journal article·2009-04

Fabrication of Lotus-Type Porous Aluminum through Thermal Decomposition Method

S.Y. Kim, J.S. Park, H. Nakajima

Publisher page

Abstract

Lotus-type porous aluminum with cylindrical pores was fabricated by unidirectional solidification through thermal decomposition of calcium hydroxide, sodium bicarbonate, or titanium hydride. The pore-forming gas decomposed from calcium hydroxide, sodium bicarbonate, and titanium hydride is identified as hydrogen. The elongated pores are evolved due to the solubility gap between liquid and solid when the melt dissolving hydrogen is solidified unidirectionally. The porosity of lotus aluminum is as high as 20 pct despite the type of the compounds. The pore size decreases and the pore density increases with increasing amount of calcium hydroxide, which is explained by an increase in the number of pore nucleation sites. The porosity and pore size in lotus aluminum fabricated using calcium hydroxide decrease with increasing argon pressure, which is explained by Boyle’s law. It is suggested that this fabrication method is simple and safe, which makes it superior to the conventional technique using high-pressure hydrogen gas.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Nanoporous metals and alloys · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. J. Banhart: Prog. Mater. Sci., 2001, vol. 46, pp. 559–632.10.1016/S0079-6425(00)00002-5 ↗
2. N. Babcsán, D. Leitlmeier, and J. Banhart: Coll. Surf. A, 2005, vol. 261A, pp. 123–30.10.1016/j.colsurfa.2004.12.030 ↗
3. Y. Chino and D.C. Dunand: Acta Mater., 2008, vol. 56, pp. 105–13.10.1016/j.actamat.2007.09.002 ↗
4. N. Kanetake and M. Kobashi: Scripta Mater., 2006, vol. 54, pp. 521–25.10.1016/j.scriptamat.2005.10.063 ↗
5. H. Nakajima: Prog. Mater. Sci., 2007, vol. 52, pp. 1091–1173.10.1016/j.pmatsci.2006.09.001 ↗
6. V. Shapovalov: Proc. MRS Symp., 1998, vol. 52, pp. 281–90.10.1557/PROC-521-281 ↗
7. S.K. Hyun, K. Murakami, and H. Nakajima: Mater. Sci. Eng. A, 2001, vol. A299, pp. 241–48.10.1016/S0921-5093(00)01402-7 ↗
8. H. Seki, M. Tane, and H. Nakajima: Mater. Trans., 2008, vol. 49, pp. 144–50.10.2320/matertrans.MRA2007623 ↗
9. J.S. Park, S.K. Hyun, S. Suzuki, and H. Nakajima: Acta Mater., 2007, vol. 55, pp. 5646–54.10.1016/j.actamat.2007.06.022 ↗
10. T. Nakahata and H. Nakajima: Mater. Trans., 2006, vol. 46, pp. 587–92.10.2320/matertrans.46.587 ↗
11. M. Kashihara, S.K. Hyun, H. Yonetani, T. Kobi, and H. Nakajima: Scripta Mater., 2006, vol. 54, pp. 509–12.10.1016/j.scriptamat.2005.10.047 ↗
12. A. Makaya and H. Fredriksson: Mater. Sci. Eng. A, 2005, vols. A413–A414, pp. 533–37.10.1016/j.msea.2005.08.152 ↗
13. H. Nakajima and T. Ide: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 390–94.10.1007/s11661-007-9402-4 ↗
14. S.Y. Kim and H. Nakajima: Institute of Scientific and Industrials Research, Osaka University, Ibaraki, Japan.
15. D.H. Yang, B.Y. Hur, D.P. He, and S.R. Yang: Mater. Sci. Eng. A, 2007, vols. A445–A446, pp. 415–26.10.1016/j.msea.2006.09.064 ↗