Influence of Pulse Parameters on Characteristics of Bead-on-Plate Weld Deposits of Aluminum and Its Alloy in the Pulsed Gas Metal Arc Welding Process
Source abstract
Abstract
A summarized influence of pulse parameters have been studied; these parameters are defined by a hypothetically derived factor ϕ = [(I b /I p )ft b ] on the characteristics of bead-on-plate weld deposits of aluminum and Al-Mg alloy, with respect to their geometry and microstructure. The weld geometry has been studied in reference to the depth, width, and area of fusion of the base plate, and the bead height, bead width, toe angle, form factor, area of weld deposit, fraction of base metal fusion per unit mass of weld deposition, and dilution. It is found that these aspects of geometry and the microstructure of the weld metal and heat-affected zone (HAZ) vary significantly with a change in the factor ϕ. The value of the factor ϕ at approximately 0.1 has been seen as critical to the change in the different aspects of the pulsed–gas metal arc (P-GMA) weld. It is also found that, at a given ϕ, the variation in mean current and heat input significantly affects the geometry and microstructure of the weld deposit.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. P.K. Ghosh, B.K. Rai: ISIJ Int., 1996, vol. 36, pp. 1036–4510.2355/isijinternational.36.1036 ↗
2. P.K. Ghosh, L. Dorn: Trans. IIM, 1994, vol. 47, pp. 401–08
3. P.K. Ghosh, P.C. Gupta, V.K. Goyal: Weld. J., 1998, vol. 77, pp. 307–312s
4. H.S. Randhawa, P.K. Ghosh, S.R. Gupta: ISIJ Int., 1998, vol. 38, pp. 276–8410.2355/isijinternational.38.276 ↗
5. P.K. Ghosh, B.K. Rai: Ind. Weld. J., 1998, vol. 31, pp. 30–3910.22486/iwj.v31i4.177643 ↗
6. P.K. Ghosh, S.R. Gupta, H.S. Randhawa: Int. J. Join. Mater., 1999, vol. 11, pp. 99–110
7. P.K. Ghosh: Int. J. Join. Mater., 1996, vol. 8, pp. 157–61
8. P.K. Ghosh, H.M. Hussain: Int. J. Join. Mater., 2002, vol. 41, pp. 16–26
9. P.K. Ghosh, P.C. Gupta, N.K. Jain: Aluminium, 1988, vol. 64, pp. 933–35
10. P.K. Ghosh, P.C. Gupta, N.K. Jain: Ind. Weld. J., 1989, vol. 21, pp. 550–58
11. P.K. Ghosh, S.R. Gupta, P.C. Gupta, R. Rathi: Mater. Trans., JIM, 1990, vol. 31, pp. 723–2910.2320/matertrans1989.31.723 ↗
12. H.S. Randhawa, P.K. Ghosh, S.R. Gupta: ISIJ Int., 2000, vol. 40, pp. 71–7610.2355/isijinternational.40.71 ↗
13. P.K. Ghosh, H.S. Randhawa, S.R. Gupta: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2247–5910.1007/s11661-000-0142-y ↗
14. P.K. Ghosh, L. Dorn: Int. J. Join. Mater., 1993, vol. 5, pp. 143–50
15. P.K. Ghosh, S.R. Gupta, H.S. Randhawa: Int. J. Join. Mater., 2000, vol. 12, pp. 76–85
16. P.K. Ghosh, L. Dorn, S.F. Goecke: Int. J. Join. Mater., 2001, vol. 13, pp. 40–47
17. P.K. Ghosh: Int. Weld. Conf. on Welding and Allied Technology, Indian Institute of Welding, New Delhi, India, 1999, pp. 18–27
18. V.K. Goyal, P.K. Ghosh, and J.S. Saini: J. Mater. Process. Technol., 2008, in press
19. P.K. Ghosh, A.K. Ghosh: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1–6
20. J. Cornu: Advanced Welding System, vol. 2, IFS Publication, Ltd., Kempston, Bedford, United Kingdom, 1988, pp. 127–65.
21. D.N. Shackleton, W. Lucas: Weld. J., 1974, vol. 53 (12), pp. 537s–547s
22. K. Easterling: Introduction to Physical Metallurgy of Welding, Butterworth Publications, London, 1985, pp. 49–59
23. P. Harrison, F. Roy: Met. Constr., 1987, vol. 19 (7), pp. 392R–399R
24. J.F. Lancaster: Metallurgy of Welding, Allen and Unwin, Ltd., London, 1987, pp. 144–229
25. R.E. Reed-Hill: Physical Metallurgy Principles, Affiliated East-West Press Pvt. Ltd., New Delhi, India, 1973, pp. 480–610
26. V.K. Goyal, P.K. Ghosh, J.S. Saini: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1794–180510.1007/s11661-007-9217-3 ↗
27. A.V. Petrov, V.I. Birman: Svar. Proiz., 1968, vol. 6, pp. 1–2
28. P.K. Ghosh, V.K. Goyal, H.K. Dhiman, M. Kumar: Sci. Technol. Weld. Join., 2006, vol. 11, pp. 232–4210.1179/174329306X89251 ↗