Corrosion Study of Super Ferritic Stainless Steel UNS S44660 (26Cr-3Ni-3Mo) and Several Other Stainless Steel Grades (UNS S31603, S32101, and S32205) in Caustic Solution Containing Sodium Sulfide
Source abstract
Abstract
Electrochemical techniques, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) were used in this study to show how the corrosion mechanism of several commercial grades of stainless steel in hot caustic solution is strongly influenced by the presence of sodium sulfide. Experimental results from super ferritic stainless steel UNS S44660 (26Cr-3Ni-3Mo) were compared to austenitic stainless steel UNS S31603, lean duplex stainless steel (DSS) UNS S32101, and standard DSS UNS S32205 in caustic solution, with and without sodium sulfide, at 443 K (170 °C). Weight loss measurements indicated that corrosion rates of UNS44660 were much lower than the other grades of stainless steel in the presence of the sodium sulfide. Potentiodynamic polarization and linear polarization resistance measurements showed that the electrochemical behavior was altered by the adhesion of sulfur species, which reduced the polarization resistances and increased the anodic current densities. SEM and XPS results imply that the surface films that formed in caustic solution containing sodium sulfide were defective due to the adsorption of sulfide, which destabilized the passive film and led to the formation of insoluble metal sulfide compounds.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. T.J. Nichol, I.A. Franson, and G.E. Moller: in CORROSION/81, NACE, Houston, TX, 1981, Paper No. 117.
2. N.J.E. Dowling, H. Kim, J.-N. Kim, S.-K. Ahn, Y.-D. Lee: Corrosion, 1999, vol. 55, pp. 743-752.10.5006/1.3284029 ↗
3. H. Richaud-Minier and P. Gerard: in NACE Corros. 2009 Conf. Expo., Atlanta, GA, 2009, Paper No. 09378.
4. D.L. Singbeil, A. Garner: Corrosion, 1985, vol. 41, pp. 634-639.10.5006/1.3582997 ↗
5. A. Wensley: in Proc. 9th Int. Symp. Corros. Pulp Paper Ind., Ottawa, ON, Canada, 1998, pp. 27–37.
6. A. Wensley, M. Moskal, and W. Wilton: in NACE Corrosion 97, Houston, TX, 1997, Paper No. 378.
7. G. Rondelli, B. Vicentini, E. Sivieri: Corros. Sci., 1997, vol. 39 (6), pp. 1037-1049.10.1016/S0010-938X(97)88507-1 ↗
8. J.H. Zheng, W.F. Bogaerts, M.J. Brabers: Corrosion, 1992, vol. 48, pp. 320-331.10.5006/1.3315938 ↗
9. A. Bhattacharya, P.M. Singh: Corros. Sci., 2011, vol. 53 (1), pp. 71-81.10.1016/j.corsci.2010.09.024 ↗
10. A. Bhattacharya, P.M. Singh: J. Fail. Anal. Prev., 2007, vol. 7 (5), pp. 371-377.10.1007/s11668-007-9069-6 ↗
11. A. Bhattacharyaa and P.M. Singh: Metall. Mater. Trans. A, 2009, vol. 40A (6), pp. 1388-1399.10.1007/s11661-009-9833-1 ↗
12. G. Rondelli, I. B. Vicentini, M.F. Brunella, A. Cigada: Mater. Corros., 1993, vol. 44 (2), pp. 57-61.10.1002/maco.19930440206 ↗
13. K.R. Chasse, P.M. Singh: Corrosion, 2011, vol. 67 (1), p. 015002-1.10.5006/1.3546848 ↗
14. K.R. Chasse, P.M. Singh: Corros. Eng. Sci. Tech., 2012, vol. 47 (3), pp. 170-76.10.1179/1743278211Y.0000000024 ↗
15. M. Honda, Y. Kobayashi, A. Tamada: Corrosion, 1992, vol. 48, pp. 822-829.10.5006/1.3315880 ↗
16. H. Leinonen, P. Pohjanne, K.R. Chasse, P.M. Singh, J. Romu, T. Saukkonen, and H. Hänninen: NACE Corros. 2012 Conf. Expo., Salt Lake City, UT, 2012, Paper No. 1746.
17. H.T. Leinonen, P. Pohjanne, T. Saukkonen, T. Schildt, J. Romu, and H. Hanninen: NACE Corros. 2011 Conf. Expo., Houston, TX, 2011, Paper No. 11160.
18. P.M. Singh, O. Ige, J. Mahmood: Corrosion, 2003, vol. 10, pp. 843-850.10.5006/1.3287704 ↗
19. J. Ramo, M. Sillanpaa, A. Kujalao, O. Hyokyvirta, S. Peltonen: Mater. Corros., 2001, vol. 52, pp. 531-539.10.1002/1521-4176(200107)52:7<531::AID-MACO531>3.0.CO;2-S ↗
20. J. Ramo, M. Sillanpaa, A. Kujalao, O. Hyokyvirta, S. Peltonen: Mater. Corros., 2001, vol. 52, pp. 741-747.10.1002/1521-4176(200110)52:10<741::AID-MACO741>3.0.CO;2-J ↗
21. I. Betova, M. Bojinov, O. Hyokyvirta, and T. Saario: Corros. Sci., vol. 52, 2010, pp. 1499-1507.10.1016/j.corsci.2009.12.034 ↗
22. C.-O.A. Olsson, D. Landolt: Electrochim. Acta, 2003, vol. 48, pp. 1093-1104.10.1016/S0013-4686(02)00841-1 ↗
23. C.L. McBee, J. Kruger: Electrochim. Acta, 1972, vol. 17, pp. 1337-1341.10.1016/0013-4686(72)80079-3 ↗
24. C. Pallotta, N. De Cristofaro, R.C. Salvarezza, A.J. Arvia: Electrochim. Acta, 1986, vol. 31, pp.1265–70.10.1016/0013-4686(86)80146-3 ↗
25. E.J. Calvo, C.D. Pallotta: J. Electroanal. Chem., 1986, vol. 198, pp. 181-186.10.1016/0022-0728(86)90035-5 ↗
26. J.H. Gerretsen, J.H.W. de Wit, J.C. Riviere: Corros. Sci., 1990, vol. 31, pp. 545-550.10.1016/0010-938X(90)90160-7 ↗
27. R. Kirchheim, B., Heine, S. Hofmann, E.B. Yeager: Corros. Sci., 1989, vol. 29, pp. 899-917.10.1016/0010-938X(89)90060-7 ↗
28. S.C. Tjong, R.W. Hoffman, E.B. Yeager: J. Electrochem. Soc., 1982, vol. 129, pp. 1662-1668.10.1149/1.2124232 ↗
29. Y. Jang, J. Son, S. Kim, J. Lee: Metall. Mater. Trans. A, 2004, vol. 35A (11), pp. 3431-3438.10.1007/s11661-004-0179-4 ↗
30. C. Chen, C.R. Clayton: J. Electrochem. Soc., 1997, vol. 144 (9), pp. 3140-3146.10.1149/1.1837972 ↗
31. J. Duan, B. Hou, Z. Yu: Mater. Sci. Eng. C., 2006, vol. 26, pp. 624-629.10.1016/j.msec.2005.09.108 ↗
32. P.J. Antony, R.K. Singh Raman, P. Kumar, R. Raman: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2689-2697.10.1007/s11661-008-9626-y ↗
33. C.R. Clayton, G.P. Halada, J.R. Kearns, J.B. Gillow, and A.J. Francis: in Microbiologically Influenced Corrosion Testing. J.R. Kearns and B.J. Little eds., ASTM STP 1232, Philadelphia, PA, 1994, pp. 141–152.10.1520/STP12931S ↗
34. ASTM A268/A268M, Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service, ASTM International, West Conshocken, PA, 2010.
35. ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications, ASTM International, West Conshocken, PA, 2011.
36. Y. Yang, S. Kim, J. Lee: Metall. Mater. Trans. A, 2005, vol. 36A (5), pp. 1229-1236.
37. D.W. Shoesmith, M.G. Bailey, B. Ikeda: Electrochim. Acta, 1978, vol. 23, pp. 1329-1338.10.1016/0013-4686(78)80013-9 ↗
38. D. Tromans: J. Electrochem. Soc., 1980, vol. 127, pp. 1253-1256.10.1149/1.2129865 ↗
39. R.C. Salvarezza, H.A. Videla, A.J. Arvia: Corros. Sci, 1982, vol. 22, pp. 815-829.10.1016/0010-938X(82)90078-6 ↗
40. HSC Chemistry 5.11, Outokumpu Technology Engineering Research, Espoo, Finland, 2008.
41. M. Pourbaix: Atlas of Electrochemical Equilibria in Aqeuous Solutions, NACE, Houston, TX, 1974.
42. D.C. Crowe and R.A. Yeske: IPC Technical Paper Series No. 191, Institute of Paper Science, Atlanta, GA, 1986, 17 p.
43. M. Stern, A. L. Geary: J. Electrochem. Soc., 1957, vol. 104 (1), pp. 56-63.10.1149/1.2428496 ↗