Effect of Hydrogen on Tensile Properties of Ultrafine-Grained Type 310S Austenitic Stainless Steel Processed by High-Pressure Torsion
Source abstract
Abstract
This study addresses a hydrogen effect on the tensile properties of a type 310S austenitic stainless steel with ultrafine-grained structures produced by high-pressure torsion (HPT) and subsequent annealing. The mean grain size was reduced to ~85 nm by the HPT processing. The grain size was increased by the post-HPT annealing, but the grain size of ~265 nm was retained after annealing at 1023 K (750 °C). The tensile strength of ~1.2 GPa, which is approximately twice as much as that of the solution-treated specimen, was attained in the 1023 K (750 °C) post-HPT-annealed specimen. The elongation to failure was restored up to ~15 pct by the post-HPT annealing, although it was still insufficient in comparison with the ~55 pct elongation of the solution-treated specimen. There was no change in the tensile strength of the HPT-processed specimens and the post-HPT-annealed specimens by hydrogen charging with the hydrogen content in the range of ~20 to 40 mass ppm. The HPT-processed and the 773 K (500 °C) post-HPT-annealed specimens exhibited a ductility loss through the fully shear type fracture. The hydrogen charge into higher temperature post-HPT-annealed specimens with σ-FeCr precipitates led to a mild hydrogen embrittlement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. R.M. Vennett and G.S. Ansell: Trans. Am. Soc. Met., 1967, vol. 60, pp. 242-51.
2. R.B. Benson Jr., R.K. Dann, and L.W. Roberts Jr.: Trans. TMS-AIME, 1968, vol. 242, pp. 2199–205.
3. D. Eliezer, D.G. Chakrapani, C.J. Altstetter, and E.N. Pugh: Metall. Trans. A, 1979, vol. 10A, pp. 935-41.10.1007/BF02658313 ↗
4. S. Singh and C. Altstetter: Metall. Trans. A, 1982, vol. 13A, pp. 1799-808.10.1007/BF02647836 ↗
5. D.G. Ulmer and C.J. Altstetter: Acta Metall. Mater., 1991, vol. 39, pp. 1237-48.10.1016/0956-7151(91)90211-I ↗
6. D.P. Abraham and C.J. Altstetter: Metall. Trans. A, 1995, vol. 26A, pp. 2849-58.10.1007/BF02669643 ↗
7. D.P. Abraham and C.J. Altstetter: Metall. Trans. A, 1995, vol. 26A, pp. 2859-71.10.1007/BF02669644 ↗
8. A.P. Zhilyaev and T.G. Langdon: Prog. Mater. Sci., 2008, vol. 53, pp. 893-979.10.1016/j.pmatsci.2008.03.002 ↗
9. R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, J. Zehetbauer, and Y.T. Zhu: JOM, 2006, vol. 58, pp. 33–39.10.1007/s11837-006-0213-7 ↗
10. Y. Mine, Z. Horita, and Y. Murakami: Acta Mater., 2010, vol. 58, pp. 649-57.10.1016/j.actamat.2009.09.043 ↗
11. Y. Mine, T. Tsumagari, and Z. Horita: Scripta Mater., 2010, vol. 63, pp. 552–55.10.1016/j.scriptamat.2010.05.027 ↗
12. Y. Mine, K. Tachibana, and Z. Horita: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3110–20.10.1007/s11661-010-0394-0 ↗
13. Y. Mine, Z. Horita, and Y. Murakami: Acta Mater., 2009, vol. 57, pp. 2993-3002.10.1016/j.actamat.2009.03.006 ↗
14. Y.K. Lee, J.E. Jin, and Y.Q. Ma: Scripta Mater., 2007, vol. 57, pp. 707-10.10.1016/j.scriptamat.2007.06.047 ↗
15. A.V. Panin, A.A. Panina, and Y.F. Ivanov: Mater. Sci. Eng. A, 2008, vol. 486, pp. 267-72.10.1016/j.msea.2007.10.002 ↗
16. R.J. Price and A. Kelly: Acta Metall., 1964, vol. 12, pp. 979-92.10.1016/0001-6160(64)90070-7 ↗
17. E. Lunarska and A. Mikeladze: Int. J. Hydrogen Energ., 1997, vol. 22, pp. 131–39.10.1016/S0360-3199(96)00164-4 ↗