journal article·2002-03

A study of twinning in zirconium using neutron diffraction and polycrystalline modeling

Partha Rangaswamy, Mark A. M. Bourke, Donald W. Brown, George C. Kaschner, Ronald B. Rogge, Michael G. Stout, Carlos N. Tomé

Publisher page

Abstract

An experimental study using neutron diffraction quantified the evolution of twinning in pure clockrolled zirconium that was subsequently deformed under uniaxial compression. The clock rolling introduced an initial texture of approximately 5 times random, and the compression specimens were cut with their loading axes nearly parallel to the predominant c-axes direction. Seven specimens deformed to strains between −2 and −17 pct and an undeformed specimen (0 pct strain) were examined. The deformation was performed at an applied strain rate of 0.001/s at 77 K. Twin volume fractions were estimated from diffraction data. Changes in texture and twin volume fractions were compared to predictions from a visco-plastic self-consistent (VPSC) polycrystal model, which described both slip and twinning. This work demonstrates the feasibility of using neutron diffraction to track the evolution of twinning. These results help benchmark the polycrystalline model, validate the description of twinning, and potentially lead to a better understanding of its role in hardening.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Rare-earth and actinide compounds · X-ray Diffraction in Crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. R.E. Reed-Hill: in Deformation Twinning, R.E. Reed-Hill, J.P. Hirth, and H.C. Rogers, eds. TMS, Warrendale, PA, vol. 25,1964, p. 295.
2. P.G. Partridge: Metall. Rev., 1967, vol. 12, p. 169.10.1179/095066067790138184 ↗
3. E. Tenckhoff: Deformation Mechanisms, Texture, and Anisotropy in Zirconium and Zircaloy, ASTM, Philadelphia, PA, 1988, p. 3.
4. S.G. Song, and G.T. Gray III: Metall. Mater. Trans. A., 1995, vol. 26A, pp. 2665–76.10.1007/BF02669423 ↗
5. G.C. Kaschner, G.T. Gray III, and S.R. Chen: Proc. Topical Conf. on “Shock Compression of Condensed Matter”. S.C. Schmidt, D.P. Dandekar, and J.W. Forbes, eds, AIP, Amherst, MA, 1997, pp. 435–38.
6. G.C. Kaschner, and G.T. Gray III: Metall. Mater. Trans. A., 2000, vol. 31A, pp. 1997–2003.10.1007/s11661-000-0227-7 ↗
7. C.N. Tome, P.J. Maudlin, R.A. Lebensohn, and G.C. Kaschner: Acta Mater., 2001, vol. 49 (15), pp. 3085–96.10.1016/S1359-6454(01)00190-2 ↗
8. G.C. Kascher, J.F. Bingert, C. Liu, M.L. Lovato, P.J. Maudlin, M.G. Stout, and C.N. Tome: Acta Mater, 2001, vol. 49 (15), pp. 3097–3108.10.1016/S1359-6454(01)00191-4 ↗
9. J.S. Kallend, U.F. Kocks, A.D. Rollett, and H.R. Wenk, Text. Microstr., 1991, vol. 14 (5), pp. 1203–08.10.1155/TSM.14-18.1203 ↗
10. S. Matthies, and G.W. Vinel: Phys. Status Solid B—Basic Res., 1982, vol. 112 (2), pp. K111-K114.10.1002/pssb.2221120254 ↗
11. Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Effect on Materials Properties, U.F. Kocks, C.N. Tome, and H.R. Wenk, eds., Cambridge University Press, Cambridge, NY, 1998, pp. 115–16.
12. M.A.M. Bourke, J.A. Goldstone, and T.M. Holden: Measurement of Residual and Applied Stress Using Neutron Diffraction, M.T. Hutchings and A.D. Krawitz, eds., Kluwer Academic Publishers. Dordrecht, The Netherlands, 1992, pp. 369–82.10.1007/978-94-011-2797-4_29 ↗
13. R.B. Von Dreele, J.D. Jorgensen, and C.-G. Windsor: J. Appl. Cryst., 1982, vol. 15, p. 581.10.1107/S0021889882012722 ↗
14. L.B. McCusker, R.B. Vondreele, D.E. Cox, D. Louer, and P. Scardi: J. Appl. Cryst., 1999, vol. 32, pp. 36–50.10.1107/S0021889898009856 ↗
15. H.M. Rietveld: J. Appl. Cryst., 1969, vol. 2, p. 65.10.1107/S0021889869006558 ↗
16. A.C. Lawson, and R.B. Von Dreele: Report No. LAUR 86-748 Los Alamos National Laboratory, Los Alamos, NM, 1966.
17. T.A. Mason, J.F. Bingert, and G.C. Kaschner: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 949–54.