journal article·2010-08

Abnormal Grain Growth and Recrystallization in Al-Mg Alloy AA5182 Following Hot Deformation

Jung-Kuei Chang, Ken Takata, Koji Ichitani, Eric M. Taleff

Publisher page

Abstract

Abnormally large grains have been observed in Al-Mg alloy AA5182 sheet material after forming at elevated temperature, and the reduced yield strength that results is a practical problem for commercial hot-forming operations. The process by which abnormal grains are produced is investigated through controlled hot tensile testing to reproduce the microstructures of interest. Abnormal grains are shown to develop strictly during static annealing or cooling following hot deformation; the formation of abnormal grains is suppressed during plastic straining. Abnormal grains grow by static abnormal grain growth (SAGG), which becomes a discontinuous recrystallization process when abnormal grains meet to form a fully recrystallized microstructure. Nuclei, which grow under SAGG, are produced during hot deformation by the geometric dynamic recrystallization (GDRX) process. The mechanism through which a normally continuous recrystallization process, GDRX, may be interrupted by a discontinuous process, SAGG, is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. A. J. Barnes: Mater. Sci. Forum, 1994, vols. 170–172, pp. 701–14.10.4028/www.scientific.net/MSF.170-172.701 ↗
2. A. J. Barnes: Mater. Sci. Forum, 1999, vols. 304–306, pp. 785–96.10.4028/www.scientific.net/MSF.304-306.785 ↗
3. A. J. Barnes: Mater. Sci. Forum, 2001, vols. 357–359, pp. 3–16.10.4028/www.scientific.net/MSF.357-359.3 ↗
4. T. G. Langdon: Mater. Sci. Eng., 2009, vol. 44, pp. 5598–6010.
5. O. D. Sherby and J. Wadsworth: Prog. Mater. Sci., 1989, vol. 33, pp. 169–221.10.1016/0079-6425(89)90004-2 ↗
6. T. G. Langdon: Mater. Sci. Eng., 1991, vol. A137, pp. 1–11.10.1016/0921-5093(91)90312-B ↗
7. M.-A. Kulas, W. P. Green, E. M. Taleff, P. E. Krajewski, and T. R. McNelley: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1249–61.10.1007/s11661-005-0217-x ↗
8. J.G. Schroth: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 9–20.
9. E.M. Taleff, D.R. Lesuer, and J. Wadsworth: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 343–52.10.1007/BF02648411 ↗
10. M. Otsuka, S. Shibasaki, and M. Kikuchi: Mater. Sci. Forum, 1997, vols. 233–234, pp. 193–98.10.4028/www.scientific.net/MSF.233-234.193 ↗
11. E. M. Taleff, G. A. Henshall, T. G. Nieh, D. R. Lesuer, and J. Wadsworth: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1081–91.
12. K. Takata, T. Ohwue, M. Saga, and M. Kikuchi: Mater. Sci. Forum, 2000, vols. 331–337, pp. 631–36.10.4028/www.scientific.net/MSF.331-337.631 ↗
13. E. M. Taleff, P. J. Nevland, and P. E. Krajewski: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1119–30.10.1007/s11661-001-0123-9 ↗
14. T. Ito, S. Shibasaki, M. Koma, and M. Otsuka: J. Inst. Met., 2002, vol. 66, pp. 409–17.10.2320/jinstmet1952.66.4_409 ↗
15. T. Ito, M. Koma, S. Shibasaki, and M. Otsuka: J. Inst. Met., 2002, vol. 66, pp. 476–84.10.2320/jinstmet1952.66.5_476 ↗
16. E.M. Taleff: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 85–94.
17. ASM Staff Writer: Adv. Mater. Processes, 2005, vol. 163, p. 11.
18. H. Kazama, K. Nakao, K. Takata, O. Noguchi, and Y. Suzuki: Proc. 108th Conf. of the Japan Institute of Light Metals (Light Metals Conf. 108th Spring Meeting), Japan Institute of Light Metals, Tokyo, 2005, pp. 61–62.
19. F. Fukuchi, T. Yahaba, H. Akiyama, T. Ogawa, H. Iwasaki, and I. Hori: Honda R&D Tech. Rev., 2004, vol. 16, pp. 23–30.
20. K. Shiotsuki, H. Akiyama, I. Hori, K. Kashiwazaki, and S. Ueno: Proc. 107th Conf. of the Japan Institute of Light Metals (Light Metals Conf. 107th Spring Meeting), Japan Institute of Light Metals, Tokyo, Japan, 2004, pp. 319–20.
21. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier, New York, NY, 2004, p. 3.
22. J.G. Byrne: Recovery, Recrystallization, and Grain Growth, The MacMillian Company, New York, NY, 1965, p. 106.
23. S. Agarwal, P. E. Krajewski, and C. L. Briant. Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1277–89.10.1007/s11661-008-9476-7 ↗
24. D. Doherty, D. A. Hughes, F. J. Humphreys, J. J. Jonas, D. Juul Jensen, M. E. Kassner, W. E. King, T. R. McNelley, H. J. McQueen, and A. D. Rollett: Mater. Sci. Eng., 1997, vol. A238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
25. H.J. McQueen: Development of Dynamic Recrystallization Theory. Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 203–08.10.1016/j.msea.2004.01.064 ↗
26. “Standard Test Methods for Determining Average Grain Size,” Standard Designation E 112–96, ASTM, West Conshohocken, PA, July 1996.
27. O. D. Sherby and P. M. Burke: Progr. Mater. Sci., 1968, vol. 13, pp. 325–90.10.1016/0079-6425(68)90024-8 ↗
28. O. D. Sherby and E. M. Taleff: Mater. Sci. Eng. A, 2002, vol. A322, pp. 89–99.10.1016/S0921-5093(01)01121-2 ↗
29. E. M. Taleff, W. P. Green, M.-A. Kulas, T. R. McNelley, and P. E. Krajewski: Mater. Sci. Eng. A, 2005, vol. 36, pp. 1249–61.
30. E.M. Taleff: in Aluminum Wrought Products for Automotive, Packaging, and Other Applications—The James Morris Honorary Symp., S.K. Das, G. Jha, Z. Li, T. Zhai, and J. Liu, eds., TMS, Warrendale, PA, 2006, pp. 87–96.
31. T. R. McNelley, K. Oh-oishi, A. P. Zhilyaev, S. Swaminathan, P. E. Krajewski, and E. M. Taleff: Metall. Mater. Eng. A, 2008, vol. 39, pp. 50–64.10.1007/s11661-007-9401-5 ↗
32. P. Yavari, F. A. Mohamed, and T. G. Langdon: Acta Metall., 1981, vol. 29, pp. 1495–1507.10.1016/0001-6160(81)90184-X ↗
33. P. Yavari and T.G. Langdon: Acta Metall., 1982, vol. 30, pp. 2181–96.10.1016/0001-6160(82)90139-0 ↗
34. J. Weertman: J. Appl. Phys., 1957, vol. 28, pp. 1185–89.10.1063/1.1722604 ↗
35. J. Weertman: Trans. TMS-AIME, 1960, vol. 218, pp. 207–18.
36. W.R. Cannon and O.D. Sherby: Metall. Trans. A, 1970, vol. 1, pp. 1030–32.10.1007/BF02811789 ↗
37. F.A. Mohamed and T.G. Langdon: Acta Metall., 1974, vol. 22, pp. 779–88.10.1016/0001-6160(74)90088-1 ↗
38. W. Köster: Z. Metallkd., 1948, vol. 39, pp. 1–9.
39. K. Abe, Y. Tanji, H. Yoshinaga, and S. Morozumi: J. Jpn. Inst. Light Met., 1977, vol. 27, pp. 279–81.10.2464/jilm.27.279 ↗
40. M.-A. Kulas, W. P. Green, E. M. Taleff, P. E. Krajewski, and T. R. McNelley: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 645–55.10.1007/s11661-006-0036-8 ↗
41. J.-K. Chang, E. M. Taleff and P. E. Krajewski: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 3128–37.10.1007/s11661-009-0061-5 ↗
42. M. E. Kassner, N. Q. Nguyen, G. A. Henshall, and H. J. McQueen: Mater. Sci. Eng., 1991, vol. A132, pp. 97–105.10.1016/0921-5093(91)90366-U ↗
43. G. A. Henshall, M. E. Kassner, and H. J. McQueen: Metall. Trans. A, 1992, vol. 23A, pp. 881–89.10.1007/BF02675565 ↗
44. F. J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier, New York, NY, 2004, pp. 461–65.
45. H. J. McQueen, O. Knustad, N. Ryum, and J. K. Solberg: Scripta Metall., 1985, vol. 19, pp. 73–78.10.1016/0036-9748(85)90268-6 ↗
46. A. Gholina, F.J. Humphreys, and P. B. Prangnell: Acta Mater., 2002, vol. 50, pp. 4461–76.10.1016/S1359-6454(02)00253-7 ↗
47. F. J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier, New York, NY, 2004, p. 375.
48. J.R. Ciulik and E. M. Taleff: Scripta Mater., 2009, vol. 61, pp. 895–98.10.1016/j.scriptamat.2009.07.021 ↗