journal article·2006-03

First-principles computations of mechanical properties of Ni2Cr and Ni2Mo

K. S. Chan, Y. -D. Lee, Y. -M. Pan

Publisher page

Abstract

Nickel-based alloys are being considered for use as the outer container of the waste package for the disposal of high-level nuclear waste. During fabrication processes and long-term storage, Ni-based alloy outer containers can undergo microstructural changes due to the formation of Ni2Cr, Ni2Mo, and Ni2(Cr, Mo), which are ordered orthorhombic (oI6) phases whose mechanical properties are unknown because of fabrication difficulties. To circumvent the experimental limitation, a first-principles quantum-mechanical code based on the full-potential linearized augmented plane-wave (FLAPW) method was used to compute the elastic constants and the theoretical stress-strain curves of Ni2Cr and Ni2Mo. The theoretical mechanical properties were then correlated with charge-density distributions of the stressed oI6 unit cell to identify the critical conditions at the onset of fracture. Using first-principles results as material input, the unstable stacking energy and the Peierls-Nabarro (P-N) barrier energy were computed and used to estimate the tensile ductility and fracture toughness of Ni2Cr and Ni2Mo. The influences of the elastic anisotropy and slip vector on dislocation mobility in Ni2Cr and Ni2Mo are identified and contrasted to those in MoSi2 with a tetragonal (tI6) crystal structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · High Temperature Alloys and Creep · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. ANL-EBS-MD-000002, Rev. 1, Bechtel SAIC Company LLC, Las Vegas, NV, 2003.
2. M. Hirabayashi, M. Koiwa, K. Tanaka, T. Tadaki, T. Saburi, S. Nenno, and H. Nishiyama: Trans. JIM, 1969, vol. 10, pp. 365–71.10.2320/matertrans1960.10.365 ↗
3. L. Karmazin, J. Krejčí, and J. Zeman: Mater. Sci. Eng., 1994, vol. A183, pp. 103–04.10.1016/0921-5093(94)90894-X ↗
4. E. Gozlan, M. Bamberger, S.-F. Dirnfeld, B. Prinz, and J. Klodt: Mater. Sci. Eng., 1991, vol. A141, pp. 85–95.10.1016/0921-5093(91)90712-V ↗
5. A.K. Sinha: Proc. Mater. Sci., 1972, vol. 15, pp. 79–185.
6. L. Kaufman, P.E.A. Turchi, W. Huang, and Z.-K. Liu: CALPHAD, 2001, vol. 25, pp. 419–33.10.1016/S0364-5916(01)00061-X ↗
7. K.S. Chan, Y.-M. Pan, and Y.-D. Lee: Southwest Research Institute, San Antonio, TX, unpublished research, 2005.
8. P.E.A. Turchi: in Intermetallic Compounds Principles and Practice, J.H. Westbrook and R.L. Fleischer, eds., John Wiley & Sons, NY, 1995, vol. 1, pp. 21–54.
9. L.Y.E. Popov and E.K. Kozlov: Phys. Met. Metall., 1964, vol. 18 (1), pp. 102–06.
10. W.E. Clayton and C.R. Brooks: J. Mater., 1970, vol. 5, pp. 157–68.
11. A. Ahktar and E. Teghtsoonian: Metall. Trans., 1971, vol. 2, pp. 2737–63.
12. N. Clément and P. Coulomb: Phil. Mag., 1974, vol. 30, pp. 663–64.10.1080/14786439808206589 ↗
13. N. Clément, D. Caillard, and J.L. Martin: Acta Metall., 1984, vol. 32, pp. 961–75.10.1016/0001-6160(84)90034-8 ↗
14. Y.E. Popov, E.V. Kozlov, N.M. Matreyeva, and I.A. Tsukanova: Phys. Met. Metall., 1967, vol. 23 (4), pp. 189–91.
15. C.L. Fu: J. Mater. Res., vol. 5, 1990, pp. 971–79.10.1557/JMR.1990.0971 ↗
16. A. Anton and P.C. Schmidt: Intermetallics, 1997, vol. 5, pp. 449–65.10.1016/S0966-9795(97)00017-4 ↗
17. M. Šob, L.G. Wang, and V. Vitek: Mater. Sci. Eng., 1997, vols. A234–A236, pp. 1075–78.10.1016/S0921-5093(97)00329-8 ↗
18. M. Šob, M. Fráck, D. Legut, J. Fiala, and V. Vitek: Mater. Sci. Eng., vols. A387–A389, 2004, pp. 148–57.10.1016/j.msea.2003.10.376 ↗
19. M. Fráck, M. Šob, and V. Vitek: Phys. Rev. B, 2003, vol. 68, p. 184101.10.1103/PhysRevB.68.184101 ↗
20. A. T. Paxton, P. Gumbsch, and M. Methfessel: Phil. Mag. Lett., 1992, vol. 63, pp. 267–74.10.1080/09500839108214654 ↗
21. D. Roundy, C.R. Krenn, M.L. Cohen, and J.W. Morris, Jr.: Phil. Mag. A, 2001, vol. 81, pp. 1725–47.10.1080/01418610010007902 ↗
22. D.M. Clatterbuck, C.R. Krenn, M.L. Cohen, and J.W. Morris, Jr.: Phys. Rev. Lett., 2003, vol. 91, p. 135501.10.1103/PhysRevLett.91.135501 ↗
23. J. Pokluda, M. Černý, P. Šandera, and M. Šob: Int. J. Computer-Aided Materials Design, 2004, vol. 11, pp. 1–28.10.1007/s10820-004-4567-2 ↗
24. P. Blaha, K. Schwarz, P. Sorantin, and S.B. Trickey: Comput Phys. Comm., 1990, vol. 59, pp. 399–415.10.1016/0010-4655(90)90187-6 ↗
25. P. Blaha, K. Schwarz, G. Madsen, D. Kvasnicka and J. Luitz: WIEN2K User’s Guide, Vienna University of Technology, Vienna, 2001.
26. P. Villars: Pearson’s Handbook Desk Edition, ASM INTERNATIONAL, Materials Park, OH, 1997, p. 2412; refer also to Crystal Lattice Structure: http://cst-www/nrl.navy.mil, 2004.
27. P. Nash: in Binary Alloy Phase Diagrams, 2nd ed., T.B. Massalski, ed., ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 2, pp. 1289–1302.
28. J.P. Perdew, S. Burke, and M. Ernzerhof: Phys Rev. Lett., 1996, vol. 77, pp. 3865–68.10.1103/PhysRevLett.77.3865 ↗
29. Y. Wang: Penn State University, State College, PA, private communication, 2004.
30. A. Arya, G.K. Dey, V.K. Vasudevan, and S. Banerjee: Acta Mater., 2002, vol. 50, pp. 3301–15.10.1016/S1359-6454(02)00093-9 ↗
31. Y. Wang, C. Woodward, S.H. Zhou, Z.-K. Liu, and L.-Q. Chen: Scripta Mater., 2005, vol. 52, pp. 17–20.10.1016/j.scriptamat.2004.09.007 ↗
32. P.E.A. Turchi, L. Kaufman, and Z.-K. Liu: Mater. Sci. Soc. Symp. Proc., MRS, Pittsburg, PA, 2003, vol. 757, pp. II4.3.1-II4.3.6.
33. J.F. Nye: Physical Properties of Crystals, Clarendon Press, Oxford, United Kingdom, 1957, pp. 131–58.
34. M. Nakamura: Intermetallic Principles and Practice, John Wiley & Sons, NY, 1995, vol. 1, pp. 873–93.
35. K. Panda and K.S. Ravichandran: WIEN2K Workshop, Penn State University, State College, PA, July 12–15, 2004.
36. L.F. Mattheiss: Phys. Rev. B, 1991, vol. 43 (14), pp. 12549–55.10.1103/PhysRevB.43.12549 ↗
37. G. Bester and M. Fähnle: J. Phys. Condens. Matter, 2001, vol. 13, pp. 11541–50 and 11551-65.10.1088/0953-8984/13/50/313 ↗
38. J.W. Christian and V. Vitek: Rep. Progr. Phys., 1970, vol. 33, pp. 307–411.10.1088/0034-4885/33/1/307 ↗
39. J.R. Rice: J. Mech. Phys. Solids, 1992, vol. 40, pp. 239–71.10.1016/S0022-5096(05)80012-2 ↗
40. R.E. Peierls: Proc. Phys. Soc., 1998, vol. 52, pp. 34–37.10.1088/0959-5309/52/1/305 ↗
41. F.R.N. Nabarro: Proc. Phys. Soc., 1947, vol. 49, pp. 236–394.
42. K.S. Chan: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2475–87.10.1007/s11661-001-0037-6 ↗
43. A.J.E. Foreman: Acta Metall., 1955, vol. 3, pp. 322–30.10.1016/0001-6160(55)90036-5 ↗
44. J.N. Wang: Mater. Sci. Eng. A, 1995, vol. A205, pp. 259–69.
45. J.N. Wang: Acta Mater., 1995, vol. 44, pp. 1541–46.10.1016/1359-6454(95)00273-1 ↗
46. D.L. Davidson: Mater. Sci. Eng., 2000, vol. A293, pp. 281–91.10.1016/S0921-5093(00)01023-6 ↗
47. D.L. Davidson: Mater. Sci. Eng., 2003, vol. A357, pp. 203–18.10.1016/S0921-5093(03)00162-X ↗
48. K.S. Chan: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2315–28.10.1007/s11661-003-0295-6 ↗
49. K. Ito, H. Inui, Y. Shirai, and M. Yamaguchi: Phil. Mag. A, 1995, vol. 72, pp. 1075–97.10.1080/01418619508239954 ↗
50. K. Tanaka, H. Inui, M. Yamaguchi, and M. Koiwa: Mater. Sci. Eng., 1999, vol. A261, pp. 158–64.10.1016/S0921-5093(98)01061-2 ↗
51. U.V. Waghmare, E. Kaxiras, V. V. Bulatov, and M.S. Duesberry: Modelling Simul. Mater. Sci. Eng., 1998, vol. 6, pp. 493–506.10.1088/0965-0393/6/4/013 ↗