journal article·2004-11

A micromechanical analysis of the yielding behavior of individual widmanstätten colonies of an α + β titanium alloy

Kwai S. Chan

Publisher page

Abstract

The yielding behavior of individual Widmanstatten α (hcp) + β (bcc) colonies of Ti-8Al-1Mo-1V has been analyzed theoretically by considering the shearing of β platelets by slip in the α phase. Slip is assumed to initiate in the softer α phase and impinges on the harder β platelets. Under the combined actions of the external stress and impinging slip, yielding of the β platelets occurs when the von Mises effective stress in the β phase exceeds a critical value. The theoretical analysis indicates that the macroscopic slip planes in individual Widmanstatten colonies correspond to those that induce the highest stresses in the β platelets. In addition, the yield stress and the strain-hardening rate both increase with decreasing values of the angle, β b , between the slip direction and the normal to the β platelets, resulting in soft and hard slip orientations. Soft orientation of the lamellar colony is associated with α slip parallel to the macroscopic, serrated α/β interface, which includes crystallographic interface and ledges, while the hard orientation is associated with slip normal to the thin platelets. This slip anisotropy appears to arise from increasing difficulty of slip transmission across the macroscopic α/β interface when the operative slip vector impinges perpendicular to the β platelets.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. J.W. Martin: Micromechanisms in Particle-Hardened Alloys, Cambridge University Press, Cambridge, United Kingdom, 1980.
2. J.W. Hutchinson and R.M. McMeeking: in Fundamentals of Metal-Matrix Composites, S. Suresh, A. Mortensen, and A. Needleman, eds., Butterworth-Heinemann, Boston, MA, 1993, pp. 158–73.10.1016/B978-0-08-052371-2.50013-4 ↗
3. T.S. Cook, C.A. Rau, and E. Smith: ASME Trans., J. Eng. Mater. Technol., 1975, vol. 97, pp. 1–10.10.1115/1.3443254 ↗
4. K. Wakashima and T.H. Courtney: Phil. Mag., 1980, vol. 42 (1), pp. 47–62.10.1080/01418618008239355 ↗
5. Y.Q. Sun: Mater. Sci. Eng., 1997, vols. A239–A240, pp. 131–36.10.1016/S0921-5093(97)00571-6 ↗
6. R.M. Jones: Mechanics of Composite Materials, McGraw-Hill, New York, NY, 1975, pp. 72–83.
7. Stephen W. Tsai: in Fundamental Aspects of Fiber Reinforced Plastic Composites, R.T. Schwartz and H.S. Schwartz, eds., Wiley Interscience, New York, NY, 1968, pp. 3–11.
8. R. Hill: The Mathematical Theory of Plasticity, Oxford University Press, London, 1950.
9. K.S. Chan, C.C. Wojcik, and D.H. Koss: Metall. Trans. A, 1981, vol. 12A, pp. 1899–1907.10.1007/BF02643801 ↗
10. S. Ankem and H. Margolin: Metall. Trans. A, 1980, vol. 11A, pp. 963–72.10.1007/BF02654710 ↗
11. S. Suri, G.B. Viswanathan, T. Neeraj, D.-H. Hou, and M.J. Mills: Acta Mater., 1999, vol. 47, pp. 1019–34.10.1016/S1359-6454(98)00364-4 ↗
12. S. Suri, S.L. Semiatin, and M.J. Mills: S. L. Semiatin, Air Force Research Laboratory, Wright-Patterson AFB, Dayton, OH; S. Suri and M.J. Mills, Department of Materials Science and Engineering, The Ohio State University, Columbus, OH. private communication, 2002.
13. T. Furuhara, J.M. Howe, and H.I. Aaronson: Acta Metall. Mater., 1991, vol. 39, pp. 2873–86.10.1016/0956-7151(91)90104-9 ↗
14. T. Furuhara and H.I. Aaronson: Acta Metall. Mater., 1991, vol. 39, pp. 2857–72.10.1016/0956-7151(91)90103-8 ↗
15. M.F. Savage, J. Tatalovich, M.D. Uchic, M. Zapan, K.J. Hemker, and M.J. Mills: Mater. Sci. Eng., 2001, vols. A319–A321, pp. 398–403.10.1016/S0921-5093(01)01024-3 ↗
16. H. Inui, M.H. Oh, A. Nakamura, and M. Yamaguchi: Acta Metall., 1992, vol. 40, pp. 3095–3104.10.1016/0956-7151(92)90472-Q ↗
17. Y.G. Zhang, Z.N. He, Q. Xu, C.Q. Chen, and M.C. Chaturvedi: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 283–90.
18. B.K. Kad, M. Dao, and R.J. Asaro: Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1995, vol. 364, pp. 1169–74.
19. M. Dao, B.K. Kad, and R.J. Asaro: Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1995, vol. 364, pp. 1029–34.
20. T.H. Courtney: Proc. Conf. on In-Situ Composites, Xerox, Lexington, MA, 1976, p. 529.
21. C.N. Reid: Deformation Geometry of Material Scientists. Pergamon Press, Oxford, United Kingdom, 1973, pp. 146–47.
22. F.C. Philips: An Introduction to Crystallography, John Wiley & Sons, New York, NY, 1963, pp. 181–90.
23. N.P. Suh and A.P.L. Turner: Elements of the Mechanical Behavior of Solids, McGraw-Hill, New York, NY, 1975, pp. 119–123.
24. S. Ankem and H. Hargolin: Metall. Trans. A, 1986, vol. 17A, pp. 2209–26.10.1007/BF02645919 ↗
25. E.S. Fisher and C.J. Renken: Phys. Rev., 1964, vol. 135, pp. A482-A494; also R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, John Wiley & Sons, New York, NY, 1976, pp. 8–9.10.1103/PhysRev.135.A482 ↗
26. E.S. Fisher and D. Dever: in The Science, Technology and Application of Titanium, R.I. Jaffee and N.E. Promisel, eds., Pergamon Press, New York, NY, 1970, pp. 373–81; also D.L. Davidson: Mater. Sci. Eng., 2000, vol. A293, pp. 281–91.10.1016/B978-0-08-006564-9.50047-6 ↗
27. U. Dahmen: Acta Metall., 1982, vol. 30, pp. 63–73.10.1016/0001-6160(82)90045-1 ↗
28. D.S. Shih, F.S. Lin, and E.A. Starke, Jr.: in Titanium Science and Technology, G. Lηterjing, V. Zwicker, and W. Bunk, eds., Deutsche Gesellschaft für Metallkunde e.V., Munich, 1985, pp. 2259–66.
29. F.S. Lin, E.A. Starke, Jr., S.B. Chakrabortty, and A. Gysler: Metall. Trans. A, 1984, vol. 15A, pp. 1229–46 and 1873–81.10.1007/BF02644717 ↗
30. D.M. Bowden and E.A. Starke, Jr.: Metall. Trans. A, 1984, vol. 15A, pp. 1687–98.10.1007/BF02666352 ↗
31. E.O. Hall: Proc. Phys. Soc., London, Sect. B, 1951, vol. 64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
32. M.J. Petch: Iron Steel Inst., 1953, vol. 174, pp. 25–28.