journal article·2016-01Open access

Microstructure and Texture Evolution During Symmetric and Asymmetric Rolling of a Martensitic Ti-6Al-4V Alloy

Qi Chao, Peter D. Hodgson, Hossein Beladi

Abstract

In the current study, the effect of deformation mode (i.e., symmetric vs asymmetric rolling) on the extent of grain refinement and texture development in Ti-6Al-4V was examined through warm rolling of a martensitic starting microstructure. During rolling, the initial martensitic lath structure was progressively fragmented, primarily through continuous dynamic recrystallization. This eventually led to an ultrafine-grained (UFG) microstructure composed of equiaxed grains with a mean size of 180 to 230 nm, mostly surrounded by high-angle grain boundaries. Depending on the rolling reduction and deformation mode (symmetric and asymmetric), the rolled specimens displayed different layer morphologies throughout the specimen thickness: a fully UFG surface layer, a partial UFG transition layer, and a partially fragmented lath interior layer. Due to a higher level of effective strain and continuous rotation of the principle axis, asymmetric rolling resulted in a greater extent of grain refinement compared with symmetric rolling at a given thermomechanical condition. A bulk UFG structure was successfully obtained using 70 pct asymmetric rolling. In addition, the rolling texture exhibited various characteristics throughout the thickness due to a different combination of shear and compressive strains. Principally, the basal texture component was displaced from the normal toward rolling direction during asymmetric rolling, differing from the symmetric rolling textures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Titanium Alloys Microstructure and Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. L.R. Saitova, H.W. Höppel, M. Göken, I.P. Semenova and R.Z. Valiev: Int. J. Fatigue, 2009, vol. 31, pp. 322-31.10.1016/j.ijfatigue.2008.08.007 ↗
2. A.V. Sergueeva, V.V. Stolyarov, R.Z. Valiev and A.K. Mukherjee: Mater. Sci. Eng. A, 2002, vol. 323, pp. 318-25.10.1016/S0921-5093(01)01384-3 ↗
3. Y. Estrin and A. Vinogradov: Acta Mater., 2013, vol. 61, pp. 782-817.10.1016/j.actamat.2012.10.038 ↗
4. Y.G. Ko, W.S. Jung, D.H. Shin and C.S. Lee: Scripta Mater., 2003, vol. 48, pp. 197-202.10.1016/S1359-6462(02)00356-1 ↗
5. S. Zherebtsov, A. Mazur, G. Salishchev and W. Lojkowski: Mater. Sci. Eng. A, 2008, vol. 485, pp. 39-45.10.1016/j.msea.2007.08.081 ↗
6. S.V. Zherebtsov, G.A. Salishchev, R.M. Galeyev, O.R. Valiakhmetov, S.Y. Mironov and S.L. Semiatin: Scripta Mater., 2004, vol. 51, pp. 1147-51.10.1016/j.scriptamat.2004.08.018 ↗
7. N. Tsuji and T. Maki: Scripta Mater., 2009, vol. 60, pp. 1044-49.10.1016/j.scriptamat.2009.02.028 ↗
8. D. Yang, P. Cizek, P.D. Hodgson and C.E. Wen: Scripta Mater., 2010, vol. 62, pp. 321-24.10.1016/j.scriptamat.2009.11.036 ↗
9. S. Zherebtsov, E. Kudryavtsev, S. Kostjuchenko, S. Malysheva and G. Salishchev: Mater. Sci. Eng. A, 2012, vol. 536, pp. 190-96.10.1016/j.msea.2011.12.102 ↗
10. Q. Chao, P.D. Hodgson and H. Beladi: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 2659-71.10.1007/s11661-014-2205-5 ↗
11. C.H. Park, J.H. Kim, J.T. Yeom, C.S. Oh, S.L. Semiatin and C.S. Lee: Scripta Mater., 2013, vol. 68, pp. 996-99.10.1016/j.scriptamat.2013.02.055 ↗
12. H. Matsumoto, L. Bin, S.H. Lee, Y. Li, Y. Ono and A. Chiba: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 3245-60.10.1007/s11661-013-1655-5 ↗
13. I. Weiss, F.H. Froes, D. Eylon and G.E. Welsch: Metall. Trans. A, 1986, vol. 17A, pp. 1935-47.10.1007/BF02644991 ↗
14. T. Seshacharyulu, S.C. Medeiros, J.T. Morgan, J.C. Malas and W.G. Frazier: Scripta Mater., 1999, vol. 41, pp. 283-88.10.1016/S1359-6462(99)00163-3 ↗
15. S.L. Semiatin, V. Seetharaman and I. Weiss: Mater. Sci. Eng. A, 1999, vol. 263, pp. 257-71.10.1016/S0921-5093(98)01156-3 ↗
16. C.H. Park, Y.G. Ko, J.W. Park and C.S. Lee: Mater. Sci. Eng. A, 2008, vol. 496, pp. 150-58.10.1016/j.msea.2008.05.001 ↗
17. S.L. Semiatin and T.R. Bieler: Acta Mater., 2001, vol. 49, pp. 3565-73.10.1016/S1359-6454(01)00236-1 ↗
18. E.B. Shell and S.L. Semiatin: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3219-29.10.1007/s11661-999-0232-4 ↗
19. S.I. Oh, S.L. Semiatin and J.J. Jonas: Metall. Trans. A, 1992, vol. 23A, pp. 963-75.10.1007/BF02675571 ↗
20. D. Orlov, A. Pougis, R. Lapovok, L.S. Toth, I.B. Timokhina, P.D. Hodgson, A. Haldar and D. Bhattacharjee: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4346-59.10.1007/s11661-013-1791-y ↗
21. M.H. Cai, S. Singh Dhinwal, Q.H. Han, Q. Chao and P.D. Hodgson: Mater. Sci. Eng. A, 2013, vol. 583, pp. 205-09.10.1016/j.msea.2013.06.076 ↗
22. K.H. Kim and D.N. Lee: Acta Mater., 2001, vol. 49, pp. 2583-95.10.1016/S1359-6454(01)00036-2 ↗
23. J. Sidor, A. Miroux, R. Petrov and L. Kestens: Acta Mater., 2008, vol. 56, pp. 2495-5507.10.1016/j.actamat.2008.01.042 ↗
24. B. Beausir, S. Biswas, D.I. Kim, L.S. Tóth and S. Suwas: Acta Mater., 2009, vol. 57, pp. 5061-77.10.1016/j.actamat.2009.07.008 ↗
25. X. Huang, K. Suzuki, A. Watazu, I. Shigematsu and N. Saito: Mater. Sci. Eng. A, 2008, vol. 488, pp. 214-20.10.1016/j.msea.2007.11.029 ↗
26. M. Diot, J.J. Fundenberger, M.J. Philippe, J. Wégria and C. Esling: Scripta Mater., 1998, vol. 39, pp. 1623-30.10.1016/S1359-6462(98)00363-7 ↗
27. Z. Li, L. Fu, B. Fu and A. Shan: Mater. Sci. Eng. A, 2012, vol. 558, pp. 309-18.10.1016/j.msea.2012.08.005 ↗
28. S. Zaefferer: Mater. Sci. Eng. A, 2003, vol. 344, pp. 20-30.10.1016/S0921-5093(02)00421-5 ↗
29. O. Engler and V. Randle: Introduction to Texture Analysis : Macrotexture, Microtexture, and Orientation Mapping, 2nd ed., Taylor and Francis, Hoboken, 2009.10.1201/9781420063660 ↗
30. Y.N. Wang and J.C. Huang: Mater. Chem. Phys., 2003, vol. 81, pp. 11-26.10.1016/S0254-0584(03)00168-8 ↗
31. P. Ari-Gur and S.L. Semiatin: Mater. Sci. Eng. A, 1998, vol. 257, pp. 118-27.10.1016/S0921-5093(98)00829-6 ↗
32. M. Peters and G. Lütjering: Proc. of 4th Int. Conf. on Titanium, Kyoto, Japan, H. Kimura and O. Izumi, eds., TMS-AIME, Warrendale, PA, 1980, pp. 925–35.
33. K. Morii, H. Mecking, G. Lütjering and Y. Nakayama: Scripta Metall., 1986, vol. 20, pp. 1795-800.10.1016/0036-9748(86)90291-7 ↗
34. M.J. Philippe, C. Esling and B. Hocheid: Texture Microstruct., 1988, vol. 7, pp. 265-301.10.1155/TSM.7.265 ↗
35. M.J. Philippe, M. Serghat, P. Van Houtte and C. Esling: Acta Metall. Mater., 1995, vol. 43, pp. 1619-30.10.1016/0956-7151(94)00329-G ↗
36. D. Dunst, R. Dendievel and H. Mecking: Mater. Sci. Forum, 1994, vol. 157-162, pp. 665-72.10.4028/www.scientific.net/MSF.157-162.665 ↗
37. G.C. Obasi, S. Birosca, D.G. Leo Prakash, K. Quinta da Fonseca and M. Preuss: Acta Mater., 2012, vol. 60, pp. 6013-24.10.1016/j.actamat.2012.07.025 ↗
38. S. Roy and S. Suwas: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 3303-21.10.1007/s11661-013-1672-4 ↗
39. M. Peters, A. Gysler and G. Lütjering: Metall. Trans. A, 1984, vol. 15A, pp. 1597-1605.10.1007/BF02657799 ↗
40. M.A.W. Lowden and W.B. Hutchinson: Metall. Trans. A, 1975, vol. 6A, pp. 441-48.10.1007/BF02658401 ↗
41. H. Mecking and D. Dunst: Mater. Sci. Eng. A, 1994, vol. 175, pp. 55-62.10.1016/0921-5093(94)91045-6 ↗
42. H. Beladi, Q. Chao and G.S. Rohrer: Acta Mater., 2014, vol. 80, pp. 478-89.10.1016/j.actamat.2014.06.064 ↗
43. N. Stanford and P.S. Bate: Acta Mater., 2004, vol. 52, pp. 5215-24.10.1016/j.actamat.2004.07.034 ↗
44. G.C. Obasi, S. Birosca, J. Quinta da Fonseca and M. Preuss: Acta Mater., 2012, vol. 60, pp. 1048-58.10.1016/j.actamat.2011.10.038 ↗
45. S.B. Kang, B.K. Min, H.W. Kim, D.S. Wilkinson and J. Kang: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3141-49.10.1007/s11661-005-0085-4 ↗
46. P.J. Hurley, B.C. Muddle and P.D. Hodgson: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1507-17.10.1007/s11661-001-0238-z ↗
47. H. Beladi, G.L. Kelly and P.D. Hodgson: Int. Mater. Rev., 2007, vol. 52, pp. 14-28.10.1179/174328006X102538 ↗
48. T.R. Bieler and S.L. Semiatin: Int. J. Plast., 2002, vol. 18, pp. 1165-89.10.1016/S0749-6419(01)00057-2 ↗
49. M.A. Imam and C.M. Gilmore: Metall. Trans. A, 1983, vol. 14A, pp. 233-40.10.1007/BF02651620 ↗
50. W.F. Hosford and R.M. Caddell: Metal Forming: Mechanics and Metallurgy, 4th ed., Cambridge University Press, Cambridge, 2011.10.1017/CBO9780511976940 ↗