Impulse Excitation Internal Friction Study of Dislocation and Point Defect Interactions in Ultra-Low Carbon Bake-Hardenable Steel
Source abstract
Abstract
The simultaneous presence of interstitial solutes and dislocations in an ultra-low carbon bake-hardenable steel gives rise to two characteristic peaks in the internal friction (IF) spectrum: the dislocation-enhanced Snoek peak and the Snoek–Ke–Koster peak. These IF peaks were used to study the dislocation structure developed by the pre-straining and the static strain aging effect of C during the bake-hardening process. A Ti-stabilized interstitial-free steel was used to ascertain the absence of a γ-peak in the IF spectrum of the deformed ultra-low carbon steel. The analysis of the IF data shows clearly that the bake-hardening effect in ultra-low carbon steel is entirely due to atmosphere formation, with the dislocation segment length being the main parameter affecting the IF peak amplitude. Recovery annealing experiments showed that the rearrangement of the dislocation structure lead to the elimination of the C atmosphere.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Bordoni, P.G. (1949) Ric. Sci., 19(7), 851–62.
2. A. Seeger and W. Wasserbach: Mater. Tech., 2003, vols. 7–8–9, pp. 51–61.
3. Brunner, D., Diehl, J. (1991) Phys. Status Solidi (A) 124, pp. 155–70.10.1002/pssa.2211240114 ↗
4. Brunner, D., Diehl, J. (1991) Phys. Status Solidi (A), 124, pp. 455–64.10.1002/pssa.2211240210 ↗
5. Brunner, D., Diehl, J. (1991) Phys. Status Solidi (A), 124, pp. 203-16.10.1002/pssa.2211250117 ↗
6. Seeger, A. (2004) Mater. Sci. Eng. A, 370 (1-2), pp. 50-66.10.1016/j.msea.2003.08.072 ↗
7. Hahn, G.T. (1962) Acta Metall., 10 (8), pp. 727-38.10.1016/0001-6160(62)90041-X ↗
8. Lee, S.-J., Kim, J., Kane, S.N., De Cooman, B.C., (2011) Acta Mater., 59 (17), pp. 6809-19.10.1016/j.actamat.2011.07.040 ↗
9. Brown, R.A., (1982) Can. J. Phys. 60, p. 766.10.1139/p82-106 ↗
10. Tanaka, K., Watanabe, T (1972) Jpn. J. Appl. Phys. 11(10), 1429–39.10.1143/JJAP.11.1429 ↗
11. Yoshikawa, A., Okamoto, M., (1967) J. Phys. Soc. Jpn. 22 pp.996–1004.10.1143/JPSJ.22.996 ↗
12. Karolik, A.S., Luhvich, A.A. (1994) J. Phys. Condens. Matter, 6 (4), pp. 873-86.10.1088/0953-8984/6/4/007 ↗
13. Basinski, Z.S., Dugdale, J.S., Howie, A., (1963) Philos. Mag., 8 pp.1989–97.10.1080/14786436308209092 ↗
14. Nowick, A.S., Berry, B.S. (1972) Anelastic Relaxation in Crystalline Solids. New York: Academic Press.
15. Fuoss, R.M., Kirkwood J.G. (1952) J. Am. Chem. Soc., 63, pp. 385–94.10.1021/ja01847a013 ↗
16. Eloot, K., Dilewijns, J. (1997) ISIJ Int., 37 (6), pp. 610-14.10.2355/isijinternational.37.610 ↗
17. Eloot, K., Kestens, L., Dilewijns, J. (1997) ISIJ Int., 37 (6), pp. 615-22.10.2355/isijinternational.37.615 ↗
18. H. Saitoh, N. Yoshinaga, K. Ushioda, and O. Akisue: Collected Abstract of the 1991 Meeting of JIM, 1991, p. 97.
19. Swartz, J.G. (1969) Acta Metall., 17 (12), pp. 1511-15.10.1016/0001-6160(69)90014-5 ↗
20. Saitoh, H., Ushioda, K. (1993) Mater. Trans. JIM 34 (1), pp. 13-19.10.2320/matertrans1989.34.13 ↗
21. M. Weller, M. Feuerbacher, J. Diehl, and K. Urban: J. Phys. Paris, IV, 1996, vol. 6, pp. C8-239–C8-242.10.1051/jp4:1996851 ↗
22. De, A.K., Vandeputte, S., De Cooman, B.C. (2001) Scripta Materialia, 44 (4), pp. 695-701.10.1016/S1359-6462(00)00638-2 ↗
23. Leslie, W.C. (1961) Acta Metall., 9 (11), pp. 1004-22.10.1016/0001-6160(61)90244-9 ↗
24. A.H. Cottrell and B.A. Bilby: Proc. Phys. Soc. Sect. A, 1949, vol. 62 (1), art. no. 308, pp. 49–62.10.1088/0370-1298/62/1/308 ↗
25. Mecking, H., Kocks, U.F. (1981) Acta Metall., 29 (11), pp. 1865-75.10.1016/0001-6160(81)90112-7 ↗
26. Estrin, Y., Kubin, L.P. (1986) Acta Metall., 34 (12), pp. 2455-64.10.1016/0001-6160(86)90148-3 ↗
27. V. Hivert, P. Groh, P. Moser, and W. Frank: Phys. Status Solidi (A) Appl. Res., 1977, vol. 42 (2), pp. 511–18.10.1002/pssa.2210420212 ↗
28. Pal-val, P.P., Natsik, V.D., Kadeckova, S. (1988) Phys Status Solidi A 105: K37-K40.10.1002/pssa.2211050143 ↗
29. H. Mizubayashi, H. Kronmüller, and A. Seeger: Le J. Phys. Colloques, 1985, vol. 46 (C10), pp. 309–12.10.1051/jphyscol:19851069 ↗
30. Shimada, M., Sakamoto, K. (1979) Scripta Metall., 13 (12), pp. 1177-82.10.1016/0036-9748(79)90278-3 ↗
31. L. Magalas and S. Gorczyca: Le J. Phys. Colloques, 1985, vol. 46 (C10), pp. 253–56.10.1051/jphyscol:19851057 ↗
32. Magalas, L. and K. Ngai (1997). ASTM Spec. Tech. Publ. 1304, pp.189–203.
33. Koster, W., Bangert, L., Hahn, R. (1954) Arch. Eisenhutt 25 pp. 569-78.
34. Mura, T., Tamura, I., Brittain, J. O. (1961) J. Appl. Phys. 32(1) pp. 92-96.10.1063/1.1735966 ↗
35. Chambers, R., Schultz, J., (1961) Phys. Rev. Lett. 6(6), pp. 273-75.10.1103/PhysRevLett.6.273 ↗
36. McGrath, J., Rawlings R.,(1966) Acta Metall. 14(1), pp.1-4.10.1016/0001-6160(66)90264-1 ↗
37. Surin, A.I., Blanter, M.S. (1970) Fiz Metall. Metall. 29(1), pp.199-201.
38. A. Seeger and C. Wutrich: iL Nuovo Cimento, 1976, vol. 33B, pp. 38–74.10.1007/BF02722472 ↗
39. A. Seeger: J. Phys., 1981, vol. 42 (C5), pp. C5–C201.10.1051/jphyscol:1981531 ↗
40. Chen, L.-Q., Wang, C.-Y., Yu, T. (2008) Chin. Phys. B, 17 (2), pp. 662-68.10.1088/1674-1056/17/2/050 ↗
41. T.D. Swinburne, S.L. Dudarev, S.P. Fitzgerald, M.R. Gilbert, and A.P. Sutton: Phys. Rev. B Condens. Matter Mater. Phys., 2013, vol. 87 (6), art. no. 064108.10.1103/PhysRevB.87.064108 ↗
42. L. Ventelon, F. Willaime, and P. Leyronnas: J. Nucl. Mater., 2009, vol. 386–388 (C), pp. 26–29.10.1016/j.jnucmat.2008.12.053 ↗
43. Itakura, M., Kaburaki, H., Yamaguchi, M. (2012) Acta Mater., 60 (9), pp. 3698-710.10.1016/j.actamat.2012.03.033 ↗
44. L. Proville, L. Ventelon, and D. Rodney: Phys. Rev. B Condens. Matter Mater. Phys., 2013, vol. 87 (14), art. no. 144106.10.1103/PhysRevB.87.144106 ↗
45. Wen, M., Fukuyama, S., Yokogawa, K. (2003) Acta Mater., 51 (6), pp. 1767-73.10.1016/S1359-6454(02)00575-X ↗
46. Spitzig, W.A., Keh, A.S. (1970) Acta Metall., 18 (9), pp. 1021-33.10.1016/0001-6160(70)90058-1 ↗
47. Sato, A., Meshii, M. (1973) Acta Metall., 21 (6), pp. 753-68.10.1016/0001-6160(73)90040-0 ↗
48. Schoek, G. (1965) Phys. Rev., 102, pp. 1458–59.10.1103/PhysRev.102.1458 ↗
49. A. Seeger, M. Weller, J. Diehl, Z.I. Pan, J.X. Zhang, and T.S. Ke: Z. Metall., 1982, vol. 73, p. 1–20.10.1515/ijmr-1982-730101 ↗
50. Schoeck, G. (1963), Acta Metall., Vol.11, pp. 617–22.10.1016/0001-6160(63)90096-8 ↗
51. Seeger, A. (1979), Phys. Status Solidi (A), Vol.55, pp.457–68.10.1002/pssa.2210550213 ↗
52. Schoek, G. (1982), Scripta Metall., vol. 10, pp. 233–39.10.1016/0036-9748(82)90342-8 ↗
53. Seeger, A. (1982), Scripta Metall., Vol. 10, pp. 241–47.10.1016/0036-9748(82)90343-X ↗
54. K.L. Ngai, Y.-N. Wang, and L.B. Magalas: J. Alloys Compd., 1994, vols. 211–212 (C), pp. 327–32.10.1016/0925-8388(94)90513-4 ↗
55. Jung, I., De Cooman, B.C. (2012) Diffus. Defect Data B Solid State Phenom., 184, pp. 209-14.10.4028/www.scientific.net/SSP.184.209 ↗
56. G. Gremaud: Mechanical Spectroscopy Q-1 2001, R. Schaller, G. Fantozzi, and G. Gremaud, eds., Trans Tech Publications, Uetikon-Zuerich, 2001, pp. 178–247.
57. R.G.A. Veiga, M. Perez, C.S. Becquart, and C. Domain: J. Phys. Condens. Matter, 2013, vol. 25 (2), art. no. 025401.10.1088/0953-8984/25/2/025401 ↗
58. Wilde, J., Cerezo, A., Smith, G.D.W. (2000) Scripta Mater., 43 (1), pp. 39-48.10.1016/S1359-6462(00)00361-4 ↗
59. Clouet, E., Garruchet, S., Nguyen, H., Perez, M., Becquart, C.S. (2008) Acta Materialia, 56 (14), pp. 3450-60.10.1016/j.actamat.2008.03.024 ↗