journal article·2006-01

Room-temperature mechanical behavior of cryomilled al alloys

David Witkin, Bing Q. Han, Enrique J. Lavernia

Publisher page

Abstract

Room-temperature mechanical properties of cryomilled Al-7.5 pct Mg and Al 5083 alloys are discussed in the context of a duplex microstructure, which arises during processing. After consolidation via hot isostatic pressing (“hipping”), coarse-grained regions are formed in former interparticle void volumes, and these regions become elongated during extrusion. Comparison of tensile and compression testing results on both “as-hipped” and extruded materials shows that tension-compression asymmetry is the result of these coarse-grained regions and not necessarily a fundamental property of ultrafine grained Al. The strength of the extruded materials is consistent with the Hall-Petch model of strengthening by grain size refinement, but the hipped material deviates from this trend, with a lower strength despite finer average grain size. This can also be attributed to the presence of coarse-grained regions, which substract from the strength in a predictable manner and also enhance the ability of the cryomilled material to work harden.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. G.D. Hughes, S.D. Smith, C.S. Pande, H.R. Johnson, and R.W. Armstrong: Scripta Metall., 1986, vol. 20, pp. 93–97.10.1016/0036-9748(86)90219-X ↗
2. A.H. Chokshi, A. Rosen, J. Karch, and H. Gleiter. Scripta Metall., 1989, vol. 23, pp. 1679–84.10.1016/0036-9748(89)90342-6 ↗
3. G.W. Nieman, J.R. Weertman, and R.W. Siegel: Scripta Metall., 1989, vol. 23, pp. 2013–18.10.1016/0036-9748(89)90223-8 ↗
4. J.S.C. Jang and C.C. Koch: Scripta Metall. Mater., 1990, vol. 24, pp. 1599–1604.10.1016/0956-716X(90)90439-N ↗
5. R.W. Siegel and G.E. Fougere: Nanostruct. Mater., 1995, vol. 6, pp. 205–16.10.1016/0965-9773(95)00044-5 ↗
6. G.W. Nieman, J.R. Weertman, and R.W. Siegel: Nanostruct. Mater., 1992, vol. 1, pp. 185–90.10.1016/0965-9773(92)90074-8 ↗
7. J.E. Carsley, A. Fisher, W.W. Milligan, and E.C. Aifantis: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2261–71.10.1007/s11661-998-0104-3 ↗
8. D.G. Morris: Mater. Sci. Foundations, 1998, vol. 2, pp. 1–85.
9. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Progr. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
10. R.W. Siegel: MRS Bull., 1990, vol. 50, pp. 60–67.10.1557/S0883769400058681 ↗
11. J. Eckert, J.C. Holzer, C.E. Krill III, and W.L. Johnson: J. Mater. Res., 1992, vol. 7, pp. 1751–61.10.1557/JMR.1992.1751 ↗
12. D. Oleszak and P.H. Shingu: J. Appl. Phys., 1996, vol. 79, pp. 2975–80.10.1063/1.361294 ↗
13. C.C. Koch: Nanostruct. Mater., 1997, vol. 9, pp. 13–22.10.1016/S0965-9773(97)00014-7 ↗
14. W.A. Kaysser: in Powder Metallurgy: An Overview, I. Jenkins and J.V. Wood, eds., The Institute of Metals, London, 1991, pp. 168–82.
15. V.Y. Gertsman and R. Birringer: Scripta Metall. Mater., 1994, vol. 30, pp. 577–81.10.1016/0956-716X(94)90432-4 ↗
16. E.Y. Gutmanas, R. Rabinkin, and M. Roitberg: Scripta Metall., 1979, vol. 13, pp. 11–15.10.1016/0036-9748(79)90380-6 ↗
17. G.W. Nieman, J.R. Weertman, and R.W. Siegel: J. Mater. Res., 1991, vol. 6, pp. 1012–27.10.1557/JMR.1991.1012 ↗
18. P.G. Sanders, C.J. Youngdahl, and J.R. Weertman: Mater. Sci. Eng. A, 1997, vol. 234–236, pp. 77–82.10.1016/S0921-5093(97)00185-8 ↗
19. J. Tengzelius and O. Pettersson: in Powder Metallurgy: An Overview, I. Jenkins and J.V. Wood, eds., The Institute of Metals, London, 1991, pp. 114–23.
20. M.F. Ashby: in Powder Metallurgy: An Overview, I. Jenkins and J.V. Wood, eds., The Institute of Metals, London, 1991, pp. 144–66.
21. H.V. Atkinson and B.A. Rickinson: Hot Isostatic Pressing, Adam Hilger, Bristol, England, 1991.
22. R.J. Perez, H.G. Jiang, C.P. Dogan, and E.J. Lavernia: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2469–75.10.1007/s11661-998-0218-7 ↗
23. J. Lee, F. Zhou, K.H. Chung, N.J. Kim, and E.J. Lavernia: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 3109–15.10.1007/s11661-001-0185-8 ↗
24. F. Zhou, J. Lee, S. Dallek, and E.J. Lavernia: J. Mater. Res., 2001, vol. 16, pp. 3451–58.10.1557/JMR.2001.0474 ↗
25. F. Zhou, R. Rodriguez, and E.J. Lavernia: Mater. Sci. Forum, 2002, vols. 386–388, pp. 409–14.10.4028/www.scientific.net/MSF.386-388.409 ↗
26. M.J. Luton, C.S. Jayanth, M.M. Disko, S. Matras, and J. Vallone: Mater. Res. Soc. Symp. Proc., 1989, vol. 132, pp. 79–86.10.1557/PROC-132-79 ↗
27. J.D. Whittenberger, E. Arzt, and M.J. Luton: J. Mater. Res., 1990, vol. 5, pp. 2819–27.10.1557/JMR.1990.2819 ↗
28. V.L. Tellkamp, A. Melmed, and E.J. Lavernia: Metall. Mater. Trans. A, 2001, vol. 32, pp. 2335–43.10.1007/s11661-001-0207-6 ↗
29. R. Rodriguez, R.W. Hayes, P.B. Berbon, and E.J. Lavernia: Acta Mater., 2003, vol. 51, pp. 911–29.10.1016/S1359-6454(02)00494-9 ↗
30. Z. Lee, R. Rodriguez, R.W. Hayes, E.J. Lavernia, and S.R. Nutt: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1473–81.10.1007/s11661-003-0259-x ↗
31. S.L. Semiatin, K.V. Jatta, M.D. Uchic, P.B. Berbon, D.E. Matejczyk, and C.C. Bampton: Scripta Mater., 2001, vol. 44, pp. 395–400.10.1016/S1359-6462(00)00612-6 ↗
32. Y. Wang, M. Chen, F. Zhou, and E. Ma: Nature, 2002, vol. 419, pp. 912–15.10.1038/nature01133 ↗
33. G. He, J. Eckert, W. Loser, and L. Schultz: Nature Mater., 2003, vol. 2, pp. 33–37.10.1038/nmat792 ↗
34. D. Jia, K.T. Ramesh, and E. Ma: Acta Mater., 2003, vol. 51, pp. 3495–3509.10.1016/S1359-6454(03)00169-1 ↗
35. B.Q. Han, E.J. Lavernia, and F.A. Mohamed: Mater. Sci. Eng. A, 2003, vol. 358, pp. 318–23.10.1016/S0921-5093(03)00284-3 ↗
36. D. Witkin, Z. Lee, R. Rodriguez, S.R. Nutt, and E.J. Lavernia: Scripta Mater., 2003, vol. 49, pp. 297–302.10.1016/S1359-6462(03)00283-5 ↗
37. B.Q. Han, Z. Lee, D. Witkin, S.R. Nutt, and E.J. Lavernia: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 957–65.10.1007/s11661-005-0289-7 ↗
38. R.W. Hayes, D. Witkin, F. Zhou, and E.J. Lavernia: Acta Mater., 2004, vol. 52, pp. 4259–71.10.1016/j.actamat.2004.05.042 ↗
39. R.W. Hayes, R. Rodriguez, and E.J. Lavernia: Acta Mater., 2001, vol. 49, pp. 4055–68.10.1016/S1359-6454(01)00278-6 ↗
40. S. Cheng, J.A. Spencer and W.W. Milligan: Acta Mater., 2003, vol. 51, pp. 4505–4818.10.1016/S1359-6454(03)00286-6 ↗
41. D. Witkin: Ph.D. Thesis, University of California, Irvine, CA, 2005.
42. C.C. Koch: Scripta Mater., 2003, vol. 49, pp. 657–62.10.1016/S1359-6462(03)00394-4 ↗
43. W.W. Milligan: in Interfacial and Nanoscale Fracture, W. Gerberich and W. Yang, eds., Elsevier Pergamon, Amsterdam, The Netherlands, 2003, pp. 529–50.10.1016/B0-08-043749-4/08145-3 ↗
44. G.E. Dieter: Mechanical Metallurgy, 2nd ed., McGraw-Hill, New York, NY, 1976.
45. Z. Lee, D. Witkin, E.J. Lavernia, and S.R. Nutt: in Nanomaterials for Structural Applications, C.C. Berndt, T.E. Fischer, I. Ovid’ko, G. Skandan, and T. Tsakalakos, eds., Materials Research Society, Pittsburgh, PA, 2002, pp. 21–26.
46. B.Q. Han, F.A. Mohamed, and E.J. Lavernia: J. Mater. Sci., 2003, vol. 38, pp. 3319–24.10.1023/A:1025150407956 ↗
47. S.-S. Kim, M.J. Haynes, and R.P. Gangloff: Mater. Sci. Eng. A, 1995, vol. 203, pp. 256–71.10.1016/0921-5093(95)09844-5 ↗
48. B.Q. Han, Z. Lee, S.R. Nutt, E.J. Lavernia, and F.A. Mohamed: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 603–13.10.1007/s11661-003-0095-z ↗
49. B.Q. Han, E.J. Lavernia, and F.A. Mohamed: Phil. Mag. Lett., 2003, vol. 83, pp. 89–96.10.1080/0950083021000048154 ↗
50. Y.M. Wang and E. Ma: Mater. Sci. Eng. A, 2004, vols. 375–377, pp. 46–52.10.1016/j.msea.2003.10.214 ↗
51. D.J. Skinner, M.S. Zedalis, and P.S. Gilman: Mater. Sci. Eng. A, 1989, vol. 119, pp. 81–86.10.1016/0921-5093(89)90526-1 ↗
52. H.R. Last and R.K. Garret: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 737–45.10.1007/BF02648961 ↗