journal article·2002-08

Origins of internal structure in massive transformation products

H. I. Aaronson, S. Mahajan, G. R. Purdy, M. G. Hall

Publisher page

Abstract

The internal structure in massive phases formed during six massive transformations has been reviewed. A counterpart review has also been made for the proeutectoid ferrite reaction, mainly in alloy steels in which bulk partition of alloying elements between austenite and ferrite has not occurred. Both dislocations and twins comprise this structure unless the stacking fault energy is too high to permit twin formation. Volume and shape changes associated with transformation can explain dislocation loops through stress-induced displacement and multiplication of misfit dislocations into the softer phase by means of either a dissociation reaction followed by Ashby-Johnson prismatic looping or emanation of glide loops from Frank-Reed sources. Following Gleiter et al., the “growth accidents” concept used to explain dislocation and twin formation during grain growth proves equally suitable for explaining formation of the same features during the massive and other diffusional transformations. Climb of interfaces produced by edge-to-edge rather than the usual plane-to-plane matching, introduced by Kelly and Zhang and experimentally supported by Nie and Muddle and by Howe et al. for the α → γm transformation in near-TiAl alloys, is proposed as another source of dislocations in the product phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. T.B. Massalski: Phase Transformations, ASM, Materials Park, OH, 1970, p. 433.
2. J. Kittl and T.B. Massalski: Acta Metall., 1967, vol. 15, p. 161.10.1016/0001-6160(67)90189-7 ↗
3. G. Baro, H. Gleiter, J.H. Perepezko, and T.B. Massalski: Mater. Sci. Eng., 1976, vol. 22, p. 171.10.1016/0025-5416(76)90150-6 ↗
4. G. Baro and J.H. Perepezko: Mater. Sci. Eng., 1977, vol. 28, p. 243.10.1016/0025-5416(77)90177-X ↗
5. Y. Mou and H.I. Aaronson: Acta Metall., 1994, vol. 2, p. 2159.10.1016/0956-7151(94)90040-X ↗
6. L. Delaey, B. Hawbolt, and T.B. Massalski: The Mechanism of Phase Transformations in Crystalline Solids, Institute of Metals, London, 1969, p. 300.
7. J. Malcolm and G.R. Purdy: Trans. TMS-AIME, 1967, vol. 239, p. 1391.
8. G.R. Speich and P.R. Swann: J. Iron Steel Inst., 1965, vol. 203, p. 480.
9. W.S. Owen, E.A. Wilson, and T. Bell: High Strength Materials, John Wiley, New York, NY, 1965, p. 167.
10. R.H. Goodenow and R.F. Hehemann: Trans. TMS-AIME, 1965, vol. 233, p. 1777.
11. Axel Hultgren and B. Herrlander: Trans. AIME, 1947, vol. 172, p. 493.
12. F.E. Bowman: Trans. ASM, 1946, vol. 36, p. 61.
13. H.I. Aaronson and H.A. Domian: Trans. TMS-AIME, 1966, vol. 236, p. 781.
14. R.B. Brown, H. Badekas, and G.R. Purdy: Metallography, 1983, vol. 16, p. 375.10.1016/0026-0800(83)90027-7 ↗
15. A. Hultgren: Trans. ASM, 1947, vol. 39, p. 915.
16. G.V. Kurdjumow and G. Sachs: Zeit. Phys., 1930, vol. 64, p. 325.10.1007/BF01397346 ↗
17. M.G. Hall, H.I. Aaronson, and K.R. Kinsman: Surf. Sci., 1972, vol. 31, p. 257.10.1016/0039-6028(72)90264-6 ↗
18. J.M. Rigsbee and H.I. Aaronson: Acta Metall., 1979, vol. 27, p. 365.10.1016/0001-6160(79)90029-4 ↗
19. J.M. Rigsbee and H.I. Aaronson: Acta Metall., 1979, vol. 27, p. 351.10.1016/0001-6160(79)90028-2 ↗
20. J.P. Hirth: J. Phys. Chem. Solids, 1994, vol. 55, p. 985.10.1016/0022-3697(94)90118-X ↗
21. J.P. Hirth and R.C. Pond: Acta Metall. Mater., 1996, vol. 44, p. 4749.10.1016/S1359-6454(96)00132-2 ↗
22. T. Furuhara and T. Maki: Mater. Trans., JIM, 1992, vol. 33, p. 734.10.2320/matertrans1989.33.734 ↗
23. T. Furuhara and H.I. Aaronson: Acta Metall. Mater., 1991, vol. 39, p. 2887.10.1016/0956-7151(91)90105-A ↗
24. Z. Nishiyama: Sci. Rep. Tohoku Univ., 1934, vol. 23, p. 638.
25. G. Wassermann: Archiv. Eisenhuttenwes., 1933, vol. 16, p. 647.
26. C. Yanar, J.M.K. Wiezorek, V. Radmilovic, and W.A. Soffa: 10th Int. Metallurgy and Materials Congr., Istanbul, Turkey, in press.
27. C. Yanar, J.M.K. Wiezorek, V. Radmilovic, and W.A. Soffa: Proc. Annual Meeting of the Electron Microscopy Society of America: Microscopy and Microanalysis, 2000, in press.
28. G.A. Sargent, L. Delaey, and T.B. Massalski: Acta Metall., 1968, vol. 16, p. 723.10.1016/0001-6160(68)90144-2 ↗
29. K.H.G. Ashbee, L.F. Vassamillet, and T.B. Massalski: Acta Metall., 1967, vol. 15, p. 181.10.1016/0001-6160(67)90190-3 ↗
30. J.F. Nie, H.I. Aaronson, and B.C. Muddle: Proc. Int. Conf. on Solid-Solid Phase Transformations ’99, Japan Inst. of Metals, Sondai, Japan, 1999, p. 157.
31. M.F. Ashby and L. Johnson: Phil. Mag., 1969, vol. 20, p. 614.10.1080/14786436908228069 ↗
32. J.-F. Nie and B.C. Muddle: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2381–89.10.1007/s11661-002-0361-5 ↗
33. H.I. Aaronson: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2285–97.10.1007/s11661-002-0352-6 ↗
34. T.B. Massalski: Acta Metall., 1958, vol. 6, p. 243.10.1016/0001-6160(58)90143-3 ↗
35. T.B. Massalski: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2277–83.10.1007/s11661-002-0351-7 ↗
36. H.I. Aaronson, C. Laird, and K.R. Kinsman: Scripta Metall., 1968, vol. 2, p. 259.10.1016/0036-9748(68)90117-8 ↗
37. E.A. Wilson and S.H. Chong: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2425–31.10.1007/s11661-002-0364-2 ↗
38. H.I. Aaronson, J.M. Howe, M.G. Hall, T. Furuhara, and J.P. Hirth: Scripta Mater., 1997, vol. 37, p. 1301.10.1016/S1359-6462(97)00202-9 ↗
39. J.A. Hren and G. Thomas: Trans. TMS-AIME, 1963, vol. 227, p. 308.
40. M.-X. Zhang and P.M. Kelly: Acta Mater., 1998, vol. 46, p. 4617.10.1016/S1359-6454(98)00139-6 ↗
41. P.M. Kelly and M.-X. Zhang: Mater. Forum, 1999, vol. 23, p. 4.
42. J.M. Howe, W.T. Reynolds, Jr. and V.K. Vasudevan: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2391–2411.10.1007/s11661-002-0362-4 ↗
43. H. Gleiter: Acta Metall., 1969, vol. 17, p. 1421.10.1016/0001-6160(69)90004-2 ↗
44. H. Gleiter, S. Mahajan, and K.J. Bachmann: Acta Metall., 1980, vol. 28, p. 1603.10.1016/0001-6160(80)90013-9 ↗
45. S. Mahajan, C.S. Pande, M.A. Imam, and B.B. Rath: Acta Metall., 1997, vol. 45, p. 2633.
46. J.P. Hirth and J. Lothe: Theory of Dislocations, 2nd ed., John Wiley, New York, NY, 1982.
47. T. Furuhara, J.M. Howe, and H.I. Aaronson: Acta Metall. Mater., 1991, vol. 39, p. 2873.10.1016/0956-7151(91)90104-9 ↗
48. M.G. Hall, T. Furuhara, H.I. Aaronson, and J.P. Hirth: Acta Mater., 2001, vol. 49, p. 3487.10.1016/S1359-6454(01)00227-0 ↗
49. H. Tsubakino and H.I. Aaronson: Metall. Trans. A, 1987, vol. 18A, p. 2047.10.1007/BF02647077 ↗
50. G.R. Purdy: Acta Metall., 1978, vol. 26, p. 487.10.1016/0001-6160(78)90174-8 ↗
51. C. Yanar, V. Radmilovic, W.A. Soffa, and J.M.K. Wiezorek: Intermetallics, 2001, vol. 9, p. 949.10.1016/S0966-9795(01)00095-4 ↗
52. C. Yanar, J.M.K. Wiezorek, V. Radmilovic, and W.A. Soffa: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2413–23.10.1007/s11661-002-0363-3 ↗