journal article·2013-03

Wear Behavior at High Temperature of Dual-Particle Size Zircon-Sand-Reinforced Aluminum Alloy Composite

Suresh Kumar, Ranvir Singh Panwar, O. P. Pandey

Publisher page

Abstract

The basic aim of the present investigation is to study the role of particle size for high-temperature application of ZrSiO4-reinforced aluminum-based LM13 alloy composite as a bearing material. Composites containing 15 wt pct ZrSiO4 particles of two different size ranges (20 to 32 and 106 to 125 μm) in different proportion were prepared by the stir casting route. The microhardness measured at different areas indicates good interfacial bonding. Transition in the wear mode for all composites occurs after temperature 423 K (150 °C). The overall wear properties of DPS-2 composite containing 12 pct fine and 3 pct coarse particles are better at all temperatures for both low and high loads.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. G.W. Stachowiak and A.W. Batchelor: Engineering Tribology, 2nd ed., Butterworth-Heinemann, Boston, MA, 2001, p. 740.
2. K.H. Zum Gahr: Microstructure and Wear of Materials, Elsevier, Amsterdam, 1987, pp. 8–17.
3. L. Pedersen and L. Arnberg: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 525–32.10.1007/s11661-001-0069-y ↗
4. H. Jang and S.J. Kim: Polymer Tribology, S.K. Sinha and B.J. Briscoe, eds., Imperial College, London, 2009, pp. 506–32.10.1142/9781848162044_0015 ↗
5. G. Nicholson: Facts About Friction, P and W Price Enterprises Inc., Gedoran America Ltd, Winchester, VA, 1995.
6. A. Mahato, N. Verma, V. Jayaram, and S.K. Biswas: Acta Mater., 2011, vol. 59, pp. 6069–82.10.1016/j.actamat.2011.06.016 ↗
7. A. Mazahery and M.O. Shabani: Ceram. Int., 2012, vol. 38, pp. 4263–69.10.1016/j.ceramint.2012.02.008 ↗
8. H. Torabian, J.P. Pathak, and S.N. Tiwari: Wear, 1994, vol. 172, pp. 49–58.10.1016/0043-1648(94)90298-4 ↗
9. Y.N. Liang, Z.Y. Ma, S.Z. Li, J. Bi, and S. Li: J. Mater. Sci. Lett., 1995, vol. 14, pp. 114–16.10.1007/BF00456563 ↗
10. K. Kaur and O.P. Pandey: Tribol. Lett., 2010. vol. 38, pp. 377–87.10.1007/s11249-010-9620-6 ↗
11. S. Das, S. Das, and K. Das: Compos. Sci. Technol., 2007, vol. 67, pp. 746–51.10.1016/j.compscitech.2006.05.001 ↗
12. S. Das, D.P. Mondal, and G. Dixit: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 633–40.10.1007/s11661-001-0080-3 ↗
13. K. Kaur and O.P. Pandey: J. Alloys Compd., 2010, vol. 503, pp. 410–15.10.1016/j.jallcom.2010.04.249 ↗
14. J. Hashim, L. Looney, and M.S.J. Hashmi: J. Mater. Process. Technol., 1999, vols. 92–93, pp. 1–7.10.1016/S0924-0136(99)00118-1 ↗
15. P.N. Bindumadhavan, H.K. Wah, and O. Prabhakar: Wear, 2001, vol. 248, pp. 112–20.10.1016/S0043-1648(00)00546-9 ↗
16. Q. Zhang, G. Wu, D. Sun, G. Chen, and L. Jiang: J. Mater. Sci., 2004, vol. 39, pp. 303–05.10.1023/B:JMSC.0000007761.85651.d6 ↗
17. M.A. Martinez, A. Martin, and J. Llorca: Scripta Metall., 1993, vol. 28, pp. 207–12.10.1016/0956-716X(93)90564-9 ↗
18. M.A. Martinez, A. Martin, and J. Llorca: Wear, 1996, vol. 193, pp. 169–79.10.1016/0043-1648(95)06704-3 ↗
19. T.F.J. Quinn, J.L. Sullivan, and D.M. Rowson: Wear, 1984, vol. 94, pp. 175–91.10.1016/0043-1648(84)90053-X ↗
20. O. Vorren, J.E. Evensen, and T.B. Pedersen: AFS Trans., 1984, vol. 92, pp. 459–66.
21. L.J. Colley, M.A. Wells, and D.M. Maijer: Mater. Sci. Eng. A 2004, vol. 386, pp. 140–48.10.1016/S0921-5093(04)00928-1 ↗
22. E. Rincon, H.F. Lopez, M.M. Cisneros, and H. Mancha: Mater. Sci. Eng. A, 2009, vol. 519, pp. 128–40.10.1016/j.msea.2009.05.022 ↗
23. H.E. Evans: Appl. Sci. Pub., 1984, p. 283.
24. A. Pauschitz, M. Roy, and F. Franek: Tribol. Int., 2008, vol. 41, pp. 584–92.10.1016/j.triboint.2007.10.003 ↗
25. G. Rajaram, S. Kumaran, and T. Srinivasa Rao: Mater. Sci. Eng. A, 2010, vol. 528, pp. 247–53.10.1016/j.msea.2010.09.020 ↗
26. J. Hashim, L. Looney, and M.S.J. Hashmi: J. Mater. Process. Technol., 2002, vol. 123, pp. 251–57.10.1016/S0924-0136(02)00098-5 ↗
27. J. Hashim L. Looney, and M.S.J. Hashmi: J. Mater. Process. Technol., 2002, vol. 12, pp. 258–63.10.1016/S0924-0136(02)00099-7 ↗
28. A. Wang and H.J. Rack: Mater. Sci. Eng. A, 1991, vol. l47, pp. 211–24.10.1016/0921-5093(91)90848-H ↗
29. V. Sharma, S. Kumar, R.S. Panwar, and O.P. Pandey: J. Mater. Sci., 2012, vol. 47 pp. 6633–46.10.1007/s10853-012-6599-4 ↗
30. S. Kumar, V. Sharma, R.S. Panwar, and O.P. Pandey: Tribol. Lett., 2012 vol. 47 pp. 231–51.10.1007/s11249-012-9983-y ↗
31. J. Zhang and A.T. Alpas: Mater. Sci. Eng. A, 1993, vol. 161, pp. 273–84.10.1016/0921-5093(93)90522-G ↗
32. S. Wilson and A.T. Alpas: Wear, 1996, vol. 196, pp. 270–78.10.1016/0043-1648(96)06923-2 ↗
33. D. Bmo, F.R. Tiller, and D.J. Lloyd: Acta Metall. Mater., 1994, vol. 42, pp. 2525–33.10.1016/0956-7151(94)90333-6 ↗
34. D.P. Mondal, S. Das, R.N. Rao, and M. Singh: Mater. Sci. Eng. A, 2005, vol. 402, pp. 307–19.10.1016/j.msea.2005.05.023 ↗
35. A. Kapoor and K.L. Johnson: Proceedings of the 19th Leeds-Lyon Symposium on Tribology, Leeds, Sept. 8–11, 1992.
36. K.L. Johnson and H.R. Shercliff: Int. J. Mech. Sci., 1992, vol. 34 (5), pp. 375–94.10.1016/0020-7403(92)90025-C ↗
37. A.W.J. De Gee: Wear, 1981, vol. 65 (3), pp. 397–405.10.1016/0043-1648(81)90065-X ↗
38. A.J. Clegg and A.A. Das: Wear, 1977, vol. 43, pp. 367–73.10.1016/0043-1648(77)90132-6 ↗
39. S.R. Bakshi, D. Wang, T. Price, D. Zhang, A.K. Keshri, Y. Chen, D.G. McCartney, P.H. Shipway, and A. Agarwal: Surf. Coat. Technol., 2009, vol. 204, pp. 503–10.10.1016/j.surfcoat.2009.08.018 ↗
40. D. Tabor: Proc. R. Soc. London, Ser. A, 1959, vol. 251, pp. 378–93.10.1098/rspa.1959.0114 ↗