. [38] U.R. Lenel and B.R. Knott, Met Trans A., 1987, vol. 18A, pp. 767-77510.1007/BF02646919 ↗
39. [39] M.C. Somani, D.A. Porter, L.P. Karjalainen, and R.D.K. Misra, Met Trans A., 2014, vol. 45A, pp. 1247-125710.1007/s11661-013-2053-8 ↗
40. [40] K. Tsuzaki, S. Fukasaku, Y. Tomota, and T. Maki. Mater Transaction. 1991, vol. 32, pp. 222-22810.2320/matertrans1989.32.222 ↗
41. [41] S. Cotes, M. Sade, and A. F. Guillermet, Met Trans A., 1995, vol. 26A, pp. 1957-196910.1007/BF02670667 ↗
42. Q.X. Dai, X.N. Cheng, Y.T. Zhao, X.M. Lou, and Z.Z. Yuan: Mater. Charact., 2004, vol. 52, pp. 349-35410.1016/j.matchar.2004.06.008 ↗
43. [43] S. Lee, and B.C. De Cooman, Met Trans A., 2016, vol. 47A, pp. 3263-327010.1007/s11661-016-3507-6 ↗
44. [44] G.Ghosh and G.B. Olson, Acta Materialia, 2002, Vol. 50, pp. 2655-267510.1016/S1359-6454(02)00096-4 ↗
45. [45] Takeuchi S. J. Phys. Soc. Jpn. 1969, Vol 27, 92910.1143/JPSJ.27.929 ↗
46. [46] G. Ghosh and G.B. Olson, Acta Materialia, 1993,Vol. 42, pp.3361-337010.1016/0956-7151(94)90468-5 ↗
47. [47] S. T. Pisarik, and D. C. Van Aken, Met Trans A., 2014, vol. 45, pp. 3173-317810.1007/s11661-014-2303-4 ↗
48. M. Atkins: Atlas of continuous cooling transformation diagrams for engineering steels, ASM, (1980)
49. E. Yang, H. Zurob, and J. McDermid: Proc. of MS&T’10, 2010, pp. 438–46
50. [50] J-C. Kim, D-W. Han, S-H. Baik, and Y-K Lee, Mater. Sci. & Eng., 2004, vol. 378 pp. 323-32710.1016/j.msea.2003.11.075 ↗
51. [51] K.R. Limmer, J.E. Medvedeva, D.C. Van Aken, and N.I. Medvedeva Computational Materials Science, 2015, vol. 99, pp. 253-25510.1016/j.commatsci.2014.12.015 ↗
52. [52] P.R. Swann: Corrosion, 1963, vol. 19, p. 102.10.5006/0010-9312-19.3.102 ↗
53. [53] R.E. Schramm and R.P. Reed: Metall. Trans. A, 1975, vol. 6, p. 134510.1007/BF02641927 ↗
54. [54] L.M. Kaputkina, V.G. Prokoshkina, and N.A. Krysina: Metals, 2001, vol. 6, p. 80.
55. [55] T. De Cock, C. Capdevila, F.G. Caballero, and C. Garcia de Andres, Scripta Materiallia, 2006, vol. 54 pp.949-95410.1016/j.scriptamat.2005.10.052 ↗
56. [56] H.S. Yang, J.H. Jang, H.K.D.H. Bhadeshia, and D.W. Suh, CALPHAD, 2012, vol. 36, pp. 16-2210.1016/j.calphad.2011.10.008 ↗
57. [57] J.H. Jun and C.S. Choi, Mater. Sci. Eng. A 1998, vol. 257, pp. 535-55610.1016/S0921-5093(98)00994-0 ↗
58. [58] S Takaki, H Nakatsu, and T Tokunaga: Mater. Trans. JIM, 1993, vol. 34, pp. 489–95.10.2320/matertrans1989.34.489 ↗
59. [59] P.Y. Volosevich, V.N. Gridnev, and Y.N. Petrov: Phys. Met. Metallogr., 1975, vol. 40, pp. 554–59.