journal article·2010-09

Effects of Route on Microstructural Evolution and Mechanical Properties of Cu-8 Wt Pct Ag Alloy Processed by Equal Channel Angular Pressing

Yan-Zhong Tian, Qi-Qiang Duan, Hua-Jie Yang, He-Fei Zou, Gang Yang, Shi-Ding Wu, Zhe-Feng Zhang

Publisher page

Abstract

Equal channel angular pressing (ECAP) is applied to investigate the microstructural evolution and mechanical properties of Cu-8 wt pct Ag alloy subjected to one to four passes via four different routes (A, B(A), B(C), and C). It is demonstrated that better mechanical properties, a higher fraction of high-angle boundaries, and a smaller grain size can be obtained most rapidly with route A, whereas the specimen processed by route B(C) contains relatively inhomogeneous microstructure and has poor mechanical properties. The ultimate tensile stress (UTS) of the Cu-Ag alloy processed by route B(C) saturates after four passes; in contrast, the UTS of the Cu-Ag alloy processed by route A increases continuously in relation to the number of ECAP passes. Based on the experimental results, the strengthening mechanisms of the Cu-8 wt pct Ag alloy processed by different routes as well as the efficiency of different routes in refining the binary alloy are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Y. Sakai and H.-J. Schneider-Muntau: Acta Mater., 1997, vol. 45, pp. 1017–23.10.1016/S1359-6454(96)00248-0 ↗
2. G. Frommeyer and G. Wassermann: Acta Metall., 1975, vol. 23, pp. 1353–60.10.1016/0001-6160(75)90144-3 ↗
3. W.A. Spitzig, A.R. Pelton, and F.C. Laabs: Acta Metall., 1987, vol. 35, pp. 2427–42.10.1016/0001-6160(87)90140-4 ↗
4. K. Adachi, S. Tsubokawa, T. Takeuchi, and H.G. Suzuki: J. Jpn. Inst. Met., 1997, vol. 61, pp. 397–403.10.2320/jinstmet1952.61.5_397 ↗
5. P.D. Funkenbusch and T.H. Courtney: Scripta Metall., 1981, vol. 15, pp. 1349–54.10.1016/0036-9748(81)90096-X ↗
6. Y. Sakai, K. Inoue, T. Asano, H. Wada, and H. Maeda: Appl. Phys. Lett., 1991, vol. 59, pp. 2965–67.10.1063/1.105813 ↗
7. A. Benghalem and D.G. Morris: Acta Mater., 1997, vol. 45, pp. 397–406.10.1016/S1359-6454(96)00152-8 ↗
8. J.D. Embury and R.M. Fisher: Acta Metall., 1966, vol. 14, pp. 147–59.10.1016/0001-6160(66)90296-3 ↗
9. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
10. Y.T. Zhu, T.C. Lowe, and T.G. Langdon: Scripta Mater., 2004, vol. 51, pp. 825–30.10.1016/j.scriptamat.2004.05.006 ↗
11. S.C. Wang, M.J. Starink, N. Gao, X.G. Qiao, C. Xu, and T.G. Langdon: Acta Mater., 2008, vol. 56, pp. 3800–09.10.1016/j.actamat.2008.04.022 ↗
12. P.L. Sun, P.W. Kao, and C.P. Chang: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1359–68.10.1007/s11661-004-0311-5 ↗
13. Y.T. Zhu, J.Y. Huang, J. Gubicza, T. Ungar, Y.M. Wang, E. Ma, and R.Z. Valiev: J. Mater. Res., 2003, vol. 18, pp. 1908–17.10.1557/JMR.2003.0267 ↗
14. Y.H. Zhao, X.Z. Liao, Z. Jin, R.Z. Valiev, and Y.T. Zhu: Acta Mater., 2004, vol. 52, pp. 4589–99.10.1016/j.actamat.2004.06.017 ↗
15. T.G. Langdon, M. Furukawa, M. Nemoto, and Z. Horita: JOM, 2000, vol. 52, pp. 30–33.10.1007/s11837-000-0128-7 ↗
16. A. Mishra, B.K. Kad, F. Gregori, and M.A. Meyers: Acta Mater., 2007, vol. 55, pp. 13–28.10.1016/j.actamat.2006.07.008 ↗
17. F. Dalla Torre, R. Lapovok, J. Sandlin, P.F. Thomson, C.H.J. Davies, and E.V. Pereloma: Acta Mater., 2004, vol. 52, pp. 4819–32.10.1016/j.actamat.2004.06.040 ↗
18. V.M. Segal, K.T. Hartwig, and R.E. Goforth: Mater. Sci. Eng. A, 1997, vol. 224A, pp. 107–15.10.1016/S0921-5093(96)10539-6 ↗
19. A.P. Zhilyaev and T.G. Langdon: Prog. Mater. Sci., 2008, vol. 53, pp. 893–979.10.1016/j.pmatsci.2008.03.002 ↗
20. Y.S. Li, N.R. Tao, and K. Lu: Acta Mater., 2008, vol. 56, pp. 230–41.10.1016/j.actamat.2007.09.020 ↗
21. N.R. Tao and K. Lu: J. Mater. Sci. Technol., 2007, vol. 23, pp. 771–74.10.1179/174328407X185802 ↗
22. Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai: Acta Mater., 1999, vol. 47, pp. 579–83.10.1016/S1359-6454(98)00365-6 ↗
23. M. Furukawa, Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Mater. Sci. Eng. A, 1998, vol. 257, pp. 328–32.10.1016/S0921-5093(98)00750-3 ↗
24. L.R. Cornwell, K.T. Hartwig, R.E. Goforth, and S.L. Semiatin: Mater. Charact., 1996, vol. 37, pp. 295–300.10.1016/S1044-5803(97)80018-6 ↗
25. T.S. Edgecumbe Summers, V.M. Segal, K.T. Hartwig, R.E. Goforth, R.P. Walsh, and P. Pernambuco-Wise: Adv. Cryogen Eng., 1996, vol. 42, pp. 499–505.
26. Y.T. Zhu and T.C. Lowe: Mater. Sci. Eng. A, 2000, vol. 291, pp. 46–53.10.1016/S0921-5093(00)00978-3 ↗
27. K. Oh-Ishi, Z. Horita, M. Furukawa, M. Nemoto, and T.G. Langdon: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2011–13.10.1007/s11661-998-0027-z ↗
28. V.V. Stolyarov, Y.T. Zhu, I.V. Alexandrov, T.C. Lowe, and R.Z. Valiev: Mater. Sci. Eng. A, 2001, vol. 299, pp. 59–67.10.1016/S0921-5093(00)01411-8 ↗
29. P.B. Prangnell, A. Gholinia, and M.V. Markushev: Investigations and Applications of Severe Plastic Deformation, Eds. T.C. Lowe and R.Z. Valiev, Kluwer Academic Publishers, Dordrecht, The Netherlands, 2000, pp. 65–71.10.1007/978-94-011-4062-1_9 ↗
30. A. Gholinia, P.B. Prangnell, and M.V. Markushev: Acta Mater., 2000, vol. 48, pp. 1115–30.10.1016/S1359-6454(99)00388-2 ↗
31. Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Acta Mater., 1997, vol. 45, pp. 4733–41.10.1016/S1359-6454(97)00100-6 ↗
32. Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Acta Mater., 1998, vol. 46, pp. 3317–31.10.1016/S1359-6454(97)00494-1 ↗
33. S. Li: Scripta Mater., 2009, vol. 60, pp. 706–09.10.1016/j.scriptamat.2008.12.048 ↗
34. I.J. Beyerlein, R.A. Lebensohn, and C.N. Tomé: Mater. Sci. Eng. A, 2003, vol. 345, pp. 122–38.10.1016/S0921-5093(02)00457-4 ↗
35. Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto, and T.G. Langdon: Scripta Mater., 1996, vol. 35, pp. 143–46.10.1016/1359-6462(96)00107-8 ↗
36. Y. Iwahashi, M. Furukawa, Z. Horita, M. Nemoto, and T.G. Langdon: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2245–52.10.1007/s11661-998-0102-5 ↗
37. Y.Z. Tian and Z.F. Zhang: Mater. Sci. Eng. A, 2009, vol. 508, pp. 209–13.10.1016/j.msea.2008.12.050 ↗
38. S. Nagasaki and M. Hirabayashi: Binary Alloy Phase-Diagrams, AGNE Gijutsu Center, Co., Ltd., Tokyo, Japan. 2002.
39. J. Lin and L. Meng: J. Alloy. Compd., 2008, vol. 454, pp. 150–55.10.1016/j.jallcom.2006.12.073 ↗
40. S.I. Hong and M.A. Hill: Acta Mater., 1998, vol. 46, pp. 4111–22.10.1016/S1359-6454(98)00106-2 ↗
41. K. Han, A.A. Vasquez, Y. Xin, and P.N. Kalu: Acta Mater., 2003, vol. 51, pp. 767–80.10.1016/S1359-6454(02)00468-8 ↗
42. Y.Z. Tian, Z.F. Zhang, and Z.G. Wang: Phil. Mag., 2009, vol. 89, pp. 1715–30.10.1080/14786430903032548 ↗
43. S. Qu, X.H. An, H.J. Yang, C.X. Huang, G. Yang, Q.S. Zang, Z.G. Wang, S.D. Wu, and Z.F. Zhang: Acta Mater., 2009, vol. 57, pp. 1586–601.10.1016/j.actamat.2008.12.002 ↗
44. R.Z. Valiev, I.V. Alexandrov, Y.T. Zhu, and T.C. Lowe: J. Mater. Res., 2002, vol. 17, pp. 5–8.10.1557/JMR.2002.0002 ↗
45. Y.H. Zhao, J.F. Bingert, X.Z. Liao, B.Z. Cui, K. Han, A.V. Sergueeva, A.K. Mukherjee, R.Z. Valiev, T.G. Langdon, and Y.T. Zhu: Adv. Mater., 2006, vol. 18, pp. 2949–53.10.1002/adma.200601472 ↗
46. L. Lu, Y. Shen, X. Chen, L. Qian, and K. Lu: Science, 2004, vol. 304, pp. 422–26.10.1126/science.1092905 ↗
47. M.E. Launey and R.O. Ritchie: Adv. Mater., 2009, vol. 21, pp. 1–8.10.1002/adma.200803322 ↗
48. W.D. Callister, Jr., Fundamentals of Materials Science and Engineering, 5th ed., John Wiley & Sons Inc., New York, NY, 2001.
49. P.J. Apps, J.R. Bowen, and P.B. Prangnell: Acta Mater., 2003, vol. 51, pp. 2811–22.10.1016/S1359-6454(03)00086-7 ↗
50. M. Furukawa, Z. Horita, and T.G. Langdon: Mater. Sci. Eng. A, 2002, vol. 332A, pp. 97–109.10.1016/S0921-5093(01)01716-6 ↗
51. P.B. Prangnell, J.R. Bowen, and P.J. Apps: Mater. Sci. Eng. A, 2004, vol. 375-7A, pp. 178–85.10.1016/j.msea.2003.10.170 ↗
52. O.V. Mishin and A. Godfrey: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2923–30.10.1007/s11661-008-9658-3 ↗
53. M. Berta, P.J. Apps, and P.B. Prangnell: Mater. Sci. Eng. A, 2005, vol. 410-1A, pp. 381–85.10.1016/j.msea.2005.08.026 ↗
54. Y.Z. Tian, W.Z. Han, H.J. Yang, S.X. Li, S.D. Wu, and Z.F. Zhang: Scripta Mater., 2010, vol. 62, pp. 183–86.10.1016/j.scriptamat.2009.10.020 ↗
55. J.B. Liu, L. Meng, and Y.W. Zeng: Mater. Sci. Eng. A, 2006, vol. 435–436, pp. 237–44.10.1016/j.msea.2006.07.125 ↗
56. C.L. Trybus and W.A. Spitzig: Acta Metall., 1989, vol. 37, pp. 1971–81.10.1016/0001-6160(89)90081-3 ↗