Effect of Environment on Fatigue Crack Wake Dislocation Structure in Al-Cu-Mg
Source abstract
Abstract
Fatigue-induced dislocation structure was imaged at the crack surface using transmission electron microscopy (TEM) of focused ion beam (FIB)-prepared cross sections of naturally aged Al-4Cu-1.4Mg stressed at a constant stress intensity range (7 MPa√m) concurrent with either ultralow (~10−8 Pa s) or high-purity (50 Pa s) water vapor exposure at 296 K (23 °C). A 200-to-600-nm-thick recovered-dislocation cell structure formed adjacent to the crack surface from planar slip bands in the plastic zone with the thickness of the cell structure and slip bands decreasing with increasing water vapor exposure. This result suggested lowered plastic strain accumulation in the moist environment relative to the vacuum. The previously reported fatigue crack surface crystallography is explained by the underlying dislocation substructure. For a vacuum, \( \left\{ { 1 1 1} \right\} \) facets dominate the crack path from localized slip band cracking without resolvable dislocation cells, but cell formation causes some off-\( \left\{ { 1 1 1} \right\} \) features. With water vapor present, the high level of hydrogen trapped within the developed dislocation structure could promote decohesion manifest as either low-index \( \left\{ { 100} \right\} \) or \( \left\{ { 1 10} \right\} \) facets, as well as high-index cracking through the fatigue-formed subgrain structure. These features and damage scenario provide a physical basis for modeling discontinuous environmental fatigue crack growth governed by both cyclic strain range and maximum tensile stress.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. J. Petit, J. de Fouquet, and G. Henaff: Handbook of Fatigue Crack Propagation in Metallic Structures, A. Carpinteri, ed., Elsevier, New York, NY, 1994, pp. 1159–204.10.1016/B978-0-444-81645-0.50010-X ↗
2. M.R. Achter: Scripta Metall., 1968, vol. 2, pp. 525–27.10.1016/0036-9748(68)90187-7 ↗
3. F.J. Bradshaw: Scripta Metall., 1967, vol. 1, pp. 41–43.10.1016/0036-9748(67)90011-7 ↗
4. F.J. Bradshaw and C. Wheeler: Int. J. Fract., 1969, vol. 5, pp. 255–68.10.1007/BF00190956 ↗
5. G.H. Bray, R.J. Bucci, and R.L. Brazill: Mater. Sci. Forum, 2000, vols. 331–333, pp. 1413–26.10.4028/www.scientific.net/MSF.331-337.1413 ↗
6. R.P. Gangloff: NACE, R.P. Gangloff and M.B. Ives, eds., NACE, Houston, TX, 1990, pp. 55–109.
7. R.P. Gangloff: Fatigue ‘02, A.F. Blom, ed., Engineering Materials Advisory Services, West Midlands, UK, 2002, pp. 3401–34.
8. C. Gasqueres, C. Sarrazin-Baudoux, and J. Petit: Fatigue ‘06, W.S. Johnson, D.L. McDowell, J.C. Newman Jr., and A. Saxena, eds., Elsevier, Atlanta, GA, 2006, p. FT214.
9. C. Gasqueres, C. Sarrazin-Baudoux, J. Petit, and D. Dumont: Scripta Mater., 2005, vol. 53, pp. 1333–37.10.1016/j.scriptamat.2005.08.036 ↗
10. G. Henaff, K. Marchal, and J. Petit: Acta Metall. Mater., 1995, vol. 43, pp. 2931–42.10.1016/0956-7151(95)00002-D ↗
11. J. Ruiz and M. Elices: Acta Mater., 1997, vol. 45, pp. 281–93.10.1016/S1359-6454(96)00147-4 ↗
12. T.W. Weir, G.W. Simmons, R.G. Hart, and R.P. Wei: Scripta Metall., 1980, vol. 14, pp. 357–64.10.1016/0036-9748(80)90359-2 ↗
13. R.P. Wei, P.S. Pao, R.G. Hart, T.W. Weir, and G.W. Simmons: Metall. Trans. A, 1980, vol. 11A, pp. 151–58.10.1007/BF02700451 ↗
14. R.P. Wei, M. Gao, and P.S. Pao: Scripta Metall., 1984, vol. 18, pp. 1195–98.10.1016/0036-9748(84)90104-2 ↗
15. R.P. Wei and M. Gao: Scripta Metall., 1983, vol. 17, pp. 959–62.10.1016/0036-9748(83)90270-3 ↗
16. R.P. Wei and R.P. Gangloff: Fracture Mechanics: Perspectives and Directions. Twentieth Symposium, R.P. Wei and R.P. Gangloff, eds., American Society for Testing Materials, Philadelphia, PA, 1989, pp. 233–64.10.1520/STP1020-EB ↗
17. R.P. Wei: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25, pp. 845–54.10.1046/j.1460-2695.2002.00551.x ↗
18. R.P. Wei: Eng. Fract. Mech., 1970, vol. 1, pp. 633–51.10.1016/0013-7944(70)90004-4 ↗
19. T.H. Shih and R.P. Wei: Eng. Fract. Mech., 1983, vol. 18, pp. 827–37.10.1016/0013-7944(83)90127-3 ↗
20. P.S. Pao, M. Gao, and R.P. Wei: Basic Question in Fatigue, R.P. Wei and R.P. Gangloff, eds., ASTM International, Philadelphia, PA, 1988, pp. 182–95.
21. P.S. Pao, M. Gao, and R.P. Wei: Scripta Metall., 1985, vol. 19A, pp. 265–70.10.1016/0036-9748(85)90310-2 ↗
22. M. Gao, P.S. Pao, and R.P. Wei: Metall. Trans. A, 1988, vol. 19A, pp. 1739–50.10.1007/BF02645142 ↗
23. D.L. Davidson and J. Lankford: Int. Mater. Rev., 1992, vol. 37, pp. 45–76.10.1179/imr.1992.37.1.45 ↗
24. J.R. Scully, G.A. Young, Jr., and S. Smith: Gaseous Hydrogen Embrittlement of Materials in Energy Technologies, R.P. Gangloff and B.P. Somerday, eds., Woodhead Publishing Limited, Cambridge, UK, 2012.
25. S. Lynch: Gaseous Hydrogen Embrittlement of Materials in Energy Technologies, R.P. Gangloff and B.P. Somerday, eds., Woodhead Publishing Limited, Cambridge, UK, 2012.
26. I.M. Robertson, M.L. Martin, and J.A. Fenske: Gaseous Hydrogen Embrittlement of Materials in Energy Technologies, R.P. Gangloff and B.P. Somerday, eds., Woodhead Publishing Limited, Cambridge, UK, 2012.
27. J.M. Papazian, E.L. Anagnostou, S.J. Engel, D. Hoitsma, J. Madsen, R.P. Silberstein, G. Welsh, and J.B. Whiteside: Eng. Fract. Mech., 2009, vol. 76, pp. 620–32.10.1016/j.engfracmech.2008.09.007 ↗
28. Y. Ro, S.R. Agnew, G.H. Bray, and R.P. Gangloff: Mater. Sci. Eng. A, 2007, vols. 468–470, pp. 88–97.10.1016/j.msea.2007.01.155 ↗
29. G.H. Bray, M. Glazov, R.J. Rioja, D. Li, and R.P. Gangloff: Int. J. Fatigue, 2001, vol. 23, pp. S265–76.10.1016/S0142-1123(01)00159-1 ↗
30. V.K. Gupta and S.R. Agnew: Mater. Sci. Eng. A, 2008, vol. 494, pp. 36–46.10.1016/j.msea.2007.09.082 ↗
31. R.A. Oriani: Corrosion, 1987, vol. 43, pp. 390–97.10.5006/1.3583875 ↗
32. C.J. Beevers: Met. Sci., 1977, vol. 11, pp. 362–67.10.1179/msc.1977.11.8-9.362 ↗
33. C.Q. Bowles and D. Broek: Int. J. Fract., 1972, vol. 8, pp. 75–85.10.1007/BF00185199 ↗
34. P.J.E. Forsyth: Acta Metall., 1963, vol. 11, pp. 703–15.10.1016/0001-6160(63)90008-7 ↗
35. G.G. Garrett and J.F. Knott: Acta Metall., 1975, vol. 23, pp. 841–48.10.1016/0001-6160(75)90200-X ↗
36. S.P. Lynch: Corrosion Sci., 1982, vol. 22, pp. 925–37.10.1016/0010-938X(82)90062-2 ↗
37. E.I. Meletis and R.F. Hochman: J. Test. Eval., 1984, vol. 12, pp. 142–48.10.1520/JTE11064J ↗
38. D.A. Meyn: Trans. TMS-AIME, 1968, vol. 61, pp. 42–51.
39. J.L. Nelson and J.A. Beavers: Metall. Trans. A, 1979, vol. 10A, pp. 658–62.10.1007/BF02658333 ↗
40. K.J. Nix and H.M. Flower: Acta Metall., 1982, vol. 30, pp. 1549–59.10.1016/0001-6160(82)90175-4 ↗
41. R.S. Piascik and R.P. Gangloff: Metall. Trans. A, 1993, vol. 24A, pp. 2751–62.10.1007/BF02659499 ↗
42. V. Randle: J. Microscopy, 1999, vol. 195, pp. 226–32.10.1046/j.1365-2818.1999.00577.x ↗
43. V. Randle and C. Hoile: Mater. Sci. Forum, 1998, vols. 273–272, pp. 183–90.10.4028/www.scientific.net/MSF.273-275.183 ↗
44. N. Ranganathan, N. Gerad, A. Tougui, R. Leroy, M. Benguediab, M. Mazari, Y. Nadot, and J. Petit: Nontraditional Methods of Sensing Stress, Strain, Damage in Materials and Structures, G.F. Lucas, P.C. McKeighan, and J.S. Ransom, eds., ASTM, West Conshohocken, PA, 2001, pp. 52–84.
45. Y.J. Ro, S.R. Agnew, and R.P. Gangloff: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1449–65.10.1007/s11661-008-9522-5 ↗
46. Y.J. Ro, S.R. Agnew, and R.P. Gangloff: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 3042–62.10.1007/s11661-007-9344-x ↗
47. Y.J. Ro: M.S. Thesis, University of Virginia, Charlottesville, VA, 2004.
48. Y.J. Ro, S.R. Agnew, and R.P. Gangloff: Fatigue ‘06, W.S. Johnson, D.L. McDowell, J.C. Newman Jr., and A. Saxena, eds., Elsevier, Atlanta, GA, 2006, p. FT 404.
49. D.C. Slavik and R.P. Gangloff: Acta Mater., 1996, vol. 44, pp. 3515–34.10.1016/1359-6454(96)00013-4 ↗
50. D.C. Slavik, J.A. Wert, and R.P. Gangloff: J. Mater. Res., 1993, vol. 8, pp. 2482–91.10.1557/JMR.1993.2482 ↗
51. K.R.L. Thompson and J.V. Craig: Metall. Trans., 1970, vol. 1, pp. 1047–49.10.1007/BF02811800 ↗
52. G. Themelis, S. Chikwembani, and J. Weertman: Mater. Charact., 1990, vol. 24, pp. 27–40.10.1016/1044-5803(90)90069-V ↗
53. A.P. Reynolds and G.E. Stoner: Metall. Trans. A, 1991, vol. 22A, pp. 1849–55.10.1007/BF02646509 ↗
54. C. Fong and D. Tromans: Metall. Trans. A, 1988, vol. 19A, pp. 2765–73.10.1007/BF02645811 ↗
55. R.M.N. Pelloux: Trans. TMS-AIME, 1969, vol. 62, pp. 281–85.
56. A. Brotzu, M. Cavallini, F. Felli, and M. Marchetti: Influence of Corrosion on Fatigue Crack Growth Propagation of Aluminum Lithium Alloys, Fatigue in the Presence of Corrosion, RTO AVT WORK SHOP, NATO report RTO-MP-18 (AC/323(AVT)TP/8), Corfu, Greece, 1998, pp. 8-1–8-12.
57. V.K. Gupta, R.P. Gangloff, and S.R. Agnew: Int. J. Fatigue, 2011, in press.
58. Y.J. Ro, S.R. Agnew, and R.P. Gangloff: 4th Int. Conf. on Very High Cycle Fatigue, J.E. Allison, J.W. Jones, J.M. Larsen, and R.O. Ritchie, eds., TMS-AIME, Warrendale, PA, 2007, pp. 409–20.
59. Y.J. Ro, S.R. Agnew, and R.P. Gangloff: Scripta Mater., 2005, vol. 52, pp. 531–36.10.1016/j.scriptamat.2004.10.040 ↗
60. Y.J. Ro: Ph.D Dissertation, University of Virginia, Charlottesville, VA, 2008.
61. V.K. Gupta and S.R. Agnew: Int. J. Fatigue, 2011, vol. 33, pp. 1159–74.10.1016/j.ijfatigue.2011.01.018 ↗
62. W. Vogel, M. Wilhelm, and V. Gerold: Acta Metall., 1982, vol. 30, pp. 31–35.10.1016/0001-6160(82)90041-4 ↗
63. E.I. Meletis and R.F. Hochman: Corrosion Sci., 1984, vol. 24, pp. 843–62.10.1016/0010-938X(84)90123-9 ↗
64. S.P. Lynch: Int. Conf. on Hydrogen Effects on Materials Behavior and Corrosion Deformation Interactions, N.R. Moody, A.W. Thompson, R. Ricker, G. Was, and R. Jones, eds., TMS, Warrendale, PA, 2002, pp. 449–66.
65. W. Egger, G. Kogel, P. Sperr, W. Triftshauser, J. Bar, S. Rodling, and H.J. Gudladt: Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 317–20.10.1016/j.msea.2004.02.070 ↗
66. W. Egger, G. Kogel, P. Sperr, W. Triftshauser, S. Rodling, J. Bar, and H.J. Gudladt: Appl. Surf. Sci., 2002, vol. 194, pp. 214–17.10.1016/S0169-4332(02)00106-X ↗
67. D.A. Jones, A.F. Jankowski, and G.A. Davidson: Corrosion 97, NACE International, Houston, TX, 1997, p. 188.
68. K.R. Cooper, L.M. Young, R.P. Gangloff, and R.G. Kelly: Mater. Sci. Forum, 2000, vols. 331–333, pp. 1625–33.10.4028/www.scientific.net/MSF.331-337.1625 ↗
69. H.K. Birnbaum, C. Buckley, F. Zeides, E. Sirois, P. Rozenak, S. Spooner, and J.S. Lin: J. Alloys Compd., 1997, vol. 253, pp. 260–64.10.1016/S0925-8388(96)02968-4 ↗
70. H.J. Roven and E. Nes: Acta Metall. Mater., 1991, vol. 39, pp. 1735–54.10.1016/0956-7151(91)90142-N ↗
71. J.P. Hirth: Metall. Trans. A, 1980, vol. 11A, pp. 861–90.10.1007/BF02654700 ↗
72. Y. Mine, T. Tsumagari, and Z. Horita: Scripta Mater., 2010, vol. 63, pp. 552–55.10.1016/j.scriptamat.2010.05.027 ↗
73. Y. Mine, S. Matsumoto, and Z. Horita: Corrosion Sci., 2011, in press.
74. M. Nagumo, T. Ishikawa, T. Endoh, and Y. Inoue: Scripta Mater., 2003, vol. 49, pp. 837–42.10.1016/S1359-6462(03)00469-X ↗
75. K. Katagiri, J. Awatani, K. Koyanagi, Y. Onishi, and M. Tsuji: Metall. Trans. A, 1980, vol. 11A, pp. 2029–32.10.1007/BF02655122 ↗
76. K. Katagiri, J. Awatani, K. Koyanagi, Y. Onishi, and M. Tsuji: Met. Sci., 1980, vol. 14, pp. 485–92.10.1179/030634580790426094 ↗
77. Z.X. Tong and J.P. Bailon: Fatigue Fract. Eng. Mater. Struct., 1995, vol. 18, pp. 847–59.10.1111/j.1460-2695.1995.tb00909.x ↗
78. P. Lukas and L. Kunz: Mater. Sci. Eng., 1984, vol. 62, pp. 149–57.10.1016/0025-5416(84)90216-7 ↗
79. J.C. Grosskreutz and P. Waldow: Acta Metall., 1963, vol. 11, pp. 717–24.10.1016/0001-6160(63)90009-9 ↗
80. W. Vogel, M. Wilhelm, and V. Gerold: Acta Metall., 1982, vol. 30, pp. 21–30.10.1016/0001-6160(82)90040-2 ↗
81. S. Karashima, H. Oikava, and T. Ogura: Trans. Jpn. Inst. Metals, 1968, vol. 3, pp. 205–13.10.2320/matertrans1960.9.205 ↗
82. R.J.H. Wanhill: Metall. Trans. A, 1975, vol. 6A, pp. 1587–96.10.1007/BF02641972 ↗
83. Y. Takahashi, H. Nishikawa, Y. Oda, and H. Noguchi: Mater. Lett., 2010, vol. 64, pp. 2416–19.10.1016/j.matlet.2010.08.019 ↗
84. Y. Takahashi, M. Tanaka, K. Higashida, K. Yamaguchi, and H. Noguchi: Acta Mater., 2010, vol. 58, pp. 1972–81.10.1016/j.actamat.2009.11.040 ↗
85. B.W. Kempshall, L.A. Giannuzzi, B.I. Prenitzer, F.A. Stevie, and S.X. Da: J. Vac. Sci. Technol. B, 2002, vol. 20, pp. 286–90.10.1116/1.1445165 ↗
86. T. Herlihy: M.S. Thesis, University of Virginia, Charlottesville, VA, 2005.
87. J.M. Cairney and P.R. Munroe: Mater. Charact., 2001, vol. 46, pp. 297–304.10.1016/S1044-5803(00)00107-8 ↗
88. J.M. Cairney, P.R. Munroe, and J.H. Schneibel: Scripta Mater., 2000, vol. 42, pp. 473–78.10.1016/S1359-6462(99)00374-7 ↗
89. J.M. Cairney, R.D. Smith, and P.R. Munroe: Microsc. Microanal., 2000, vol. 6, pp. 452–62.10.1007/S100050010048 ↗
90. Y.Z. Huang, S. Lozano-Perez, R.M. Langford, J.M. Titchmarsh, and M.L. Jenkins: J. Microscopy, 2002, vol. 207, pp. 129–36.10.1046/j.1365-2818.2002.01050.x ↗
91. R.M. Langford and A.K. Petford-Long: J. Vac. Sci. Technol., 2001, vol. 19, pp. 2186–93.10.1116/1.1378072 ↗
92. J. Li, T. Malis, and S. Dionne: Mater. Charact., 2006, vol. 57, pp. 64–70.10.1016/j.matchar.2005.12.007 ↗
93. C.A. Volkert and A.M. Minor: MRS Bulletin, 2007, vol. 32, pp. 389–95.10.1557/mrs2007.62 ↗
94. M. Ando, Y. Katoh, H. Tanigawa, and A. Kohyama: J. Nucl. Mater., 1999, vol. 272, pp. 111–14.10.1016/S0022-3115(98)00734-X ↗
95. H.D. Chandler and J.V. Bee: Acta Metall., 1987, vol. 35, pp. 2503–10.10.1016/0001-6160(87)90147-7 ↗
96. G.M. Bond, I.M. Robertson, and H.K. Birnbaum: Acta Metall., 1987, vol. 35, pp. 2289–96.10.1016/0001-6160(87)90076-9 ↗
97. H.K. Birnbaum and P. Sofronis: Mater. Sci. Eng. A, 1994, vol. 176, pp. 191–202.10.1016/0921-5093(94)90975-X ↗
98. P.J. Ferreira, I.M. Robertson, and H.K. Birnbaum: Acta Mater., 1998, vol. 46, pp. 1749–55.10.1016/S1359-6454(97)00349-2 ↗
99. P.J. Ferreira, I.M. Robertson, and H.K. Birnbaum: Acta Mater., 1999, vol. 47, pp. 2991–98.10.1016/S1359-6454(99)00156-1 ↗
100. R.A. Oriani: Stress Corrosion Cracking and Hydrogen Embrittlement of Iron-base Alloys, R.W. Staehle, J. Hochmann, R.D. McCright, and J.E. Slater, eds., NACE, Houston, TX, 1977, pp. 351–57.